Side by Side Outlet Parts and Accessories
When you operate your UTV over 40 MPH you are […]
When you operate your UTV over 40 MPH you are […]
When you operate your UTV over 40 MPH you are […]
The Control Manifold is the operations center of any Jacking […]
RZR 4 PRO REAR BENCH SEAT W3 / 4 POINT HARNESS
- ONE REAR BENCH SEAT MADE OF ALL VINYL
- COMES ALL BLACK
- 3 UTVMA 4 POINT HARNESS WITH SEWN IN HARNESS PAD AND CHEST BUCKLE
- ALL MOUNTING HARDWARE
PRICE INCLUDES SHIPPING! Locals can save an additional $50 by picking up from the retail store location, although this is dependent on some payment methods.
Change your General 4 1000 into a 5 Seater
Package includes:
- One Rear Bench seat made of all vinyl Comes in 4 Colors ( Please Choose one color below) - 3 UTVMA 4 Point Harness with sewn in harness pad and chest buckle - All Mounting hardware (this seat includes a 3 piece Console Delete Kit ) - Installation instructions
EXR FUEL TANK Instructions.pdf
TRANSMISSION SEAL KIT If your machine is leaking oil from […]
We use this in the shop every day! Sturdy enough for the biggest of UTVs and yet small enough for the ATVs we service as well. We have lifted a Can Am X3 MAxx with 33" tires and it did the job better that any jack we have used. This thing has wheels to easily move it around the shop or even outside! Comes in standard black paint and is unassembled. Custom powdercoated colors available for +$300. If you are a local wanting to pick up an assembled unit, we can do that too!
Upgrading the doors on the Can-Am Maverick X3 Max is one of the first mods most people do. This is to prevent debris from hitting you below the half doors that come from the factory. While there are many aluminum door products out there, Agency Power has designed the ultimate door upgrade available! The new Agency Power carbon fiber doors for the Can-Am Maverick X3 are available to fit the rear door of any X3 Max.
These rear doors are a full 1 piece carbon fiber construction designed to fit with the stock upper door metal frames. The doors also use the factory latch mechanism so you can easily open and close the door. The interior of the doors are a black gel coat finish. With the addition of a door bag or pad, the inside of the cockpit is extremely functional like stock. The doors are designed to be lightweight and sturdy to take abuse. The exterior of the doors are a 2x2 carbon fiber weave with a high gloss clear coat finish. Complete the great look by adding the Agency Power matching carbon fiber front doors.
For those wanting to avoid scratches or rock chips, Agency Power recommends having the doors covered in clear bra similar to a car’s front bumper. We also offer a ceramic coating finish that is optional. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber rear doors are a great upgrade to really make you stand out amongst other Can-Am X3 Max owners!
These are rear door sets ONLY. Front door sets are sold separately.
Features:
- Carbon Fiber Construction
- Full Door Protection
- 1 Piece Door Design
- Designed as an OEM Replacement
- 2x2 Carbon Weave
- High Gloss Clear Coat with Interior Black Gel Coat Finish
- Works with Factory Frame and Door Latch
- Lightweight Design
Options:
- Ceramic Coating Available to Keep Up Finish and Improve Durability
Fitment:
- 2017+ Can-Am X3 Max Turbo, X3 Max Turbo R, X3 Max X DS Turbo R, X3 Max X RS Turbo R
Notes:
- Does not include the door frames or hardware. This product is a replacement for the factory plastic and is designed to work with the factory door frames. Lower frames are not required but for the best support, we recommend using the factory Can-Am lower door frames or fabricating some to attach the door too.
We set out make the best knuckles available with the end user in mind. Through extensive testing and racer feedback we revolutionized the way bearing carriers are designed. With our Bearing Cartridge you no longer have to remove the bearing carrier to change wheel bearings. You also do not need special press tools to change your wheel bearings. Our bearing cartridge is threaded and can be threaded out and replaced with a new one to simplify wheel bearing changes. This is a HUGE improvement over traditional designs. There is no snap ring to fail nor press area on the carrier to lose tolerance. We also offer preloaded replacement cartridges so you can keep an extra set with you just in case you need to change a wheel bearing on the trail or on a riding trip. These also work great in racing applications where bearings need to be changed in a pit stop or between Motos in a timely manor.
Upgrading the doors on the Can-Am Maverick X3 is one of the first mods most people do. This is to prevent debris from hitting you below the half doors that come from the factory. While there are many aluminum door products out there, Agency Power has designed the ultimate door upgrade available! The new Agency Power carbon fiber doors for the Can-Am Maverick X3 are available to fit the 2 door and 4 door X3 Turbo, X3 X DS Turbo R, and the X3 X RS Turbo R. These doors are a full 1 piece carbon fiber construction designed to fit with the stock door metal frames. Even the factory door latch mechanism is retained. The interior of the doors are a black gel coat finish. With the addition of a door bag or pad, the inside of the cockpit is extremely functional like stock. The doors are designed to be lightweight and sturdy to take abuse. The exterior of the doors is a 2x2 carbon weave with a high gloss clear coat finish. For those wanting to avoid scratches or rock chips, Agency Power recommends having the doors covered in clear bra similar to a car’s front bumper or we offer Ceramic Coating optionally. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber doors are a great upgrade to really make you stand out amongst other Can-Am X3 owners!
Sold as FRONT doors only. Rear doors sold separately.
Features:
- Carbon fiber construction
- Full door protection
- Designed as an OEM replacement
- Works with factory frame and door latch
- Lightweight design
Options:
- Ceramic Coating Available to Keep Up Finish and Improve Durability
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 Door
- Will also fit the front of the Can-Am X3 Max
Note:
- Does not include the door frames or hardware. This product is a replacement for the factory plastic and is designed to work with the factory door frames. Lower door frames are recommended for added rigidity.
