Side by Side Outlet Parts and Accessories
With an exhaust tone that is 3 dB quieter than stock at cruising speeds, this muffler provides a much more relaxing experience when using your Trail, S or XC 900. Idle sound levels are also more subtle with a 2 dB reduction compared to stock! This muffler has superior fit and finish, with fully welded construction for excellent durability. It also comes with black ceramic coating (and an aluminum heat shield) to minimize radiant heat and give it a great look. It will reuse the stock spark arrestor and has also been flow tested and field verified to ensure optimum performance with a quieter exhaust note.
The 900 RZR has never been snappier or more fun to drive! With 74% better exhaust flow than stock, this muffler provides much better top-end power as well as a more responsive bottom-end for your Trail, S, XC, or 4-seat RZR.
This slip-on muffler for the 2016-20 Polaris RZR XP TURBO delivers an additional 42% more air flow compared to the stock muffler. No fuel changes required.
This muffle will NOT fit the XP Pro Models
This new cap is very robust in its construction to significantly reduce the binding caused by the stock cap in RZR Turbo and RS1 models. This decreases heat and friction, improves clutching consistency and performance and lengthens clutch and belt life. One key to our design is the tight tolerance bronze bushing that we use. This bushing is flanged to insure that it stays in place and the tighter tolerance between the bushing and the spider nut helps further reduce heat and friction caused by cap bushing bind to eliminate the problem rather than just deal with the headaches the extra heat and friction create. This kit comes complete with a new spider nut that has been machined in the castle area to allow its use with the tight tolerance bushing.
Great for adding LED lighting to the bottom of the A pillar. Sold as a pair for left and right side. Brackets may not be EXACTLY as pictured, as they differ from model to model slightly.
Longer bolts or spaces MAY be require for the 570, 800, 900XP models
- 3/16” Thick Hard Coated Polycarbonate (both sides).
- Attaches with our Rubber Fast Straps.
- Tool-less removal.
- Rubber edge trim protects and seals along the hood.
- Add an optional hand wiper from the drop down menu.
- Slide vent allows airflow on warm days.
- DOT Rated and stamped with EMP® logo (you should check your local regulations if making it street legal).
- Made and/or assembled In Cleveland Ohio.
RZR 2015+ Plug & Play® Power Out Black 6″ License Plate Frame – 6 White LEDs Mounting Hardware included Made in the USA!
Make Model Year Polaris RZR 900 2016 - 2020 Polaris RZR XP 1000/Turbo 2015 - 2018 
Easy Install Black 6″ License Plate Frame with full spectrum 6 white LEDs Hardware Included Made in the USA!
Fits any vehicle with both a PCS-72S Strobe System and an XTC Turn Signal System (most newer Polaris) Plugs inline with the rear output on any XTC Turn Signal System Made in the USA!
Plug & Play® Easy Install Dash mountable left/right green LED turn signal arrows Fits any vehicle utilizing a XTC Power Products Turn Signal System Plugs inline with front turn signal harness Made in the USA!
Plug & Play® Easy Install Used with any XTC TSS – Turn Signal System Dash Mounted LED Light Made in the USA!
Plug & Play Easy Install Fits 2017-2019 Yamaha Wolverine Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch*** Rear Power Out for optional license plate light** Made in the USA!
Fits any +12Vdc Power system Two Rear Light Wiring Options Available: 1. OEM Interface Wires Utilizing Factory Brake lights* 2. Two .75″ 3 LED Rear Red Lights (Requires Positive(+) Taillight signal for Wired Integration) Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch*** Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2018+ Polaris RZR Turbo S Models Also Fits 19-20 Polaris RZR XP 1000/Turbo models with 3rd Brake Light Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2017-2018 Polaris XP1000/Turbo RZR’s with Factory Installed Ride Command Fits 2019-2020 RZR XP1000/Turbo Models Without 3rd Brake Light Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2015-2018 Polaris RZR XP 1000/Turbo Models Fits 2016-Up Polaris RZR 900 with LED Tail lights Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2014 Polaris RZR XP 1000 (Does not fit 2013 RZR models, use part number ATS-UNI) Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2020 Polaris RZR PRO XP Models Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2013-2018 Ranger XP 570/900/1000 Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2019 Polaris Ranger with Factory Installed Ride Command (for non Ride Command, click HERE)
Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2019-Up Polaris General & Ranger XP 1000 Models (unless Ride Command is equipped, then you need THIS ONE) Fits 2018-Up Polaris Ranger XP 1000 (NON CREW MODELS ONLY) Connects to New Polaris Pulse Busbar for Power Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Custom Hazard/Horn Rocker Switch Included Rear Power Out for optional license plate light** Made in the USA!
