• Designed to pull even the toughest of clutches off the tapered crankshaft, made of high quality heat treated material
• Polaris RZR Fitment: 2011-21 900 Models, 2014-21 1000 Models, 2016-20 Turbo Models (Will not fit Pro XP RZR or 2021 Turbo Models)
• Polaris General Fitment: 2016-21 1000 Models
• Polaris Ranger Fitment: 2013-19 900, 2017 1000 XP, 2017-18 1000 XP Crew (EXCEPT Diesel)

• Two heated clamp-on grips
• No adhesive required for installation
• Kit includes rubber grips, high/low round rocket switch, female spade connectors and cable tie
• Maximum 40 watts (20 watts per grip) at 14 volts
• Made in the U.S.A.

• Mount accessories to the roll cage with these clamps
• Mount windshields, lights, mirrors, etc.
• Quick-release without tools

2017-2017 ARCTIC CAT WILDCAT X 2017-2017 ARCTIC CAT WILDCAT X LIMITED 2020-2021 ARCTIC CAT WILDCAT XX 2018-2019 TEXTRON WILDCAT XX

Kawasaki

Fits 2015-2020 RZR 900 Trail, 900s, and 1000s models.  Includes one front and one rear bumper.

for two door models, click HERE

• Designed to fit in channel of Polaris roll cage.
• Mounts to factory door frame.
• Requires drilling in factory door skin.
• Once installed, can be quickly removed.
• Tested at -15° F to resist cracking.

for four door models, click HERE

• Designed to fit in channel of Polaris roll cage.
• Mounts to factory door frame.
• Requires drilling in factory door skin.
• Once installed, can be quickly removed.
• Tested at -15° F to resist cracking.

The GroundHog Max truly makes preparing food plots a one-man job. The GroundHog Max plow weighs 69 pounds and comes fully assembled. Easy to use "transport mode" allows the GroundHog to get to any remote food plot that your ATV/UTV can reach. The GroundHog Max can plow from 3-7 MPH and can even be used to plow in reverse. Although the GroundHog Max is half as wide as a normal plow, it makes creating food plots a breeze. In some states, land owners are required to have firebreaks around their property.  This plow can not only be used for making food plots, but also makes a great tool for creating firebreaks.  Creating firebreaks is now easier than ever using the GroundHog Max! In addition, the plow may also be used for duck hunting, landscaping and weed control.

Kit Contents: - Aluminum Hawse Fairlead (Magnetic) - Rubber Line Stopper (Magnetic) - Wiring and Receiver - Installation Hardware (Stainless Steel)

Utilizing magnetic auto-stop technology, the VIPER Winch Auto-Stop Fairlead replaces a traditional aluminum hawse fairlead and provides long-term protection for your winch and its components. When the magnets inside the rubber line stopper get close to the fairlead, the winch stops automatically. This eliminates over-winding, and prevents long-term stress on the winch, strain on the synthetic rope, and damage to attached accessories.

Features:

• • IP67 Waterproof Rating
• • Wireless Remote System with unique frequency
• • Flush Mount Dash Switch
• • Planetary metal gear train and permanent magnet motor
• • Automatic brake
• • Limited Lifetime Warranty (winch) / Rope (1 year)

Price reflects LOCAL PICKUP ONLY - Idaho Falls, ID  Contact direct for shipping, as it varies due to time of year but is generally $150-250 more.

Enhance the rider protection in your vehicle with a set of these high-value, versatile Canvas Upper Half Doors. They install easily atop the stock door panels in designated, integrated mounting locations, and they provide shade and reliable protection from the elements in cold weather conditions These Polaris Engineered doors have zip-out clean poly windows that provide light and visibility or, when removed from the vehicle, increase the airflow into the cab area. The 23 oz. mold resistant and UV stable material give these doors strength and durability against harsh weather conditions. The steel tube framework and vinyl crack resistant material all reinforce the strength of the doors. Once installed, these doors swing open and closed with the stock doors to provide rider ingress and egress. Combine with full windshield, lower doors, rear panel and roof for complete coverage in cold weather conditions.

Fits curved or straight LED bars.

