Side by Side Outlet Parts and Accessories
Plug and Play Easy Install
Fits Honda Talon 2019 - 2021
Includes Billet Turn Signal Lever
Includes two .75" 3 LED front Amber Lights
Plugs into OEM Brake Light Harness, using Factory Rear Lights
Dash Mounted LED Lit Turn Marker Light Included
Laser Etched LED Lit Turn Switch
Lit Emergency Hazard Switch
Rear Power Out for optional license plate light
Made in the USA!
Plug and Play Easy Install
Fits 2018+ Polaris RZR Turbo S Models
Also Fits 19-21 Polaris RZR XP 1000/Turbo models with 3rd Brake Light
Includes Billet Turn Signal Lever
Includes two .75" 3 LED front Amber Lights
Plugs into OEM Brake Light Harness, using Factory Rear Lights
Laser Etched LED Lit Turn Switch
Lit Emergency Hazard Switch
Rear Power Out for optional license plate light
Made in the USA!
Plug and Play Easy Install
Fits Can-Am Maverick X3 and X3 Max
Includes Billet Turn Signal Lever
Includes two .75" 3 LED front Amber Lights
Plugs into OEM Brake Light Harness, using Factory Rear Lights
Laser Etched LED Lit Turn Switch
Lit Emergency Hazard Switch
Rear Power Out for optional license plate light
(Optional) front Signature lights available
Made in the USA!
- Retractable shoulder belts that allows more freedom of movement compared to other belts, and securely locks into place to provide superior safety.
- Fully adjustable to fit all size riders; easy to buckle and adjust, even while wearing your helmet and gloves.
- Secure restraint allows for better vehicle control and less ride fatigue.
Protect guns from the off-road elements on your UTV using this Black Double Gun Soft Case by Kolpin Powersports. This weather-resistant case is a must have for your next hunting trip.
Adapter Mount for UTV Vertical In-Cab Gun Rack (Rhino & Early Polaris® Ranger®). Allows you to adapt UTV Gun Rack specifically to UTV/SxS machines with raised transmission tunnel.
Adapter Mount for UTV Vertical In-Cab Gun Rack (Mid-Size Polaris® Ranger®) allows you to adapt UTV Gun Rack specifically to Polaris Ranger Mid-Size Models.
Vertical Gun Rack mounts to the cab floor or cargo bed of UTV or Truck to safely and securely transport (2) Shotguns or Rifles
The QuadGear UTV Double Gun Carrier by Classic Accessories provides heavy-duty ProtekX6 fabric with water-resistant backing and exterior coating for maximum weather and abrasion protection. Keeps two rifles protected and readily accessible on most UTV roll cages. When you buy a Classic Accessories powersports cover you are not just getting a cover; you’re also purchasing peace of mind. Not only will you be protected from the elements, but you’ll be protected with the easiest warranty in the industry. If your product fails within the warranty period, look for us online and take advantage of our Hassle-Free warranty program supported by our US-based customer service team.
Most popular and versatile Gun Boot® case for over 40 years! The Kolpin Gun Boot IV case has traveled around the world and back and is an industry standard in hard cases. Impact model includes a removable, shock absorbing foam and nylon Impact liner that provides superior interior protection
Big Sky Racks newest and most innovative product for UTV and side-by-side exploration with ROUND roll bars. For flat bar mounting or for profile-fit cages, see THIS one.
The original Sky Bar Series product. These racks were made with ease-of-installation, compatibility, and aesthetics in mind.
Our bread & butter retail product for rifle mounts. The Big Sky Rack is designed for ease of use, stability, and longevity.
We set out make the best knuckles available with the end user in mind. Through extensive testing and racer feedback we revolutionized the way bearing carriers are designed. With our Bearing Cartridge you no longer have to remove the bearing carrier to change wheel bearings. You also do not need special press tools to change your wheel bearings. Our bearing cartridge is threaded and can be threaded out and replaced with a new one to simplify wheel bearing changes. This is a HUGE improvement over traditional designs. There is no snap ring to fail nor press area on the carrier to lose tolerance. We also offer preloaded replacement cartridges so you can keep an extra set with you just in case you need to change a wheel bearing on the trail or on a riding trip. These also work great in racing applications where bearings need to be changed in a pit stop or between Motos in a timely manor.
Studs will be natural Titanium Finish
Polaris RZR Fitment Guide - All Years
- Polaris RZR XP Turbo
- Polaris RZR XP 1000
- Polaris RZR RS1
- Polaris RZR RS1 1000
Polaris Chromoly Wheel Hubs
- Hubs are sold individually
- Made from Chromoly
- Superior Strength won’t break like stock
- Great for all types of riding and racing
- HD Wheel Studs upgrade not included (see listing HERE)
If you have a CanAm X3 it is no secret that the rear knuckle is a problem area. The 2 main failures we have seen are with the middle toe link (Middle Radius Rod) and the wheel bearing snap ring. Our billet solution addresses both of these areas providing you with a worry free riding experience. In the videos below we explain how and what we did to fix these problematic areas.
Are you looking to add fuel capacity without using up any additional cargo space? Many times when you add engine modifications such as High Compression or Turbo/ Super Charger kits you sacrifice some fuel range. We now have a solution to the problem.
We designed our Throttle Body Intake Adapter to Maximize Flow Between the Air Intake System and the Throttle Bodies all while providing a more secure clamping area. The stock plastic intake is much smaller and more restrictive. Ours Flows from 50mm to 49mm increasing velocity for Optimum Fuel Atomization. Even something this small can make a difference.
Easily add 12v USB power outlets to your ride so you can charge or operate your devices. Easy plug n play wiring also provide plug to add additional accessories in the future. It provides 2 USB ports as well as giving a voltage display. This is a great addition to a racer or even a weekend trail rider.
- OEM connectors
- Easy Installation
- No Splicing Needed
The HONDA Talon’s 4x4 system is ECU controlled. Sometimes the system will kick out the 4x4 capabilities and then leave you with only being able to use the Talon in 2x4 mode. This 4x4 override kit allows you to keep the 4x4 engaged all time or revert back to stock 4x4 functions.
If you own a Honda Talon and you need to shift from High to Reverse or Low to Reverse in a hurry like many racers and aggressive riders do then our Shift Gate is what you need. We run these on our own race cars.
The Hess Motorsport Honda Talon 1000 X / 1000 R […]
The Hess Motorsport Honda Talon 1000 X / 1000 R […]
Want to get the most out of your Talon? Our Push Button shift kit will benefit even the most aggressive drivers giving you access to your shifters no matter which way the wheel is turned. We highly recommend this for use with our steering quickeners. This is a great addition to a racer or even a weekend trail rider.
- OEM connectors
- Easy Installation
- No Splicing Needed
- Aftermarket wheel with 6 bolt mount is REQUIRED.
Add power and gain reliability with a Dynojet Coil-On-Plug Kit for your 2020 Kawasaki TERYX KRX 1000. This kit includes two coils and a wiring harness, allowing you to easily upgrade the OEM ignition system.
- Replaces stock coil and wires with individual coil-on-plug design
- Increased spark energy
- Improves horsepower, torque and throttle response
Dynojet’s Fuel Pump Module for the 2017-2021 Can-Am Maverick X3 Turbo provides 50% more flow and 13psi higher pressure than stock. We’ve engineered this module to work with gasoline and ethanol.
If you run ethanol on your Polaris RZR XP Turbo, you’ll need Dynojet’s Flex Fuel Kit to get the most out of your vehicle. Maintain consistent fuel delivery despite variations in ethanol quality and tap into our signature Launch Control feature with this kit.
