Side by Side Outlet Parts and Accessories

Don’t confuse this window with the others out there! This barrier goes down behind the seat for better protection from the elements and dust, unlike the other barriers. This barrier also has 9 buckles instead of the traditional 6, 30 gauge marine grade clear vinyl instead of the traditional 20 gauge plastic (that will crack and yellow over time) and 1680 denier ballistic nylon instead of the traditional 1000 denier Cordura used in the foreign windows. 1″ webbing sewn at all critical stress points like; top, bottom and below and above the window seam (as shown). The materials used are UV resistant and water repellent for years of carefree use. The most unique part of this rear window is you have the option of rolling it down and stowing it out of the way behind the seat when the weather permits (as shown). Don’t leave home without one. Drastically minimizes the dust and wind that enters the cab on those days everyone else is staying home but still provides all the visibility you need. Will not interfere with soft or hard tops.

The Fuel Runner UTV Wheel has the aggressive styling to set any machine apart from the pack. Featuring a swept 8-spoke design blended with a deep lip, the Fuel Runner is guaranteed to turn heads.  Fuel Off-Road Wheels provide unsurpassed quality and cutting-edge designs. Fuel Wheels set the industry standard on fit, finish, and value. Why not buy a complete wheel and tire package with Fuel Off-Road wheels. Fuel Wheels –setting the standard.

SEALED AGM BATTERY - you could mount this thing upside down if you wanted to, it will not spill!

Fits Polaris RZR 1000/Turbo, Ranger Full Size (570/800/9000/1000) and Diesel

Fits Kawasaki Mule 820/950/990

REPLACES 4012864, 4012864-P, 4014043, 4014132, 4014132-P, 4015591, 26PRMJ, 526MF

Group Size (BCI): 26; Cold Cranking Amps (CCA): 540 CCA; Cranking Amps (CA): 595 CA; Voltage (V): 12 Volt; Length (In): 7-3/4 Inch; Width (In): 6-1/2 Inch; Height (In): 7-3/4 Inch

Capacity at 10HR (Ah): 40, 32.8lbs, charge at 4amp or less

The Fuel UTV D783 Unit UTV is a cast aluminum wheel from Fuel UTV with a simulated beadlock ring. This wheel has a one year warranty on the finish. There is a lifetime structural warranty on the wheel itself.

• Comes with Can Am Specific Mount Kit
• Mounting brackets provide 7" of clearance above the bed rail, 18" from the bottom of the cargo bed to bottom of rack. (see pic)
• Quick 5-minute assembly
• Durable black powder coated finish
• 46.4" x 20" x 4.2" fully welded 1-piece steel basket with tie-down slots
• Drain hole slots double as vertical chainsaw carrying location

This mount allows you to use the Rugged Multi-Mount to install an intercom and/or radio into your Wildcat XX!  These are made from plasma cut steel that is then powder coated to match the factory dash finish.

Our rack support strengthens the week frame area from the topside of the mounting plate. The thin metal is prone to bending around the rack causing alignment issues. Simply bolt this on when installing the rack.

Rack Support:

• Machined 6061 Billet Aluminum
• Anodized for lasting finish
• Strengthens the Frame to prevent misshaping of frame where rack mounts

• Clever design gives you easy access to the gas tank for quick refills
• Multi-bend aluminum construction is light and stylish
• Heavy-duty frame with two mounting points provides long-lasting performance
• Automotive-style latch with simple handle for easy entry and exit
• Powder coated for maximum durability
• Ergonomic height for a comfortable ride
• Preassembled for a quick and easy installation

• 1/4" hard coated abrasive resistant material
• Scratch-resistant windshields are hard coated on both sides for extreme durability
• Protects against chemical and UV attack
• Contoured to hood with full length rubber seal for a great fit
• Easy to install - comes with all necessary hardware and instructions
• Can be used with soft or hard tops
• Add an LED Light Kit to brighten your night riding!