FUN FACTS on our GEN2 LED Whips and Rock Lights!
1- Comes with Bluetooth controller!2- Comes with Remote controller! (YES BOTH)3- Our light LED whips and Rock Lights Can SYNC up together or work independently of each other!4- LED whips as well as ROCK LIGHTS can connect to work with your Blinkers and Brakes!5- LED Whips and Rock Lights can SYNC to music6- Comes with ROKIT WARRANTY (lifetime manufacturer for defects, as well as 50% off a new replacement for whips with customer caused damage)PRICE INCLUDES SHIPPING! You saw it here first folks--Change your MAVERICK X3 MAX into a 5 Seater!!!!!
Package includes:
- One Rear Bench seat made of all black vinyl - 3 UTVMA 4 Point Harness with sewn in harness pad and chest buckle - All Mounting hardware - Installation instructions
The new RIGID Radiance Plus light bar is the perfect […]
The new RIGID Radiance Plus light bar is the perfect […]
The new RIGID Radiance Plus light bar is the perfect […]
It is all about stealth with RIGIDs Midnight Edition LED […]
Our 2nd Generation BULLETPROOF Front Differential rebuild package includes the […]
Our 2nd Generation BULLETPROOF Front Differential rebuild package includes the […]
Machined from heat-treated domestic materials, our Steel Sprague and Armature […]
Our exhausts are fully manufactured out of 304 stainless steel, and TIG welded giving you a corrosion proof product with long-term performance. Once used, the true living colors of the stainless steel, ranging from gold to blue, will appear for a stylish look.
The Force Turbos Can-Am Maverick X3 Turbo Back Exhaust is designed not only for great looks and sound, but to also utilize proven performance enhancing strategies. With the initial silencer acting as an expansion chamber that increase exhaust velocity when combined with the scavenging effect of the secondary exhaust.
Expect horsepower gains at or around 7 RWHP and 12 ft-lbs of torque.
Force Turbos’ exhausts are constructed as a direct slip-on replacement, allowing for easy installation with a solid connection.
The MTX MAVERICKBOAKIT1 audio system includes Bluetooth overhead audio system and custom fit powered subwoofer enclosure designed to deliver unbeatable high quality audio to Can-Am Maverick side-by-sides. This all weather system includes four 6.5" coaxial speakers that work in conjunction with an integrated power amplifier and a single 10" subwoofer in an all-weather amplified enclosure.
Fit Guide
MODEL 2012 2013 2014 2015 2016 2017 Maverick 2-Door Yes Yes Yes Yes Yes Maverick 4-Door Yes Yes Yes Yes Yes Maverick X3 NA NA NA NA No No Commander 2-Door Yes Yes Yes Yes Yes Commander 4-Door Yes Yes Yes Yes Yes Commander MAX Limited (will not fit with factory kick panel speaker option) Yes Yes Yes The MTX RZRBOAKIT1 audio system includes Bluetooth overhead audio system and custom fit powered subwoofer enclosure designed to deliver unbeatable high quality audio to UTV's that include mounting accessible roll cages with diameters between 1.75" and 2" like Polaris RZRs. This all weather system includes four 6.5" coaxial speakers that work in conjunction with an integrated power amplifier and a single 10" subwoofer in an all-weather amplified enclosure.
Introducting The Weld It Yourself RADIUS Cage Kit For Your 2019+ Polaris XP1000 2 Seater! This Cage Is Built With .095" DOM Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connectors To The Stock Cage Locations And Piece Together The Cage On The Vehicle. Please Note The Year Range Selection, As The 2014-18 Cages Have A Lower Dash Bar Than Their 2019+ Counterpart (primarily Due To The New Raised Dash Design With Polaris Ride Command®)
- • Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts in Stock Bed• Maintains Excellent Viewing Area Out The Back of Car• High Output FansKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Caps, and all other Hardware for installation.Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit
Made to order: 1 week build time
- • Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts to Stock Rollcage Mounting Points• Maintains Excellent Viewing Area Out The Back of Car• High Output FanKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Overflow Bottle, Caps, and all other Hardware for installation.Options: Fan Override Kit with Switch +$100
Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit
Made to order: Estimated 1 week build time
- • Prevents Overheating• Great for all types of Riding or Racing• Mounts to Stock Rollcage with brackets and clamps• Allows for an open bed for coolers, spares and Toolbox• High Output FansKit Includes: CBR Radiator, Hoses, Clamps, Fan Wire, Caps, and all other Hardware for installation. The only thing you will need is antifreeze. We recommend 50/50 ready to use.
Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch
Made to order: 1 week build time
Made to order: 1 week build time
Please be sure to specify any special wiring or build needs in checkout notes. (ex. Turbo on a non turbo car, want to keep stock radiator up front as rear, etc...)
• Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts to Stock Rollcage Mounting Points• Maintains Excellent Viewing Area Out The Back of Car• High Output FansKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Caps, and all other Hardware for installation.Options: Fan Override Kit with Switch +$100Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch KitOEM 2884332 Polaris Upper Doors for 2019+ RZR 4 Seat (not Turbo S)
- Includes one (1) set Canvas Upper Doors
- Built from high-quality, durable polyester for UV protection and mildew resistance
- Rugged vinyl window with UV and cold crack resistance
.
Each Kit Features:
- Direct OE replacement
- Significantly stronger than stock
- High-grade steel construction
- Boxed sheet metal design
- Heavy duty pivot bushings
- Retains OE ball joints
- Durable semi-gloss black powder coat
- Made in the USA
With it’s 9 gallon capacity, this AGM EXR Fuel Tank […]
With it’s 9 gallon capacity, this AGM EXR Fuel Tank […]