Side by Side Outlet Parts and Accessories
This new cap is very robust in its construction to significantly reduce the binding caused by the stock cap in RZR Turbo and RS1 models. This decreases heat and friction, improves clutching consistency and performance and lengthens clutch and belt life. One key to our design is the tight tolerance bronze bushing that we use. This bushing is flanged to insure that it stays in place and the tighter tolerance between the bushing and the spider nut helps further reduce heat and friction caused by cap bushing bind to eliminate the problem rather than just deal with the headaches the extra heat and friction create. This kit comes complete with a new spider nut that has been machined in the castle area to allow its use with the tight tolerance bushing.
- 3/16” Thick Hard Coated Polycarbonate (both sides).
- Attaches with our Rubber Fast Straps.
- Tool-less removal.
- Rubber edge trim protects and seals along the hood.
- Add an optional hand wiper from the drop down menu.
- Slide vent allows airflow on warm days.
- DOT Rated and stamped with EMP® logo (you should check your local regulations if making it street legal).
- Made and/or assembled In Cleveland Ohio.
Easy Install Black 6″ License Plate Frame with full spectrum 6 white LEDs Hardware Included Made in the USA!
Plug & Play Easy Install Fits 2017-2019 Yamaha Wolverine Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch*** Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2015-2018 Polaris RZR XP 1000/Turbo Models Fits 2016-Up Polaris RZR 900 with LED Tail lights Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2019 Polaris Ranger with Factory Installed Ride Command (for non Ride Command, click HERE)
Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Plug & Play Easy Install Fits 2016-2018 Polaris General 1000 Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Light Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Fitment:
- 2017-2018 Can-Am Maverick X3, every model
- 2013-2018 Can-Am Maverick, every model
- 2011-2018 Can-Am Commander, every model
- 2008-2018 Can-Am Renegade, every model
- 2006-2018 Can-Am Outlander, every model
- All Years - Can-Am Defender, every model
- 2018 Can-Am Traxter, every model
- ALL Can-Am UTV's and ATV's from 2007 to 2020 (not 2018's with Smart Lok, or 2020+ European Models with Brake Traction Control, "BTC")
Features:- Direct replacement for the OEM Polaris plastic valve
- Tested to 500+ horsepower
- Billet anodized aluminum construction with high temperature sealing rings
- Does not stick like the OEM valve is prone to
- Has the “Blow Off Valve” sound that turbo customers crave
- Includes a pre filter to keep dirt/sand out of the valve
Please note: Bimini Roof with sun visor or Sport Roof needed for installation (sold separately)
- Weather-resistant bags
- Hold your gear safely and securely while riding
- Includes 2 overhead soft bags mounted on a tubular frame that sits between cage and roof
- 2.4 Gal (9L) total capacity
- Sold as pair
LiteSPOTs LED spotlights were designed to be a low profile under chassis light, a rock light.
LiteSPOTs are 3 high power LEDs embedded in a clear resin housing to deliver a water and corrosion proof package that delivers a wide beam of bright light, with a 4-6 foot focal range. They are not designed as backup or driving lamps. The LiteSPOTs include a neodymium magnet encased in the resin, providing for easy “stick on” mounting to any metallic surface. There is also a thru hole drilled in each one and a supplied self tapping screw to allow for installation on non-ferrous surfaces.
Each LiteSPOT measures 1 3/8″ in diameter and 5/8″ thick. Each LiteSPOT comes with 24″ of 2 conductor 22 gauge wire attached and each unit draws approximately 120 milliamps.
This Slip-On Muffler for the Polaris XP 900 RZR delivers an additional 4.2 horsepower with well over double the air flow compared to the stock silencer. This translates into a substantial performance increase and better throttle response. Its stainless steel construction provides excellent strength and durability. The sound level measures 95.5 DB (@ 4200 RPM) using the SAE J1287 sound test. It also features a spark arrestor that can be added for trail use.
Fuel controller not required.
This is the same muffler found on the 2013 Polaris Jagged X.