• Fitments: Polaris Ranger 500 570 900 1000.The brackets fits almost all Polaris Ranger's Pro-fit cage(Please check the fitment).
• Rust-resisting Bracket: made with precision laser cut steel, put on a pneumatic break, and then powder coated black to provide you with a lifetime of resistance against wear.
• Wide Compatibility: The brackets works with most 50-52”led light bars and can be mounted low or up high since they clamp to the cage.
• Easy Install: Easy to install, no drilling or cutting required.  Will Not fit full Tilt out windshield.
• Package Includes: 2 pro-fit cage mounting brackets and hardware(does not come with led light bar).

Features:

• Stainless Steel Construction.
• Black Powder Coat Finish.
• Easy to install. Instruction of Installation is NOT Included.
• Attaches to windshield bracket - will not work without the windshield!

This filter clamps on for a more secure connection than the stock slip on air filter. Desertcraft has developed this filter for severe duty.  This filter comes with an optional bracket to better secure and support the filter in the air box.  The Desertcraft filter meets or exceeds in every category over the competition in this segment and it has the advantage of being serviceable. You will definitely save in the long run over one time use, throwaway filters. The specialty filter media is highly durable and has an efficiency rating that far exceeds the stock element (exceeds %). TheDesertcraft filter is a dry element that requires no special cleaner or oil to service. It is serviceable !!!! ?To service the filter you simply blow it out from the clean side with compressed air or vacuum from the dirty side.  The filter can be soaked in a soapy solution rinsed and air dried too.

These are designed to keep the stuff that flies off of the front tires and shoot right back to the rear lower fender, trailing arms, radius rod, axles etc. It really puts a beating on those components, chipping and sand blasting them. Those nicks and dings not only ruin the finish but are doing untold damage long term?. We came up with our Fender Skirts to only protects the rear lower fender, but more importantly the rear components.? ??You will feel the difference right away!? These are not a sheet product or rubber. They are a cast Polyurethane product that we mold in house. This allows us to choose a material that is hard enough to maintain a thin cross section, holds it's shape and is tough enough to take a beating but flexible enough to get out of the way when it needs to.? Easy install in less than 30 minutes.

This filter will fit the Can Am X.   Desertcraft has developed this filter for severe duty.  The Desertcraft filter meets or exceeds in every category over the competition in this segment and it has the advantage of being serviceable. You will definitely save in the long run over one time use, throwaway filters. The specialty filter media is highly durable and has an efficiency rating that far exceeds the stock element for effiency. The Desertcraft filter is a dry element that requires no special cleaner or oil to service. It is serviceable !!!! To service the filter you simply blow it out from the clean side with compressed air or vacuum from the dirty side.  The filter can be soaked in a soapy solution rinsed and air dried too.

This filter will also fit the RZR 1000S and the ACE 900 and the General 1000.  This filter clamps on for a more secure connection than the stock slip on air filter. Desertcraft has developed this filter for severe duty.  The Desertcraft filter meets or exceeds in every category over the competition in this segment and it has the advantage of being serviceable. You will definitely save in the long run over one time use, throwaway filters.? The specialty filter media is highly durable and has an efficiency rating that far exceeds the stock element (exceeds %). The Desertcraft filter is a dry element that requires no special cleaner or oil to service. It is serviceable !!!! ?To service the filter you simply blow it out from the clean side with compressed air or vacuum from the dirty side.  The filter can be soaked in a soapy solution rinsed and air dried too.

Replaces Polaris part number 7082115.  MADE IN THE USA

The Super Seal Gasket for your factory Polaris RZR XP 900 airbox was designed and developed to eliminate the need for grease when installing your airfilter. The seal takes up the gaps associated with the wavy and uneven surfaces found on the injection molded airbox, without putting additional stress on the assembly.

RZR XP900 (Box Pre-Filter) "Foam Buddy"

Fits: All RZR 900XP models 2011-2014 with stock airbox and OEM filter.

Talon (In Box Pre-Filter) For Stock Air Box Lid - Foam Buddy

Fits: All Honda Talon models 19-21 with stock airbox and OEM filter #17215-HL6-A00  Also works with RC OR10551

This sleeve fits OVER your existing air filter OE number 11013-0782 for your 2020+ KAWASAKI KRX.  Adds an additional layer of protection from larger debris while minimizing flow restriction.  Great for keeping mud and leaves from clogging the filter media fins.  Pairs well with the R2C Washable Air Filter for you Polaris Ranger!

Introducing The Weld It Yourself RADIUS Cage Kit For The Yamaha YXZ! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle.

