Side by Side Outlet Parts and Accessories

  • Published On: October 30, 2019

    Fits the older RZR 900 XP models.  This item it not in the original box and is missing the mounting hardware so all sales are final and AS IS.

  • Published On: October 30, 2019

    hardware and original package is missing, hence the clearance.  ALL SALES FINAL  this is the last of these bumpers and is WHITE, not black as pictured, and does NOT come with the aluminum insert.

  • Published On: October 30, 2019

    BG Engine Performance Concentrate provides critical protection for small engines.

    Four-cycle engines run hot, challenging the lubrication capabilities of engine oil. Under high temperature operating conditions, engine oil additives will deplete rapidly, causing oil to oxidize. Oxidation thickens oil and causes residues that combine with dirt and debris to form engine sludge. This sludge results in poor performance, excessive oil consumption and severe engine wear.

  • Published On: October 30, 2019
      The Tusk ATV Lock-On Heated Grips are the perfect accessory for anyone using their RZR in cold weather. This plug and play kit comes with 2 molded comfortable hand grips with locks, adjustable heat controller with 5 modes and an easy to connect wire harness with fuse.
      • Simple to use Lock-On heated grips for passenger grab handle.
      • Inner diameter 7/8"
      • Easy installation.
      • Contains 2 locking molded grips, 5 mode heat controller and wire harness.

     

  • Published On: October 30, 2019

    Fitment: 2009-2017 Polaris Sportsman 550/570/850/1000 2009-2017 Polaris Scrambler 550/850/1000 Replaces the thumb throttle lever in the following OEM housings: 2010359 and 2010336 Aluminum CNC Billet Parts High quality Aluminum material repalce the origianl 2-piece plastic parts,provide long and durable strength

  • Published On: October 30, 2019

    Polaris wants an arm and a leg for these, so get them from us for half price!

  • Published On: October 30, 2019

    Fits Polaris and Arctic Cat 1-3/4" roll cage bars Made to fit up to 2 lb. extinguishers Made from billet aluminum Comes in set of 2

  • Published On: October 30, 2019
    • Fits 2014+ RZR 1000 XP, Turbo and Maverick X3
    • Protects your frame from rock damage
    • Design bolts to itself, no drilling or loosening factory hardware
    • Comes in a set of 2 for the rear of the RZR or X3
    • Mud flaps are made from lasercut 1/8" durable scratch-resistant ABS
    • Includes stainless steel hardware and 16Ga brushed stainless steel brackets
  • Published On: October 30, 2019
    • Heavy duty
    • Highest quality materials
    • Includes chain, shaft and gear
    • FITMENT

      • Polaris RZR XP 1000 : 2014+
      • Polaris RZR XP 1000 High Lifter Edition : 2015+
      • Polaris RZR XP 1000 Trails & Rocks Edition : 2017+
      • Polaris RZR XP 4 1000 : 2014+
      • Polaris RZR XP 4 1000 High Lifter Edition : 2016+
      • Polaris RZR S 1000 : 2016+

    [contact-form][contact-field label='Year' type='name' required='1'/][contact-field label='Make' type='email' required='1'/][contact-field label='Model' type='url'/][/contact-form]

  • Published On: October 30, 2019
    • Preventative maintenance item
    • Can save you costly on repairs
    • Protects seal from dirt, dust and debris
  • Published On: October 30, 2019
    • Preventative maintenance item
    • Can save you costly on repairs
    • Can be removed without splitting the cases
    • Protects seal from dirt, dust and debris from belt failure
    • Prone to failure from silicone during sealing the belt box from snorkels
    • Larger surface area for siliconing belt box for snorkels
  • Published On: October 30, 2019

    Our crank seal upgrade kit is a preventative maintenance item designed to protect the crank seal from belt failure and silicone used while snorkeling a unit. There is no need to split the cases during this installation, which will save you time, money and the ride you are on if failure occurs on a ride. This kit replaces the Polaris OEM oil seal, part #: 3610176 and 3610284 (Seal-Flange,Lube Viton).

