Side by Side Outlet Parts and Accessories
The Agency Power Premium Grill is a stylish addition to your Polaris RZR Turbo or 1000. The replacement grill is constructed from an inner and outer assembly that has been precision cut out of stainless steel. The outer grill is powder coated in a textured black and features the Agency Power AP logo in the bottom center. The inner grill has been designed to be slightly offset of the outer grill to show off the brilliant color and make the AP logo pop. These are also powder coated for a durable finish in several colors. These 2 pieces are held together with rivets which give it that industrial look. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- Orange Accents
- Precision cut stainless steel
- Two tone high quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 | XP4 1000 2014-2018
- Polaris RZR XP Turbo | XP4 Turbo 2016
The Agency Power Premium Grill is a stylish addition to your Polaris RZR Turbo or 1000. The replacement grill is constructed from an inner and outer assembly that has been precision cut out of stainless steel. The outer grill is powder coated in a textured black and features the Agency Power AP logo in the bottom center. The inner grill has been designed to be slightly offset of the outer grill to show off the brilliant color and make the AP logo pop. These are also powder coated for a durable finish in several colors. These 2 pieces are held together with rivets which give it that industrial look. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- Blue Accents
- Precision cut stainless steel
- Two tone high quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 | XP4 1000 2014-2018
- Polaris RZR XP Turbo | XP4 Turbo 2016
The Agency Power Premium Grill is a stylish addition to your Polaris RZR Turbo or 1000. The replacement grill is constructed from an inner and outer assembly that has been precision cut out of stainless steel. The outer grill is powder coated in a textured black and features the Agency Power AP logo in the bottom center. The inner grill has been designed to be slightly offset of the outer grill to show off the brilliant color and make the AP logo pop. These are also powder coated for a durable finish in several colors. These 2 pieces are held together with rivets which give it that industrial look. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- Gloss Black Accents
- Precision cut stainless steel
- Two tone high quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 | XP4 1000 2014-2018
- Polaris RZR XP Turbo | XP4 Turbo 2016
The Agency Power Standard Grill is a simple addition to your Polaris RZR Turbo or 1000 to make the front end stand out. The replacement grill is constructed from stainless steel that has been precision water jetted. The stylish honey comb look is a perfect replacement for the plastic factory grill. The 1 piece grill is powder coated in a variety of colors and features the Agency Power AP logo in the bottom center. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- Precision cut stainless steel
- High quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 | XP4 1000 2014-2017
- Polaris RZR XP Turbo | XP4 Turbo 2016
The Agency Power Standard Grill is a simple addition to your Polaris RZR Turbo or 1000 to make the front end stand out. The replacement grill is constructed from stainless steel that has been precision water jetted. The stylish honey comb look is a perfect replacement for the plastic factory grill. The 1 piece grill is powder coated in a variety of colors and features the Agency Power AP logo in the bottom center. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- Orange Accents
- Precision cut stainless steel
- High quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 | XP4 1000 2014-2017
- Polaris RZR XP Turbo | XP4 Turbo 2016
The Agency Power Standard Grill is a simple addition to your Polaris RZR Turbo or 1000 to make the front end stand out. The replacement grill is constructed from stainless steel that has been precision water jetted. The stylish honey comb look is a perfect replacement for the plastic factory grill. The 1 piece grill is powder coated in a variety of colors and features the Agency Power AP logo in the bottom center. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- Gloss Black Accents
- Precision cut stainless steel
- High quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 2014-2017 | XP4 1000 2014-2016
- Polaris RZR XP Turbo 2014-2017 | XP4 Turbo 2016-2016
The Agency Power Standard Grill is a simple addition to your Polaris RZR Turbo or 1000 to make the front end stand out. The replacement grill is constructed from stainless steel that has been precision water jetted. The stylish honey comb look is a perfect replacement for the plastic factory grill. The 1 piece grill is powder coated in a variety of colors and features the Agency Power AP logo in the bottom center. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- Blue Accents
- Precision cut stainless steel
- High quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 | XP4 1000 2014-2017
- Polaris RZR XP Turbo | XP4 Turbo 2016
The rear of the Polaris RZR 1000 | RS1 or Turbo is usually visually enhanced by an exhaust system. Some exhausts give you great performance but not a great look. The new Agency Power carbon fiber exhaust shield is a great way to give the back of your Polaris RZR some real style. The full carbon fiber shield is designed as a complete replacement for the factory black plastic unit. It will fit with most aftermarket exhaust systems that use the stock mounting brackets and can fit the stock cover. Because the carbon fiber shield is designed after the factory unit, it will also fit with most OEM style rear bumper bars and cages. The carbon fiber shield is also designed to hold up to the intense heat that the exhaust omits. Working with the stock metal shield, the carbon fiber keeps looking brilliant even after hammering your car around the track or trails. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber scoop is a standard 2x2 weave that has been finished in a high gloss clear coat. The carbon fiber exhaust shield is a great aesthetic part to truly set you apart from other Polaris RZR owners!
