Side by Side Outlet Parts and Accessories
Unlike other boxes, this design fills the entire bed of the RZR 570! It is quickly installed or removed using the rubber Lock 'n Ride fasteners that are included. There is a rubber seal on the lid to prevent water, dirt, and other contaminants from penetrating the cargo stored inside. HUGE capacity of 170 Liters. You won't find a better box!
This Slip-On Silencer for the Polaris XP 900 RZR delivers an additional 4.2 horsepower with well over double the air flow compared to the stock silencer. This translates into a substantial performance increase and better throttle response. Its stainless steel construction provides excellent strength and durability. The sound level measures 95.5 DB (@ 4200 RPM) using the SAE J1287 sound test. It also features a spark arrestor that can be added for trail use.
Fuel controller not required.
Note: For optimal performance use in conjunction with SLP High Flow Intake Kit, Power Commander V Fuel Controller with SLP mapping, and SLP Clutch Kit.
This slip-on muffler for the 2014 Polaris RZR XP 1000 delivers an additional 30% more air flowcompared to the stock muffler. This translates into a substantial performance increase and better throttle response. Its stainless steel construction provides excellent strength and durability. The sound level measures 95.5 DB (@ 4200 RPM) using the SAE J1287 sound test. It also features spark arrestors that can be added for trail use.
No fuel changes required.
Fits both 2 and 4 seater models for 2014 ONLY.
With an exhaust tone that is 3 dB quieter than stock at cruising speeds, this muffler provides a much more relaxing experience when using your Trail, S or XC 900. Idle sound levels are also more subtle with a 2 dB reduction compared to stock! This muffler has superior fit and finish, with fully welded construction for excellent durability. It also comes with black ceramic coating (and an aluminum heat shield) to minimize radiant heat and give it a great look. It will reuse the stock spark arrestor and has also been flow tested and field verified to ensure optimum performance with a quieter exhaust note.
NOTE: Will not fit models with accessory bumpers or 6 point roll cages. Use part number 09-119 for these applications.
This slip-on muffler for the 2015-17 Polaris RZR XP 1000 has a higher flow rate compared to the stock muffler. This translates into a substantial performance increase and better throttle response. Its stainless steel construction provides excellent strength and durability.
The 900 RZR has never been snappier or more fun to drive! With 74% better exhaust flow than stock, this muffler provides much better top-end power as well as a more responsive bottom-end for your Trail, S, XC, or 4-seat RZR.
This slip-on muffler for the 2016-20 Polaris RZR XP TURBO delivers an additional 42% more air flow compared to the stock muffler. No fuel changes required.
This muffle will NOT fit the XP Pro Models
RZR 2015+ Plug & Play® Power Out Black 6″ License Plate Frame – 6 White LEDs Mounting Hardware included Made in the USA!
Make Model Year Polaris RZR 900 2016 - 2020 Polaris RZR XP 1000/Turbo 2015 - 2018 
Fits any vehicle with both a PCS-72S Strobe System and an XTC Turn Signal System (most newer Polaris) Plugs inline with the rear output on any XTC Turn Signal System Made in the USA!
Plug & Play® Easy Install Used with any XTC TSS – Turn Signal System Dash Mounted LED Light Made in the USA!
Fits any +12Vdc Power system Two Rear Light Wiring Options Available: 1. OEM Interface Wires Utilizing Factory Brake lights* 2. Two .75″ 3 LED Rear Red Lights (Requires Positive(+) Taillight signal for Wired Integration) Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch*** Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2018+ Polaris RZR Turbo S Models Also Fits 19-20 Polaris RZR XP 1000/Turbo models with 3rd Brake Light Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2014 Polaris RZR XP 1000 (Does not fit 2013 RZR models, use part number ATS-UNI) Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2013-2018 Ranger XP 570/900/1000 Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2019-Up Polaris General & Ranger XP 1000 Models (unless Ride Command is equipped, then you need THIS ONE) Fits 2018-Up Polaris Ranger XP 1000 (NON CREW MODELS ONLY) Connects to New Polaris Pulse Busbar for Power Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Custom Hazard/Horn Rocker Switch Included Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits Can-Am Maverick X3 Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** (Optional) front Signature lights available Made in the USA!
Plug & Play Easy Install Fits 2019 Can-Am Maverick Sport and Trail Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light (Optional) front Signature lights available Made in the USA!
Plug & Play Easy Install Fits all Defender Models Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch*** Rear Power Out for optional license plate light** Made in the USA!
Made right here in Idaho Falls! These are great magazines to show your support of SbSO and the Second Amendment!
THIS PRODUCT IS ILLEGAL IN THE FOLLOWING AREAS and we will NOT ship there:
- Colorado
- Connecticut
- District of Columbia
- Illinois
- Massachusetts
- Maryland
- New Jersey
- New York
- California
- Adding harnesses to any recreational vehicle gives the occupants the opportunity to focus on the ride, not on holding themselves in place, but when the factory seats are taller than the person sitting in it, the harness is less effective and in some cases uncomfortable. The DragonFire Harness Pass-Through Bezel is designed to prevent harnesses from falling off a riders shoulders and allow harnesses to be placed lower down for better fitment. Take the focus off your harnesses and enjoy your ride.