    Polaris
    • General 1000 - All years & models
    • Ranger 900 - All years & models
    • Ranger 1000 - All years & models
    • RZR 900 - All years & models (Including Turbo Models)
    • RZR 1000 - All years & models (Including Turbo Models)
  • Published On: October 30, 2019
    • Eliminates the rattling start up noise
    • Eliminates the issue of initial start up timing jump
    • Maintains tension while RZR is at extreme angles
    • Designed specifically for Polaris engines
  • Published On: October 30, 2019

    These are the toughest head studs on the market.  Race proven in our own 2014 RZR 1000 Big Bore Kit.  These same studs fit every 900 and 1000 Polaris Motor.

  • Published On: October 30, 2019
  • Published On: October 30, 2019

    High Lifter trailing arms provide more clearance than stock arms. With our trailing arms, your rear tires will easily roll over most anything in their path. High Lifter’s research and development team engineered the trailing arms to give you 4 ½” of added clearance where you need it the most – right in front of your rear tires. Our arched design eliminated most of the drag and scraping that can be seen in some of the roughest and rockiest terrain. Our trailing arms keep the driveline angles the same as stock with no added wear and tear to other parts. These are a great choice for replacing a stock trailing arms and will hold up whether you are trail riding or racing.

    Features:

    • Crafted from 1 ½ x ¼” wall steel
    • 4 ½” added ground clearances in front of the rear tires
    • Driveline/suspension angles stay the same as factory
    • Works with any lift kit bolted to top of shock
    • Easy bolt-on kit complete with photo instructions
    • One kit replaces both trailing arms
    • Limited Lifetime Warranty through Manufacturer
  • Published On: October 29, 2019

    Noises coming from your driveline?  We can fix it!  There are several packages we offer to get you back up and running.  Prices are for rebuild/repair only - you ship to us on your dime, we ship back on ours.  Read below for more details.

    [contact-form][contact-field label='Tracking number when you have shipped your old driveline:.' type='text' required='1'/][contact-field label='Name' type='name' required='1'/][contact-field label='Phone or Email' type='text' required='1'/][contact-field label='Year, make , model' type='text' required='1'/][/contact-form]

  • Published On: October 29, 2019

    FITMENT

    • CFMOTO UForce 1000 : 2019+

    FEATURES

    • 1.5” forward offset
    • Fit up to a 30” tire
    • Made with 1.5” diameter steel tubing
    • High clearance bends give you extra ground clearance without a lift
    • Chromoly steel ball joint housings and pivot blocks
    • UV-resistant powder coat finish
    • Backed by a lifetime warranty
  • Published On: October 28, 2019
  • Published On: October 28, 2019

    TulTex Brand Shirt, sizes run about one size SMALLER in female sizes!

     

  • Published On: October 28, 2019

    TulTex Brand Shirt, metallic ink screen printing

  • Published On: October 27, 2019

    Replaces the rollers that ride on the outside of the secondary clutch - the ones visible when you pull the cover off.  Replace any that have flat spots to prevent unnecessary wear to the clutch housing.

  • Published On: October 27, 2019
    • Replaces OE 0823-421/0823-497
    • EPI Performance is the Original Severe Duty Belt!
    • Deep double cog style reduces clutch heat
    • Our exclusive compound provides outstanding adhesion to the clutch surfaces and withstands extreme temperatures
    • Designed for severe duty applications - high horsepower, high torque and extreme riding environments!
  • Published On: October 27, 2019
    • Replaces OE 417-300-383, 417-300-391, 422-280-652, 422-280-654, 715-300-383
    • EPI Performance is the Original Severe Duty Belt!
    • Deep double cog style reduces clutch heat
    • Our exclusive compound provides outstanding adhesion to the clutch surfaces and withstands extreme temperatures
    • Designed for severe duty applications - high horsepower, high torque and extreme riding environments!