Features:
- Carbon fiber construction
- Designed as an OEM replacement
- Lightweight design
Fitment:
- 2014-2018 Polaris RZR XP | XP4 1000 | RS1 or Turbo
The dash on the Polaris RZR 1000 or Turbo is rather bland for the UTV owner who is into highly customizing their vehicle. One way to enhance the look of the dash is with the new Agency Power carbon fiber complete dashboard. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber dash for the RZR 1000 or Turbo is designed as an OEM replacement. It reuses the factory circular gauge cluster and stock switch spots. The carbon fiber dash is a standard 2x2 weave that has been finished in a high gloss clear coat. The carbon fiber dash is extremely lightweight and is the perfect addition to your Polaris RZR.
Features:
- Carbon fiber construction
- Designed as an OEM replacement
- Lightweight design
Fitment:
- 2014-2018 Polaris RZR| 900 Trail/Sport | 1000 XP | XP4 1000 or Turbo with round cluster
The Polaris RZR is a purpose-built machine to dominate off-road trails, dunes, and any other terrain you can think of. While there are a few comfort features, there is typically not much storage offered. This leaves it up to the driver and passenger to strap down and contain their belongings which can become a hassle when there are quite a few items. Agency Power has solved this never-ending issue with door-mounted storage bags.
Easily attaching to the inside door skin, the Agency Power storage bag velcro's to the factory door frames offering exceptional storage to keep your possessions safe. Loosely having your phone, wallet, and keys strewn throughout the machine can be dangerous and uncomfortable. In the event of a rollover, your items can be thrown from the vehicle making it harder to alert others of the situation, call for help, or have people identify you.
The Agency Power storage bag is constructed of a 1680 denier nylon fabric that features a durable waterresistant coating. To clean the bag, simply wipe it off with a wet rag to collect the dust, then dry it off with a clean rag. This storage bag can be used to secure your keys, wallet, phone, water, snacks for the ride, and other miscellaneous belongings that can't fit in the glove box.
The door-mounted utility bags are the perfect solution for those of you looking to organize and contain your personal belongings. The durable construction will last you a lifetime and heavy-duty zippers will keep your items put without the worry of cheap zippers falling apart after a year of use.
Features:
- Store personal belongings such as keys, wallet, phone, water, snacks, and many other items
- Constructed of a 1680 denier nylon fabric
- Water resistant material makes upkeep a breeze
- Easily attaches to the door frame with ultra-strong velcro fixed on the backside of each bag
- Heavy-duty zippers add styling and longevity
- Limited One-Year Warranty
Fitment:
- Polaris RZR 900 | XP 1000 | XP4 1000 2017-2020
Getting your Polaris RZR suspension dialed in to handle the track, the dunes, or the bumps is a unique art that requires the right kind of products. Agency Power has been engineering and manufacturing suspension components since 2004 for a wide variety of vehicles. These rear adjustable sway bar links for the Polaris RZR 1000 and Turbo are a perfect addition to improve your vehicles handling. Manufactured from 6061 aluminum, each piece is CNC machined to feature an adjustable flat for on the fly changes. They are powder coated in a variety of colors and finished off with an AP logo that has been laser etched. The end links feature super durable QA1 spherical rod ends. These are a 3 piece design with Teflon lining to take the abuse that comes with off-road driving. Each spherical rod end includes CNC machined, steel spacers to allow for a secure and precision fit to the factory sway bar and trailing arm. Securing the rod ends from coming loose is a stainless steel jam nut. These sway bar links are sold as a pair as required for the rear of your vehicle. These are a great match for our Agency Power Polaris RZR Control Arms and other Polaris products!