Introducing The Weld It Yourself FLAT Cage Kit For The Can-am X3 MAX! This Cage Is Built With .120 Wall DOM Main Tubes And .095" DOM Support Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle.

Introducing The Weld It Yourself RADIUS Cage Kit For Your 2014+ Polaris XP1000 2 Seater! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle.

Introducing the weld it yourself RADIUS cage kit for your 2014+ Polaris XP1000 4 Seater! This cage is built with .120" &  .095" DOM tubing that can be either MIG or TIG welded without the use of a specialized fixture - just install the supplied connectors to the stock cage locations and piece together the cage on the vehicle.

Introducting The Weld It Yourself RADIUS Cage Kit For Your 2019+ Polaris XP1000 2 Seater! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. Please Note The Year Range Selection, As The 2014-18 Cages Have A Lower Dash Bar Than Their 2019+ Counterpart (primarily Due To The New Raised Dash Design With Polaris Ride Command®)

Introducing The Weld It Yourself Cage Kit For The RZR PRO XP 4 Seater! This Cage Is Built With .120 Wall DOM Main Tubes And .095" DOM Support Tubing That Can Be Either MIG or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle.

Note: Requires Honda Accessory Switch Plate with Voltmeter and Sub-Harness (Sub-Harness included with Winch Mount Kit). 1000X-4 also requires Honda Accessory Power Harness. Not compatible with both Rear Panels.

The Particle Separator for the Honda Talon is only available directly through Honda and authorized Honda dealers.

Don’t let the elements slow you down. A clogged filter chokes your engine of power. The S&B Particle Separator lets you play in harsh conditions, as it was designed to protect from water, snow, sand and fine dust. The Particle Separator ejects 94% of the dusty air before it reaches your stock filter.

• Separates over 94% of dust before it reaches the air filter
• Integrates into Pro XP body for factory fit and finish or to the Roll bar
• Scavenge fan only runs when needed
• Connects to your pulse bus bar power
• Protects your engine. Overloaded filters can collapse resulting in a dusted motor.
• Replaces the stock intake tube with high temp crosslink polyethylene so it will hold shape in even the hottest conditions.

Puts the dust where YOU want it.   Fits the FIRST GENERATION  PARTICLE SEPARATOR ONLY NOT the 2.0 models.

Stay warmer outside longer with a top-quality Polaris General 1000 Cab Heater with Defrost for 2020-current models from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight and includes everything you need to install it into your Polaris General 1000 (2020-current) including both the standard and crew cab models.

If you do not have the Rockford Fosgate Stage 3 & 4 Audio System on your machine you will want to purchase our SSHK115 heater kit.

The NEW pre-thermostat plumbing gives you quicker and more consistent heat! Don’t pay $100 for a thermostat bypass valve like you do with our competitor’s kits.

It’s built with SPAL high-performance fans, ensuring longevity and high performance and the fan comes with a 3-year warranty.

https://youtu.be/ShCpin1USTc

Stay warmer outside longer with a top-quality Polaris General 1000 Cab Heater with Defrost for 2016-current models from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight and includes everything you need to install it into your Polaris General 1000 (2016-current) including both the standard and crew cab models.

If you have the Rockford Fosgate Stage 3 or 4 Audio system you will want to purchase the SSHK116 heater kit.

The NEW pre-thermostat plumbing gives you quicker and more consistent heat! Don’t pay $100 for a thermostat bypass valve like you do with our competitor’s kits.

It’s built with SPAL high-performance fans, ensuring longevity and high performance and the fan comes with a 3-year warranty.

Stay warmer outside longer with a top-quality Can-Am Maverick Trail Cab Heater with Defrost for 2018-current models from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight and includes everything you need to install it into your Can-Am Maverick Trail (2018-current).

It’s built with a SPAL high-performance blower, ensuring longevity and high performance and the fan comes with a 3-year warranty.

Stay warmer outside longer with a top-quality Polaris RZR 1000 Cab Heater with Defrost for 2014-2018 models from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight and includes everything you need to install it into your Polaris RZR 1000 (2014-2018) including both the standard and crew cab models.

The NEW pre-thermostat plumbing gives you quicker and more consistent heat! Don’t pay $100 for a thermostat bypass valve like you do with our competitor’s kits.

It’s built with SPAL high-performance fans, ensuring longevity and high performance and the fan comes with a 3-year warranty.

https://youtu.be/3hk7Pzjarik