Side by Side Outlet Parts and Accessories
LiteSPOTs LED spotlights were designed to be a low profile under chassis light, a rock light.
LiteSPOTs are 3 high power LEDs embedded in a clear resin housing to deliver a water and corrosion proof package that delivers a wide beam of bright light, with a 4-6 foot focal range. They are not designed as backup or driving lamps. The LiteSPOTs include a neodymium magnet encased in the resin, providing for easy “stick on” mounting to any metallic surface. There is also a thru hole drilled in each one and a supplied self tapping screw to allow for installation on non-ferrous surfaces.
Each LiteSPOT measures 1 3/8″ in diameter and 5/8″ thick. Each LiteSPOT comes with 24″ of 2 conductor 22 gauge wire attached and each unit draws approximately 120 milliamps.
This Slip-On Muffler for the Polaris XP 900 RZR delivers an additional 4.2 horsepower with well over double the air flow compared to the stock silencer. This translates into a substantial performance increase and better throttle response. Its stainless steel construction provides excellent strength and durability. The sound level measures 95.5 DB (@ 4200 RPM) using the SAE J1287 sound test. It also features a spark arrestor that can be added for trail use.
Fuel controller not required.
This is the same muffler found on the 2013 Polaris Jagged X.
CLEARANCE! While supplies last!
Fits any RZR 570/800/900XP (not trail).
Looking for graphics to complete the look on your 2020 RZR® Pro XP and color ways for your Pro Armor® RZR® Pro XP Doors and side panels. Look no further to a color and theme matched white/blue graphics kit. Consists of a white/blue color scheme this graphic kit will match the colors on your white/blue RZR® Pro XP. Made from 3M brand vinyl and backing for a strong application and withstand elements and fade.
This Graphic Kit only fits Pro Armor "Pro XP" doors 2020 model vehicle found by clicking HERE.
Pro Armor All Aluminum doors are an industry standard. These doors are direct bolt on to your Pro XP and install in minutes. The bolt on door utilizes the OEM Paddle latch and there is absolutely no rattle with these doors. Installation is easy and the doors allow for plenty of adjustment. Our doors feature a reverse hinge system which makes getting in and out of your Pro XP much easier. The doors open almost a full 180. Doors offered in all 2020 Pro XP Polaris signature colors.
Matching graphics kit as pictured available, click HERE.
Features:
- Weather-resistant semi-rigid bag, holds your gear safely and securely while riding.
- Bag attaches in unused space between the seats to increase your vehicle's cargo capacity.
- 2.8 Gal (10.5L) capacity.
- Not compatible with Aftermarket Seats
Fitment:
- 2018+ Maverick Trail, Maverick Sport, Maverick Sport Max
- 2021+ Commander all models
These are made from 1/4 Laminated Safety Glass and a steel frame. The bottom portion will flip up and forward in the middle to allow airflow underneath. Fits any maverick trail or sport model.
INTRODUCING THE GUN DEFENDER
- Injection molded design offers superior strength as well as high water and dust resistance
- Defender design accommodates standard length and longer rifle barrels
- Additional width in the right places eliminates interference with bolts and target style turrets
- Fully customizable hybrid interior structure ensures a secure hold and protection for any gun
- Accommodates rifles up to 53" in length
- Accommodates turret style scopes up to 50mm
- 1.25” receiver slider makes for easy on, and easy off of the machine
- ATV Mount sold HERE
- UTV Bed Mount sold HERE
- Hitch Mount sold HERE
Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl.
Fits in any RZR 2014+ (900s, 1000s, Turbos). Made for two Yeti cups but works with many large+ plastic cups from most gas stations. If needed, you can buy the can inserts as well.
Flex Fit Hat that shows your support for Side by Side Outlet. Ride in style! Order now, limited to what's on hand!
New colors for 2020! These are limited to what we have on hand!
- Record Tracks
- GPX file import and export
- Drop customized waypoints and set waypoints as destination.
