Side by Side Outlet Parts and Accessories
OPTIONAL BUMP STEER REDUCTION SPACERS
Our tie rods also feature patented ST geometry that place a long spacer on the upper side which shifts the tie rod geometry further down than stock helping reduce an issue known as bump steer. Bump steer is essentially oscillation of the steering components as the suspension components cycle up and down. as the suspension compresses and extends, when the steering geometry is not in line with the suspension geometry this will cause the vehicle to unexpectedly change the toe degrees. This in turn causes extra negative feedback in the steering wheel and will drastically increase resistance in drive ability as well as increased wear on other components.
We call this a bump steer reduction as that is more closely what it is. Since we must operate within the mounting points of the factory knuckle, there is only so much adjustment that can be made. However, this kit will almost completely rid your vehicle of bump steer.
Our sway bar end links are the perfect upgrade for the factory link replacement. Our links are made from Billet 6061 Aluminum using all high quality hardware and FK brand JMX joints standard!
Our parts are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.
This fits all Models of the can am X3
- Product benefits are:
- 1.25 Solid Billet Aluminum Material
- Powder coated
- Stainless Hardware
- 5/8" FK JMX Series Heims
- Stainless Misalignments Spacers
- Sold as a set of six (6)
- Right Hand Left Hand Threads For Fast Adjustment
Machined after powder coat to put the final touches on an already quality piece.
Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 1.5"x 8" Aluminum bar stock. We then machine both pieces, send them out for powder coating and then round all of our corners to give it a look that really pops and will wow anyone.
Our plate is accompanied by stainless hardware mounting the hook to the plate and as our plate has a full lifetime warranty against any workmanship and defects and is produced right here in the U.S.
If you have a CanAm X3 it is no secret that the rear knuckle is a problem area. The 2 main failures we have seen are with the middle toe link (Middle Radius Rod) and the wheel bearing snap ring. Our billet solution addresses both of these areas providing you with a worry free riding experience. In the videos below we explain how and what we did to fix these problematic areas.
Set inlcudes 6 rods total.
4 Billet High Clearance
2 Billet Straight Rods- Right Hand Left Hand Threads
All heims and needed hardware included.
2 Week Lead Time On ALL colors
Frame Gusset Plate
The gusset plate is a necessary solution in many cases. The gusset plate helps to make X3 more rigid by reducing deflection in the front end of the machine, as well as adding a little bit of beef to the front of the machine.
When using the X3 to its potential there is a very high risk of causing extra deflection in the front end letting the upper shock mount area and the lower frame where the control arms connect move undesirably from the shock load. Tie your frame together with this gusset and our upper shock tower brace making it best way to protect that precious radiator fan from permanent and expensive damage.
You must use this with either our limit strap system or with our aluminum shock tower brace to be effective. This gusset plate will not attach to your factory pieces.
Made from 3/16 mild sheet steel, tig welded and includes a grommet for hoses to pass through without damage.
*THIS KIT DOES NOT INCLUDE LIMIT STRAPS! IT IS THE SHOCK TOWER BRACE, AND GUSSET KIT ONLY!
This filter will fit the Can Am X. Desertcraft has developed this filter for severe duty. The Desertcraft filter meets or exceeds in every category over the competition in this segment and it has the advantage of being serviceable. You will definitely save in the long run over one time use, throwaway filters. The specialty filter media is highly durable and has an efficiency rating that far exceeds the stock element for effiency. The Desertcraft filter is a dry element that requires no special cleaner or oil to service. It is serviceable !!!! To service the filter you simply blow it out from the clean side with compressed air or vacuum from the dirty side. The filter can be soaked in a soapy solution rinsed and air dried too.
Our Front sway bar end links are the perfect upgrade for the factory link replacement. Our links are made from Billet 6061 Aluminum using all stainless hardware and chromoly heim joints.
Our parts are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.
This fits ALL Models of the can am X3. No exclusions