Features:
- 6061 Aluminum Adjuster Rod
- Machined Steel Spacers
- QA1 Heavy Duty Rod Ends
- Powder Coated Popular Colors
Fitment:
- Polaris RZR XP 1000 | XP4 1000
- Polaris RZR XP Turbo | XP4 Turbo
Notes:
- Colors are powder coated, not paint matched to factory color codes.
In the world of rear control arms for the Polaris RZR, there are beefier radius rods and high clearance arms. However, for those wanting the beefiest, strongest, most extreme rear control arm, there is the Agency Power Unbreakable High Clearance Rear Arms for the RZR 1000 | RS1 and RZR Turbo. Designed for racing, rock smashing, and all around terrorizing of trails, the Agency Power rear arms are something you will never think twice about. Built from 3/16 inch thick, 1018 steel, each arm is a 2 piece plate design that is stitched together. On one end is a CNC machined cup to fit a fixed monoball bearing and on the other end is a CNC machine insert to fit the 5/8 inch spherical rod end. All parts are MIG welded together for one ultra-strong piece. To ensure proper alignment with the factory hardware, 304 stainless steel spacers are CNC machined and included with the kit. Each kit also includes an upgraded 3/16 inch rear frame brace that features the AP logo.
With a fixed monoball design on the inner part of the bars, these will not rotate around like other kits that have adjustable rod ends. When using adjustable rod ends on high clearance arms, they tend to rotate loosening the heim. The fixed bearing gives a rigid connection that will never come loose or rotate. With the adjustable spherical rod ends on the outside of the bars, you can set your suspension to dial in your camber and toe. The QA1, 3 piece Teflon lined spherical rods ends are great for your off-road needs. With a name like QA1 that is synonymous with off-road racing, you can count on their quality and longevity. Each high clearance arm kit is powder coated in popular colors to go with your Polaris RZR theme. Based on your year selection, these can be used with the 2014-2016 or 2017+ Polaris RZR models.
Features:
- Heavy duty 1018 steel constructions
- Inside fixed bearing to prevent rotation
- Powder coated in popular colors
- High quality QA1 spherical rod ends
- Thick rear support brace
Notes:
- Colors are powder coated, not paint matched to factory color codes.
- View our installation article here
Fitment:
- 2014-2016 Polaris RZR XP 1000 | RS1
- 2014-2016 Polaris RZR XP4 1000 | RS1
- 2016 Polaris RZR XP Turbo | RS1
- 2016 Polaris RZR XP4 Turbo
- 2017+ Polaris RZR XP 1000 | RS1
- 2017+ Polaris RZR XP4 1000 | RS1
- 2017+ Polaris RZR XP Turbo | RS1
- 2017+ Polaris RZR XP4 Turbo
- 2018 Polaris RS1
Being able to dial in your Polaris RZR camber and toe settings will be a huge help in how your vehicle handles. Even more important is to have a strong enough component that can handle the abuse the RZR takes when flying through sand whoops or jumping at the course. The factory rear control arms that come on the 2014 — 2016 Polaris RZR are very thin and feature a 10mm through bolt to the rear frame. These can easily bend from small rock hits on the trail or hard landings in the dunes. The 2017 was beefed up a little and has larger 12mm through bolts. However neither of these offer adjustability.
The new Agency Power rear radius arms are a fully adjustable solution designed to take a beating. They are machined from solid 6061 aluminum on our CNC lathes here in Arizona, USA. The ends of the control arms are tapped to accommodate the QA1, 3 piece Teflon lined spherical rods ends. With a name like QA1 that is synonymous with off-road racing, you can count on their quality and longevity. The ¾ inch spherical rod ends have opposing threads and are locked in place with a stainless steel jam nut. Each rod ends through hole is 5/8 inch diameter with steel spacers machined to spec for a secure fit to the rear frame brace or wheel carrier. Each upper and lower radius rod features a machined flat so you can easily adjust on the fly using a proper tools.