Polaris - Replaces OE PU-52907 / PA-48595

570 RZR 12-22

800 RZR (all models) 08-14

2016-19 ACE 325 and 500 Models

• Precise machining for accuracy
• Manufactured from the highest quality steel
• heat treated for superior strength

• Designed to pull even the toughest of clutches off the tapered crankshaft, made of high quality heat treated material
• Polaris RZR Pro XP Fitment: 2020-21 RZR Pro XP, 2020-21 RZR-4 Pro XP
• Polaris RZR XP Turbo Fitment: 2021 RZR XP Turbo S, 2021 RZR-4 XP Turbo S, 2021 RZR XP Turbo, 2021 RZR-4 XP Turbo
• Polaris Ranger Fitment: 2018-21 Ranger XP 1000, 2019-21 Ranger Crew XP 1000

• Designed to pull even the toughest of clutches off the tapered crankshaft, made of high quality heat treated material
• Polaris RZR Fitment: 2011-21 900 Models, 2014-21 1000 Models, 2016-20 Turbo Models (Will not fit Pro XP RZR or 2021 Turbo Models)
• Polaris General Fitment: 2016-21 1000 Models
• Polaris Ranger Fitment: 2013-19 900, 2017 1000 XP, 2017-18 1000 XP Crew (EXCEPT Diesel)

• Two heated clamp-on grips
• No adhesive required for installation
• Kit includes rubber grips, high/low round rocket switch, female spade connectors and cable tie
• Maximum 40 watts (20 watts per grip) at 14 volts
• Made in the U.S.A.

• Mount accessories to the roll cage with these clamps
• Mount windshields, lights, mirrors, etc.
• Quick-release without tools

2017-2017 ARCTIC CAT WILDCAT X 2017-2017 ARCTIC CAT WILDCAT X LIMITED 2020-2021 ARCTIC CAT WILDCAT XX 2018-2019 TEXTRON WILDCAT XX

Kawasaki

Fits 2015-2020 RZR 900 Trail, 900s, and 1000s models.  Includes one front and one rear bumper.

for two door models, click HERE

• Designed to fit in channel of Polaris roll cage.
• Mounts to factory door frame.
• Requires drilling in factory door skin.
• Once installed, can be quickly removed.
• Tested at -15° F to resist cracking.

for four door models, click HERE

• Designed to fit in channel of Polaris roll cage.
• Mounts to factory door frame.
• Requires drilling in factory door skin.
• Once installed, can be quickly removed.
• Tested at -15° F to resist cracking.

The GroundHog Max truly makes preparing food plots a one-man job. The GroundHog Max plow weighs 69 pounds and comes fully assembled. Easy to use "transport mode" allows the GroundHog to get to any remote food plot that your ATV/UTV can reach. The GroundHog Max can plow from 3-7 MPH and can even be used to plow in reverse. Although the GroundHog Max is half as wide as a normal plow, it makes creating food plots a breeze. In some states, land owners are required to have firebreaks around their property.  This plow can not only be used for making food plots, but also makes a great tool for creating firebreaks.  Creating firebreaks is now easier than ever using the GroundHog Max! In addition, the plow may also be used for duck hunting, landscaping and weed control.

Kit Contents: - Aluminum Hawse Fairlead (Magnetic) - Rubber Line Stopper (Magnetic) - Wiring and Receiver - Installation Hardware (Stainless Steel)

Utilizing magnetic auto-stop technology, the VIPER Winch Auto-Stop Fairlead replaces a traditional aluminum hawse fairlead and provides long-term protection for your winch and its components. When the magnets inside the rubber line stopper get close to the fairlead, the winch stops automatically. This eliminates over-winding, and prevents long-term stress on the winch, strain on the synthetic rope, and damage to attached accessories.

Features:

• • IP67 Waterproof Rating
• • Wireless Remote System with unique frequency
• • Flush Mount Dash Switch
• • Planetary metal gear train and permanent magnet motor
• • Automatic brake
• • Limited Lifetime Warranty (winch) / Rope (1 year)

Price reflects LOCAL PICKUP ONLY - Idaho Falls, ID  Contact direct for shipping, as it varies due to time of year but is generally $150-250 more.

Enhance the rider protection in your vehicle with a set of these high-value, versatile Canvas Upper Half Doors. They install easily atop the stock door panels in designated, integrated mounting locations, and they provide shade and reliable protection from the elements in cold weather conditions These Polaris Engineered doors have zip-out clean poly windows that provide light and visibility or, when removed from the vehicle, increase the airflow into the cab area. The 23 oz. mold resistant and UV stable material give these doors strength and durability against harsh weather conditions. The steel tube framework and vinyl crack resistant material all reinforce the strength of the doors. Once installed, these doors swing open and closed with the stock doors to provide rider ingress and egress. Combine with full windshield, lower doors, rear panel and roof for complete coverage in cold weather conditions.