Side by Side Outlet Parts and Accessories
Replaces Polaris part numbers 2203738 22083739. Fits almost all Polaris Front Diffs.
Plug & Play Easy Install Fits ALL Honda Talon Includes two .75″ 3 LED front Amber Lights Plugs into OEM Brake Light Harness, using Factory Rear Lights* Laser Etched LED Lit Turn Switch Lit Emergency Hazard Switch Rear Power Out for optional license plate light** Made in the USA!
Use this handy wire tap to get power from your brake lights! Will give you a keyed power, ground, and then a brake light power. Us it to run whips, a third brake light, license plate light, or anything else you can think of. Simply tape off or cut the wire you don't need from this handy harness. Check picture carefully for pin configuration, some models MAY vary. Fits most Poalris RZR and Ranger Models 14+, may fit others.
- Eliminates Steering Play
- Eliminates Bump Steer
- 7075 Billet Aluminum
- Includes Delrin Wear Plate
- Hard Anodized for Maximum Durability
- Made in USA
- Hardware Included
- We Highly Recommend Installing this with a new OEM rack!!!.
Support the business, support Pancreatic Cancer research, and look great doing it! These are a Tultex brand on the Zip Ups and sizes run true. The Pull Overs are Gildan and sizes also run true. These are screen printed with metallic ink!
Simply the best sealant there is. You put this in BEFORE you have an issue. It works as a tire balancer and PERMANENT repair product. This is the ONLY sealant on the market that is a permanent fix, yet if the tire is dismounted later, you can simply wash it out as it never dries up!
MUCH better than Slime and others because these products leave goo inside the tire, and it's a real hassle for tire shop employees to get all of it off the wheel when they do a tire repair — especially if it's dried on. That could cost you when it's time to replace the tire; worse, the substance could even damage an otherwise repairable tire. If it freezes in the can, you'll have a heck of a time defrosting it — time you could be waiting for a tow truck instead. Even if you thaw the tire goo out, it could still refreeze inside your tire, knocking your wheel out of balance.
After months of testing the results are in! Our Turbo "S" CVT "Blaster" is good to go and as with our XPT CVT "Blaster" II you can achieve up to a 50 degree drop in direct belt temperature over stock and maintain better temperatures on those high speed runs.
Welded Carbon Steel
Powdercoated
No drilling, multi-angle adjustments.
Cage mount ONLY - does not come with a rotopax or fuelpax mount. See those HERE.
Replaces Polaris part numbers 3234755 (fill) and 3234756 (drain).
FUN FACTS on our GEN2 LED Whips and Rock Lights!
1- Comes with Bluetooth controller!2- Comes with Remote controller! (YES BOTH)3- Our light LED whips and Rock Lights Can SYNC up together or work independently of each other!4- LED whips as well as ROCK LIGHTS can connect to work with your Blinkers and Brakes!5- LED Whips and Rock Lights can SYNC to music6- Comes with ROKIT WARRANTY (lifetime manufacturer for defects, as well as 50% off a new replacement for whips with customer caused damage)
Features:
- Weather-resistant semi-rigid bag, holds your gear safely and securely while riding.
- Bag attaches in unused space between the seats to increase your vehicle's cargo capacity.
- 2.8 Gal (10.5L) capacity.
- Not compatible with Aftermarket Seats
Fitment:
- 2018+ Maverick Trail, Maverick Sport, Maverick Sport Max
- 2021+ Commander all models
Fitment
- 2017-2022 Can-Am Maverick X3 | X3 Max
Best BRP Belt on the Market!!!
- Made in the USA - Hunterworks belts are Made in the USA. These belts are engineered to meet or exceed OE standards.
- Long Service Life - Made from a proprietary construction application, these drop-in belts require no clutching adjustments and have a minimal stretch effect under load for consistent shifting
- 1% Warranty Rate - These belts can sport the title of having a less than 1% failure rate! That's because these belts are purpose-built to handle the unique demands of harsh CVT applications
- Huge Compatibility - Don't quote us, but BRP uses the same dimensioned belt on a ton of vehicles. It pretty much covers everything from a 800cc UTV to the Maverick X3. So what HW did was take BRP's OE dimensions, use their proven construction technique and make these belts.