The radius arm kit includes a new 3/16 inch thick rear frame brace that has been precision water jetted out of 1018 steel which will not flex or bend under the hardest conditions. The brace features the Agency Power logo and will retain the factory tow hook function. Each radius rod kit is powder coated in popular colors to go with your Polaris RZR theme. Based on your year selection, these can be used with the 2014-2016 or 2017 Polaris RZR models.
Features:
- 6061 Solid Aluminum with Easy Adjustment
- Powder Coated Popular Colors
- High Quality QA1 Spherical Rod Ends
- Thick Rear Support Brace
Installation Guide:
Fitment:
- 2014-2016 Polaris RZR XP 1000 | RS1
- 2014-2016 Polaris RZR XP4 1000 | RS1
- 2016 Polaris RZR XP Turbo | RS1
- 2016 Polaris RZR XP4 Turbo
- 2017 Polaris RZR XP 1000 | RS1
- 2017 Polaris RZR XP4 1000 | RS1
- 2017 Polaris RZR XP Turbo | RS1
- 2017 Polaris RZR XP4 Turbo
- 2018 Polaris RS1
Notes:
- These are a great match for our adjustable sway bar links too!
- Colors are powder coated, not paint matched to factory color codes.
- 2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars, 10mm or 12mm bolts. To determine what size of hardware you have, you figure out which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware, you will use a 15mm socket and for 12mm hardware, you will use a 18mm socket.
Upgrading the motor mounts on your Polaris RZR Turbo and Polaris RZR 1000 is a great way to improve performance and power delivery. The stock motor mounts are a cast piece which has a rubber insert that can move a lot under acceleration and braking. With this movement of the engine under load, you are delaying the power transfer and causing biased weight distribution. The harsh off-road conditions of aggressive driving and jumping can lead to further failures or damage to components. It is also common for rubber bushings to corrode and crack over time. Upgraded motor mounts are designed to limit the amount of movement that the engine and transmission produce in driving conditions. In addition to being a great upgrade over stock, the motor mount kit will give you a stout and responsive feeling under all driving conditions.
The Agency Power 2 piece motor mount kit is made in the USA from billet 6061 aluminum. The parts are CNC machined to feature a sleek design with an OEM fitment. Each mount features a polyurethane bushing with a Shore Durometer of 88 to provide a perfect balance for weekend fun and competition needs. The mounts included machined aluminum spacers to fit with the factory motor mount tube. Each mount has two locating dowel pins for a precision fitment. The mounts have been anodized in our Agency Power smoke gray finish and feature a laser engraved Agency Power text logo on top.
Features:
- 6061 CNC Machined Aluminum
- 88 Shore Durometer, Polyurethane Bushing
- Anodized Smoke Gray Finish
- Reduce Engine Movement
Notes:
- 2 Piece Motor Mount Kit ONLY
- View our installation article here
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2015-2018 Polaris RZR S 1000
- 2014-2018 Polaris RZR XP 1000
- 2014-2018 Polaris RZR XP4 1000
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Matte Black
- Mesh: White
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Matte Black
- Mesh: Red
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Matte Black
- Mesh: Raw
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Matte Black
- Mesh: Orange
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Matte Black
- Mesh: Matte Black
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Matte Black
- Mesh: Gloss Black
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Matte Black
- Mesh: Blue
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Gloss Black
- Mesh: White
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Gloss Black
- Mesh: Red
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Gloss Black
- Mesh: Raw
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Gloss Black
- Mesh: Orange
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Gloss Black
- Mesh: Matte Black
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Gloss Black
- Mesh: Gloss Black
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It’s no secret the RZR engine is known to get […]
Features:
- Lightweight Roto Molded XLPE Plastic Constructed Tubes
- Dual Black Intake Tubes
- Unique Filter Mounting
- High Flow and Re-Usable Air Filters
- Gains of 8-11 Horsepower
- Cross Bar Available in Matte Black, Gloss White and Gloss Red
- Bolt On
- Easy Installation
The Agency Power High Flow Air Intake System for the Polaris RZR RS1 is a great upgrade to help improve air flow from the intake to the engine. Not only does the intake gain very respectable horsepower, it also improves the drivability through the entire RPM range. The air intake kit features a roto-molded plastic tube design that faces towards the rear of the vehicle. Each intake includes a Polaris mesh inspired cross brace and our high flow dry filters. The new intake tubes and filters replace the factory intake system that runs to the roof of the RS1. This new design aids in increased air flow while filtering out more particulates than stock. As tested on the dyno, Agency Power saw a peak gain of 8 horsepower from just the air intake and an 11 horsepower gain with our custom VR Tuned ECU Flash. The easy modification of adding the Agency Power Air Intake System will help your Polaris RZR RS1 breathe better for greater performance. This simple upgrade is a must have for those running aftermarket roll cages and need an air intake solution.