- Glove friendly 4" touch-screen
- Pre-loaded topo maps with layers
- Color Display
- Plan & record entire trail systems
- Tachometer
- Bluetooth phone and headset interaction
- Lap Timer
- Track up to 20 buddies (Cellular service not required)
- Emergency beacon
- GPS satellites tracker
Details
- The Tusk UTV Seat Heater is the ideal accessory to add to your machine when riding in cold weather conditions. The seat heater panel fits under your seat cover and connects to your battery for easy installation. This heater includes a switch with High and Low heat settings to make it easy to set your comfort level. It would be a great addition to your cold weather rides and plowing snow with your UTV. Works on most UTV applications. When in need of parts and accessories for your dirt bike, ATV, or UTV, think TUSK!
- Tusk UTV Seat Heater is perfect for cold weather riding conditions.
- Switch includes High and Low heat settings for the ideal comfort level.
- Easily installs under the seat cover and connects to the battery of the machine.
- Works great for most UTV applications.
- 50 Watts
- Max Temp of 158 F (70C).
- Some drilling is required to install the switch.
- Sold Per Seat.
- Dimensions: 10.75"x18.5
Use this handy wire tap to get power from your brake lights! Will give you a keyed power, ground, and then a brake light power. Us it to run whips, a third brake light, license plate light, or anything else you can think of. Simply tape off or cut the wire you don't need from this handy harness. Check picture carefully for pin configuration, some models MAY vary. Fits most Poalris RZR and Ranger Models 14+, may fit others.
- Hess Motorsports Rear Mounted Radiator Kit• Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts to Stock Rollcage Mounting Points• Maintains Excellent viewing are through rear of car• High Output Fan• Dual Pass Turbo IntercoolerKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Overflow Bottle, Caps, and all other Hardware for installation.
Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit
Made to order: Estimated 1 week build time
- • Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts in Stock Bed• Maintains Excellent Viewing Area Out The Back of Car• High Output FansKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Caps, and all other Hardware for installation.Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit
Made to order: 1 week build time
- • Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts to Stock Rollcage Mounting Points• Maintains Excellent Viewing Area Out The Back of Car• High Output FanKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Overflow Bottle, Caps, and all other Hardware for installation.Options: Fan Override Kit with Switch +$100
Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit
Made to order: Estimated 1 week build time
- • Prevents Overheating• Great for all types of Riding or Racing• Mounts to Stock Rollcage with brackets and clamps• Allows for an open bed for coolers, spares and Toolbox• High Output FansKit Includes: CBR Radiator, Hoses, Clamps, Fan Wire, Caps, and all other Hardware for installation. The only thing you will need is antifreeze. We recommend 50/50 ready to use.
Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch
Made to order: 1 week build time
Made to order: 1 week build time
Please be sure to specify any special wiring or build needs in checkout notes. (ex. Turbo on a non turbo car, want to keep stock radiator up front as rear, etc...)
• Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts to Stock Rollcage Mounting Points• Maintains Excellent Viewing Area Out The Back of Car• High Output FansKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Caps, and all other Hardware for installation.Options: Fan Override Kit with Switch +$100Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch KitMade to order: Estimated 1 week build time
Please be sure to specify any special wiring or build needs in checkout notes.
(ex. 2 seater, 4 seater, turbo, non turbo)
• Prevents Overheating• Great for all types of Riding or Racing• Works with all types of Stock and Aftermarket Rollcages• Mounts to Rear Bed Area• Maintains Excellent viewing are through rear of car• 3 High Output Fans• Dual Pass Thick CoreKit Includes: CBR Radiator, Mounting Brackets, Hoses, Clamps, Fan Wire, Overflow Bottle, Caps, and all other Hardware for installation.Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
Note: This Kit Only Works with the 2016 Turbo. You cannot override the 2017- Up Turbo cars
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
Fits any single or double row 30" light bar on all RZR model 900/1000/Turbo that are 2015+ (not Turbo S).
- Eliminates Steering Play
- Eliminates Bump Steer
- 7075 Billet Aluminum
- Includes Delrin Wear Plate
- Hard Anodized for Maximum Durability
- Made in USA
- Hardware Included
- We Highly Recommend Installing this with a new OEM rack!!!.
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
- OEM connectors
- Easy Installation
- Backlit Switch
- No Splicing Needed
Fits all 2010-2015 Polaris Ranger 800 models
Left & Right Rock Slider and Floorboard Skid Plate Set Constructed with 5052-H32 Aluminum
Please contact us directly for color options - Anodizing Available w/2-3 week lead time.