- Common Sense 1 Year Warranty - We'll get down to what the warranty covers; As long as you didn't purposely try to blow your belt up, install it on the wrong UTV, install it incorrectly or have other clutch issues, we will replace the belt with a new belt. In the end these belts cost less money than the OEM belts and have a warranty trough Hunterworks where the OEM does not.
UTV Mountain Accessories Wolverine X2/X4 Bump Seat:
- Works with the wolverine X2 & X4
- Product created with extreme care and precision.
- Great for kids, about 60 lbs and under
- Added seating.
- Secure safety.
- Free shipping to anyone in the lower 48 US states.
- Product in stock and ready to ship within 1-2 business days.
- Free overnight shipping to anyone in Utah.
The AMSOIL ATV/UTV kits include the following:
- 2.5 quarts of AMSOIL 5W-50 Synthetic ATV/UTV Motor Oil (AUV50)
- 1 oil filter
Note: *Polaris owns the trademark rights of Polaris and the ATV/UTV models listed. No affiliation or endorsement claim, express or implied, is made by their use.
We use this in the shop every day! Sturdy enough for the biggest of UTVs and yet small enough for the ATVs we service as well. We have lifted a Can Am X3 MAxx with 33" tires and it did the job better that any jack we have used. This thing has wheels to easily move it around the shop or even outside! Comes in standard black paint and is unassembled. Custom powdercoated colors available for +$300. If you are a local wanting to pick up an assembled unit, we can do that too!
FITMENT
- Honda Talon 1000X : 2019+
- Honda Talon 1000R : 2019+
FEATURES
- Made of 4.5 mm heavy-duty steel plating
- Strengthens the weak spots on your Talon’s frame
- Saves your frame when you add heavy tires or other unsprung weight
- Adds support and stability
- Powder coated for durability
Ice Crusher MaxStat - Inline Coolant Bypass Thermostat for UTV Heaters
The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!
MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.
CNC Machined Aluminum.
Sizes available:
3/4'' (19mm) for 3/4'' ID Radiator Hoses
7/8" (23mm) for 7/8 ID Radiator Hoses
1'' (26mm) for 1" ID Radiator Hoses
1 1/4" for 1 1/4' ID Radiator Hoses
5/8 barbed heater hose output.
Ships with a Replaceable 180' Thermostat.
Price $99.99-But if purchased with one of our heater kits the price drops to $85.99, Saving $10 *
* $10 Savings is only available when the Heater and MaxStat are purchased and shipped together
Fits John Deere Gator 825i, 825m, and 855D (2011-2017)
Use your cooling system to heat your UTV's cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. What makes our heaters better, if not the best, is that you are dealing with the designer/manufacturer and most of the kits have been installed by us and fitment checked. We use modern automotive quality vents- not something that looks like it was made in the 50's. They match the modern styling of your UTV. Most of out kits use custom made solid CNC machined Y connection fittings, so there is no chance of leaking welds. We endeavor to use quality parts and hardware in all our kits.
Great for adding LED lighting to the bottom of the A pillar. Sold as a pair for left and right side. Brackets may not be EXACTLY as pictured, as they differ from model to model slightly.
Longer bolts or spaces MAY be require for the 570, 800, 900XP models
The AMSOIL ATV/UTV kits include the following:
- 3.0 quarts of AMSOIL 5W-50 Synthetic ATV/UTV Motor Oil (AUV50)
- 1 oil filter
Note: *Polaris owns the trademark rights of Polaris and the ATV/UTV models listed. No affiliation or endorsement claim, express or implied, is made by their use.
Just plug this thing in and no more seatbelt light! Allows you to add harnesses without causing limp mode to activate when driving!
Input terminal rating: M5 threaded studs(100A 32v DC.max) Input wire size: #4-6 AWG Output terminal rating: 30A max per circuit Output wire size: #12-16 AWG Red LED indicates when fuse is broken Accepting fuse:Standard blade fuse (ATO / ATC)
Fits all GENERAL and RANGER with the LARGER lock and ride holes. They are made of high grade stainless steel, and a ribbed gripping system that won't let go! They are sold per each.