The Agency Power cold air intake has been engineered from the ground up to be a direct replacement for the factory Polaris RZR RS1 intake. Starting from 3D printed components and real world desert testing, each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. The custom high flow Agency Power air filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filters to be purchased separately.
The new Agency Power roto-molded tubes replace the factory intake pipe system. The dual roto-molded plastic tubes have been designed not only to enhance the performance of your RS1 but also an easy installation to replace the factory air intake system. Each tube has a smooth inside that helps eliminate any turbulent air flow. The intake tubes get added support from a cross brace that comes in matte black, gloss white or red. The intake tube is designed to be strong and durable as the factory tube allowing it to hold up to the harsh elements. The dual filters mount uniquely on the intake tubes to grab more air and add great styling.
Features:
- Lightweight Roto Molded XLPE Plastic Constructed Tubes
- Dual Black Intake Tubes
- Unique Filter Mounting
- High Flow and Re-Usable Air Filters
- Gains of 8-11 Horsepower
- Cross Bar Available in Matte Black, Gloss White and Gloss Red
- Bolt On
- Easy Installation
Fitment:
- 2018+ Polaris RZR RS1
Note:
- For maximum performance, order the VR Tuned ECU Flash as well.
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears
- Understanding cleaning and filter technology – Read Here
Features:
- Bolt-on no modifications required to fit
- Powdercoated red compressor cover with AP logo
- Made in North America
- Each turbocharger is serialized
- No Core required, keep or sell your OEM turbo
- More consistent torque curve
- Less dip in top end power band
- Stays in torque longer
- 60+ horsepower gain on pump gas with tuning and supporting mods
- 80+ horsepower gain on race gas with tuning and supporting mods
Features:
- 1065cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
- Maximum Differential Fuel Pressure - 10.0 Bar (145.0 psi)
- Fuel Compatibility - Compatible With All Known Fuels
- Electrical Connector - USCAR
- Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.
- Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.
- Improved internal flow path increases output by 5% without sacrificing low flow performance.
- Stronger magnetic circuit offers stable operation up to 10 bar.
- Replaceable inlet filter extends service life.
Upgrade your Can-Am X3 with 154hp to the 2018+ Can-Am X3 with 172hp using this new fan upgrade from Agency Power. The horsepower upgrade requires a 2018+ Can-Am X3 fuel pump, ECU tune, and this fan. If you are researching this part, you will see you can only buy the intercooler with the fan from the dealer. That is a $675+ part! The OEM manufacture of the fan is by SPAL of Italy. These were directly made for Can-Am to handle the increase in horsepower by using a more powerful electric motor and different fan blade design. This increases the CFM which helps keep the charge temperatures down and the power up! This is an absolutely MUST have for any 2017 Can-Am X3 owner. It can also be used as a direct OEM replacement of the stock one should anything happen to it. Agency Power has put the correct connector on the SPAL fan to make this a 100% plug and play design.
Includes:
- SPAL OEM Can-Am Fan
- Can-Am Plug and Play Connector
Fitment:
- 2017 Can-Am X3 Turbo RS DS
Note:
- Sold as the FAN only! No intercooler included
Upgrading the intake and exhaust camshafts on your Can-Am X3 Turbo is a easy way to add 10hp and 30ft/lbs of torque as dyno tested. The pair of camshafts are a direct drop-in for the 3 cylinder turbo engine. There are no separate parts required or tuning to take advantage of these gains. The profile of these camshafts were spec'd to provide the best performance necessary with most commonly tuned X3 vehicles. We recommend our ECU flash to take advantage of the most power your X3 has to offer. Our demonstration vehicle was a 2017 X3 RS converted to 2018 power specs which featured our 195HP tune with an Agency Power exhaust and cold air intake. With a baseline of 148hp and 149ft/lbs of torque, we installed the camshafts and then re-ran the vehicle. Without any other variables, the vehicle than made 160 rear wheel horsepower and 181 ft/lbs of torque. With 110F temperatures and 91 octane fuel this car still represents a very impressive 210bhp on our Mustang Dyno. The Mustang Dyno typically shows a 25-30% drivetrain loss with the CVT transmission. These camshafts are sold as a pair for the intake and exhaust cam replacement.