Fits:
- All Polaris RZR PRO 2 and 4 seat models
Features:
- All new TRR (Tool-less Rapid Release) mounting systems allows you to install and remove the windshield in seconds
- Dual Multi-position, tinted, scooped "Comfort Flow" Vent system allows adjustable airflow as desired
- Multi-position tinted dual scooped vents to help moderate airflow as desired
- Constructed from premium 1/4 inch, premium Hard-Coated & scratch resistant Polycarbonate
- Includes automotive bulb seal at the hood to provide a tight seal
Plug & Play Easy Install Fits 2016-2018 Polaris General 1000 Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Light Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2020 Kawasaki KRX 1000 Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits ALL Honda Talon Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2015-2019 Honda Pioneer 1000/700 Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits Can-Am Maverick X3 Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** (Optional) front Signature lights available Made in the USA!
Plug & Play Easy Install Fits 2019 Can-Am Maverick Sport and Trail Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light (Optional) front Signature lights available Made in the USA!
Plug & Play Easy Install Fits all Defender Models Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch*** Rear Power Out for optional license plate light** Made in the USA!
Made right here in Idaho Falls! These are great magazines to show your support of SbSO and the Second Amendment!
THIS PRODUCT IS ILLEGAL IN THE FOLLOWING AREAS and we will NOT ship there:
- Colorado
- Connecticut
- District of Columbia
- Illinois
- Massachusetts
- Maryland
- New Jersey
- New York
- California
Fitment:
- 2017-2018 Can-Am Maverick X3, every model
- 2013-2018 Can-Am Maverick, every model
- 2011-2018 Can-Am Commander, every model
- 2008-2018 Can-Am Renegade, every model
- 2006-2018 Can-Am Outlander, every model
- All Years - Can-Am Defender, every model
- 2018 Can-Am Traxter, every model
- ALL Can-Am UTV's and ATV's from 2007 to 2020 (not 2018's with Smart Lok, or 2020+ European Models with Brake Traction Control, "BTC")
Applicability: 2014+ Polaris RZR (excludes Polaris RZR RS1, RZR 170 and RZR PRO XP models)
Features:
- Designed to be a replacement for your plastic seat base
- Compatible with stock RZR slider
- Allows you to use your 570/800/XP900 seats in a newer XP 1000 or S 900 and vice versa
- Includes seat bases and latch housing (no latch spring or handle)
- Weight: 9 lbs
- Dimensions per mount: 15 in x 12 in x 4 in
Features:- Direct replacement for the OEM Polaris plastic valve
- Tested to 500+ horsepower
- Billet anodized aluminum construction with high temperature sealing rings
- Does not stick like the OEM valve is prone to
- Has the “Blow Off Valve” sound that turbo customers crave
- Includes a pre filter to keep dirt/sand out of the valve
- Adding harnesses to any recreational vehicle gives the occupants the opportunity to focus on the ride, not on holding themselves in place, but when the factory seats are taller than the person sitting in it, the harness is less effective and in some cases uncomfortable. The DragonFire Harness Pass-Through Bezel is designed to prevent harnesses from falling off a riders shoulders and allow harnesses to be placed lower down for better fitment. Take the focus off your harnesses and enjoy your ride.
- Designed for Polaris OEM Seats.
- Easy to install.
- Provides clean and finished look.
- Allows for use of 4 or 5 point harnesses.
The A.T. Hotbox is plumbed into the motor’s cooling system. As the motor runs, it heats the element inside to temperatures hot enough to warm and even cook food safely. Our specially designed mounting brackets make it easy to safely and securely fasten your A.T. Hotbox. For other models, use the four 1/4 20 rivnuts already secured in the bottom of the A.T. Hotbox.
Nearly any type of cooking product you have in your kitchen drawer can be used in the A.T. Hotbox. There’s no need for special cookware for the hotbox to warm or cook food. Recommended to not cook food directly in pan – sandwich bags (freezer bags are suggested as they are thicker), Tupperware containers, parchment paper (wrapping bread to prevent sogginess), and aluminum foil (do not wrap food directly – wrap around parchment paper).
Average cook/heating time is about 2 – 2 1/2 hours. Cook raw meat such as chicken breast, stew meat, prime rib roast, boneless pork spare ribs, new york steak and taco meat. Warm up left overs, corndogs, brats, lasagna, hot chocolate, burritos – almost any item you can pull from the grocery store shelf that you would heat up or cook at home.
Vehicle Specific Mounts sold separately - please call.
Please note: Bimini Roof with sun visor or Sport Roof needed for installation (sold separately)
- Weather-resistant bags
- Hold your gear safely and securely while riding
- Includes 2 overhead soft bags mounted on a tubular frame that sits between cage and roof
- 2.4 Gal (9L) total capacity
- Sold as pair