- Designed for Polaris OEM Seats.
- Easy to install.
- Provides clean and finished look.
- Allows for use of 4 or 5 point harnesses.
The A.T. Hotbox is plumbed into the motor’s cooling system. As the motor runs, it heats the element inside to temperatures hot enough to warm and even cook food safely. Our specially designed mounting brackets make it easy to safely and securely fasten your A.T. Hotbox. For other models, use the four 1/4 20 rivnuts already secured in the bottom of the A.T. Hotbox.
Nearly any type of cooking product you have in your kitchen drawer can be used in the A.T. Hotbox. There’s no need for special cookware for the hotbox to warm or cook food. Recommended to not cook food directly in pan – sandwich bags (freezer bags are suggested as they are thicker), Tupperware containers, parchment paper (wrapping bread to prevent sogginess), and aluminum foil (do not wrap food directly – wrap around parchment paper).
Average cook/heating time is about 2 – 2 1/2 hours. Cook raw meat such as chicken breast, stew meat, prime rib roast, boneless pork spare ribs, new york steak and taco meat. Warm up left overs, corndogs, brats, lasagna, hot chocolate, burritos – almost any item you can pull from the grocery store shelf that you would heat up or cook at home.
Vehicle Specific Mounts sold separately - please call.
Pro Armor All Aluminum doors are an industry standard. These doors are direct bolt on to your Pro XP and install in minutes. The bolt on door utilizes the OEM Paddle latch and there is absolutely no rattle with these doors. Installation is easy and the doors allow for plenty of adjustment. Our doors feature a reverse hinge system which makes getting in and out of your Pro XP much easier. The doors open almost a full 180. Doors offered in all 2020 Pro XP Polaris signature colors.
Matching graphics kit as pictured available, click HERE.
Looking for graphics to complete the look on your 2020 RZR® Pro XP and color ways for your Pro Armor® RZR® Pro XP Doors and side panels. Look no further to a color and theme matched white/blue graphics kit. Consists of a white/blue color scheme this graphic kit will match the colors on your white/blue RZR® Pro XP. Made from 3M brand vinyl and backing for a strong application and withstand elements and fade.
This Graphic Kit only fits Pro Armor "Pro XP" doors 2020 model vehicle found by clicking HERE.
INTRODUCING THE GUN DEFENDER
- Injection molded design offers superior strength as well as high water and dust resistance
- Defender design accommodates standard length and longer rifle barrels
- Additional width in the right places eliminates interference with bolts and target style turrets
- Fully customizable hybrid interior structure ensures a secure hold and protection for any gun
- Accommodates rifles up to 53" in length
- Accommodates turret style scopes up to 50mm
- 1.25” receiver slider makes for easy on, and easy off of the machine
- ATV Mount sold HERE
- UTV Bed Mount sold HERE
- Hitch Mount sold HERE
New colors for 2020! These are limited to what we have on hand!
- Record Tracks
- GPX file import and export
- Drop customized waypoints and set waypoints as destination.
- Glove friendly 4" touch-screen
- Pre-loaded topo maps with layers
- Color Display
- Plan & record entire trail systems
- Tachometer
- Bluetooth phone and headset interaction
- Lap Timer
- Track up to 20 buddies (Cellular service not required)
- Emergency beacon
- GPS satellites tracker
Hess Motorsports Rear Mounted Radiator Kit• Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts to Stock Rollcage Mounting Points• Maintains Excellent viewing are through rear of car• High Output Fan• Dual Pass Turbo IntercoolerKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Overflow Bottle, Caps, and all other Hardware for installation.Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit
Made to order: Estimated 1 week build time
• Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts in Stock Bed• Maintains Excellent Viewing Area Out The Back of Car• High Output FansKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Caps, and all other Hardware for installation.Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch KitMade to order: 1 week build time
• Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts to Stock Rollcage Mounting Points• Maintains Excellent Viewing Area Out The Back of Car• High Output FanKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Overflow Bottle, Caps, and all other Hardware for installation.Options: Fan Override Kit with Switch +$100Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit
Made to order: Estimated 1 week build time
Made to order: 1 week build time
Please be sure to specify any special wiring or build needs in checkout notes. (ex. Turbo on a non turbo car, want to keep stock radiator up front as rear, etc...)
• Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts to Stock Rollcage Mounting Points• Maintains Excellent Viewing Area Out The Back of Car• High Output FansKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Caps, and all other Hardware for installation.Options: Fan Override Kit with Switch +$100Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
Puller works for ALL models of Polaris except the RZR 570EPS.
Universal Steering Wheel Puller For Polaris UTVS