Notes:
Recommended Parts to Achieve Same PEAK Dyno Results
- ECU Tuning
- Agency Power Valvetronic Dump Pipe
- Agency Power Cold Air Intake
- Agency Power Blow Off Valve Kit
- Agency Power Wastegate
- Agency Power Intercooler
Fitment:
- 2017 Can-Am Maverick X3 Turbo DS RS 154HP
- 2018 Can-Am Maverick X3 Turbo 120HP
- 2018 Can-Am Maverick X3 Turbo DS RS RC 172HP
- 2019 Can-Am Maverick X3 Turbo DS RS RC 172HP
- Fits both 2 Seater and 4 Seater Models
The Can-Am Maverick X3 can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the Can-Am X3 even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Can-Am X3 or other uses.
The Agency Power Can-Am X3 Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- View Install Instructions Here
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and has a 5/8 thru hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Gloss Red
- Made in the USA
Fitment:
- Can-Am Maverick X3 900 2018
- Can-Am Maverick X3 Turbo 2017+
- Can-Am Maverick X3 Turbo R 2017-2019
- Can-Am Maverick X3 X DS Turbo R 2017+
- Can-Am Maverick X3 X DS Turbo RR 2020+
- Can-Am Maverick X3 X RC Turbo 2018+
- Can-Am Maverick X3 X RC Turbo R 2018+
- Can-Am Maverick X3 X RC Turbo RR 2020+
- Can-Am Maverick X3 X RS Turbo R 2017+
- Can-Am Maverick X3 X RS Turbo RR 2020+
- Can-Am Maverick X3 X MR Turbo 2018+
- Can-Am Maverick X3 X MR Turbo R 2018-2019
- Can-Am Maverick X3 X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX Turbo 2017+
- Can-Am Maverick X3 MAX Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo RR 2020+
- Can-Am Maverick X3 MAX X MR Turbo R 2019+
- Can-Am Maverick X3 MAX X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX X DS Turbo 2017-2019
- Can-Am Maverick X3 MAX X DS Turbo R 2020+
- Can-Am Maverick X3 MAX X DS Turbo RR 2020+
The Can-Am Maverick X3 can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the Can-Am X3 even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Can-Am X3 or other uses.
The Agency Power Can-Am X3 Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- View Install Instructions Here
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and has a 5/8 thru hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Satin Black
- Made in the USA
Fitment:
- Can-Am Maverick X3 900 2018
- Can-Am Maverick X3 Turbo 2017+
- Can-Am Maverick X3 Turbo R 2017-2019
- Can-Am Maverick X3 X DS Turbo R 2017+
- Can-Am Maverick X3 X DS Turbo RR 2020+
- Can-Am Maverick X3 X RC Turbo 2018+
- Can-Am Maverick X3 X RC Turbo R 2018+
- Can-Am Maverick X3 X RC Turbo RR 2020+
- Can-Am Maverick X3 X RS Turbo R 2017+
- Can-Am Maverick X3 X RS Turbo RR 2020+
- Can-Am Maverick X3 X MR Turbo 2018+
- Can-Am Maverick X3 X MR Turbo R 2018-2019
- Can-Am Maverick X3 X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX Turbo 2017+
- Can-Am Maverick X3 MAX Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo RR 2020+
- Can-Am Maverick X3 MAX X MR Turbo R 2019+
- Can-Am Maverick X3 MAX X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX X DS Turbo 2017-2019
- Can-Am Maverick X3 MAX X DS Turbo R 2020+
- Can-Am Maverick X3 MAX X DS Turbo RR 2020+
