Side by Side Outlet Parts and Accessories

Current Production: Black and Red are kept in stock, other colors are Built in 2-4 Weeks

Features:

• Built from .095” steel tubing
• Protection from Side Impact
• Heavy-Duty steel
• Mounts to stock locations

Fits: (19+) Honda® Talon 1000R/X

Does not Fit:  (20+) Honda® Talon 1000 X-4

Current Production: Blue and Black kept in stock, other colors built in 2-4 Weeks

Features:

• Built from .095” wall, heavy-duty steel tubing
• Integrated winch mount (see mounting options)
• Fits 6” UTV Fairlead (6” hole spacing)
• Universal light bar mount (see mounting options)
• Weighs approximately 30 lbs.
• Fairleads and lights sold separately

HD Defender Bumper Fits: (19+) Honda® Talon 1000R/X (20+) Honda® Talon 1000 X-4

This performance slip-on muffler for the Polaris RZR 800 is designed for maximum airflow without substantially increasing sound level output. it provides a 79% increase in airflow over the stock silencer. This results in a substantial performance improvement, showing better throttle response as well as top-end horsepower. The sound levels are within 2 decibels of stock (90 dBA on the SAE J1287 test) for a trail friendly performance muffler. It also features a removable  spark arrestor.

No fuel controller required.

• Works with most windshields, doors, and rear windows
• Rain channel in front to control water run-off
• Easy to install- no drilling required
• Comes complete with all mounting hardware & detailed instructions

Transmission Bearing Kit SANDCRAFT has created ALL NEW UTV Bearings […]

The Agency Power High Flow Air Intake System for the Polaris RZR RS1 is a great upgrade to help improve air flow from the intake to the engine.  Not only does the intake gain very respectable horsepower, it also improves the drivability through the entire RPM range. The air intake kit features a roto-molded plastic tube design that faces towards the rear of the vehicle.  Each intake includes a Polaris mesh inspired cross brace and our high flow dry filters. The new intake tubes and filters replace the factory intake system that runs to the roof of the RS1.  This new design aids in increased air flow while filtering out more particulates than stock.  As tested on the dyno, Agency Power saw a peak gain of 8 horsepower from just the air intake and an 11 horsepower gain with our custom VR Tuned ECU Flash. The easy modification of adding the Agency Power Air Intake System will help your Polaris RZR RS1 breathe better for greater performance. This simple upgrade is a must have for those running aftermarket roll cages and need an air intake solution.  

The Agency Power cold air intake has been engineered from the ground up to be a direct replacement for the factory Polaris RZR RS1 intake.  Starting from 3D printed components and real world desert testing, each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. The custom high flow Agency Power air filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filters to be purchased separately. 

The new Agency Power roto-molded tubes replace the factory intake pipe system. The dual roto-molded plastic tubes have been designed not only to enhance the performance of your RS1 but also an easy installation to replace the factory air intake system. Each tube has a smooth inside that helps eliminate any turbulent air flow. The intake tubes get added support from a cross brace that comes in matte black, gloss white or red. The intake tube is designed to be strong and durable as the factory tube allowing it to hold up to the harsh elements. The dual filters mount uniquely on the intake tubes to grab more air and add great styling.

Features:

• Lightweight Roto Molded XLPE Plastic Constructed Tubes
• Dual Black Intake Tubes
• Unique Filter Mounting
• High Flow and Re-Usable Air Filters
• Gains of 8-11 Horsepower
• Cross Bar Available in Matte Black, Gloss White and Gloss Red
• Bolt On
• Easy Installation

Fitment:

• 2018+ Polaris RZR RS1

Note:

• For maximum performance, order the VR Tuned ECU Flash as well. 
• For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears 
• Understanding cleaning and filter technology – Read Here

Add style to the interior of your Can-Am Maverick X3 with the new Agency Power carbon fiber center console.  The center console is a full carbon fiber OEM replacement for the factory black plastic piece.  It features cup holders and cutouts for the shifter trim and grab handle.  The carbon fiber center console is easy to add additional switches to for lighting or products like our valvetronic exhaust system.  The console is a 2x2 carbon weave with a high gloss clear coat finish.  As an OEM replacement, it fits in place with the factory push clips and bolts.  This front part does fit the 2 door X3 as well as the 4 door X3 Max.  Agency Power has been in the carbon fiber business for many years.  Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts.  The carbon fiber center console is a great upgrade to make you stand out amongst other Can-Am X3 owners!  Other carbon fiber interior and exterior parts coming soon! 

Features:

• Carbon fiber construction
• Designed as an OEM replacement
• Lightweight design
• Easy to add extra switches

Fitment:

• 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 Door
• Will also fit the front of the Can-Am X3 Max

Top of the line LED whips. These 187 Whips can stream, cascade, chase, etc.  They are Bluetooth controlled via the Bledim app and are user programmable.  They can also move to music/sound via the app.  *Comes with 1 controller and "Y" harness***

Current Production: Black is kept in stock, other colors Built in 2-4 Weeks

Features:

• Built from .095" steel tubing
• Accepts most standard and wide spool winches up to 4,500lbs.
• Fits 6" UTV Fair Lead (6" hole spacing)
• Does not fit 4-7/8" UTV Fair Lead.
• Weighs approximately 24lbs.
• Holes will need to be drilled through the front fascia
• Fairleads and Lights sold separately

Bumper Fits: 

• (2013-2018) Can-Am® Maverick
  • DPS, XC, X XC, X MR, X DS, Max X DS
• (2015-2017) Can-Am® Maverick Turbo
  • X DS Turbo, X RS Turbo, Max Turbo, Max X DS Turbo, Max X RS

Fuel Off-Road has been capturing the attention of off-road enthusiasts with our cutting edge designs, fitments, and technological advancements. Fuel Off-Road manufactures the most advanced off-road wheels, offering the latest in design and engineering innovations on the market.

Fuel Off-Road has been capturing the attention of off-road enthusiasts with our cutting edge designs, fitments, and technological advancements. Fuel Off-Road manufactures the most advanced off-road wheels, offering the latest in design and engineering innovations on the market.

Fuel Off-Road has been capturing the attention of off-road enthusiasts with our cutting edge designs, fitments, and technological advancements. Fuel Off-Road manufactures the most advanced off-road wheels, offering the latest in design and engineering innovations on the market.