Side by Side Outlet Parts and Accessories
The Polaris RZR XP Turbo is one of the most popular SXS vehicles to modify in the UTV market. After you have done all the basic bolt-on modifications such as exhaust, intake, ECU flash, and clutching, the next biggest gain in horsepower is from doing a full turbo upgrade. The factory turbocharger performs well in the 925cc, 2 cylinder engine, however there is much more to gain. An upgraded turbocharger will flow more air, requiring less boost pressure to gain power. But when you do increase that boost, be ready for an amazing push of performance! For those that want the ultimate edge on their friends and competitors, a turbo upgrade is the only answer.
Agency Power has partnered with one of the leading turbo manufactures to offer this full bolt-on turbo upgrade for the Polaris RZR XP Turbo. What makes the Agency Power Turbo better than the competition is that this is a complete OEM replacement. This is not a compressor cover, wheel modification, core exchange, or anything else that some others have available. This is a full replacement turbo that is a direct fit to your factory parts. The factory oil lines, intake and inlet pipes, and exhaust parts all bolt up to this turbo so there is no need to get extra parts or replace many of the current modifications you might already have. Completely made in North America, the turbo features a full cast manifold, new adjustable wastegate, larger compressor and turbine wheel, along with an enhanced turbo housing finished in gloss red with the Agency Power logo.
Whether you are going to be trail riding, ripping the dunes, or even competing in the desert, the Agency Power upgraded turbocharger for the Polaris RZR XP Turbo is for you. This turbo can be used as a bolt-on replacement for the factory turbo or you can partner with your preferred tuner to unleash its full potential!
Specifications:
- OEM Turbo flows up to 0.16kg/s
- AP Turbo flows up to 0.21kg/s
- Airflow is increased by 31% over stock
- Compressor Wheel
- Inducer- 41mm
- Exducer- 51mm
- Turbine Wheel
- Inducer- 45mm
- Exducer- 40.4mm
Features:
- Bolt-on no modifications required to fit
- Powdercoated red compressor cover with AP logo
- Made in North America
- No Core required, keep or sell your OEM turbo
- More consistent torque curve
- Less dip in top end power band
- Stays in torque longer
- 40+ HP gain on pump gas with tuning and supporting mods
- 50+ HP gain on race gas with tuning and supporting mods
Notes:
- This is for the bolt-on turbocharger only. This does not include tuning or other supporting modifications.
- Recommended Parts for Installation:
- Exhaust System
- Blow Off Valve
- Silicone Intake and Turbo Inlet Pipes
- For maximum performance, bigger injectors should be used. This depends on your tuner
- Turbo Heat Blanket for K04 Size Turbo – Excessive Heat Can Occur
- Clutching
- AEM Wideband Failsafe Gauge to monitor boost and AFR – Not required, great add-on to monitor vitals.
- ECU Tuning – Absolutely required!
Fitment:
- 2016-2020 Polaris XP Turbo | XP4 Turbo
- 2019-2020 Polaris XP Turbo S | XP4 Turbo S
- OEM Replacement for Polaris Part Number 1205689
The Polaris RZR XP Turbo can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the RZR XP Turbo even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Polaris RZR XP Turbo or other uses.
The Agency Power Polaris RZR XP Turbo Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and Has a 5/8 Through Hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Gloss Red
- Made in the USA
Fitment:
- Polaris RZR XP Turbo 2016+
- Polaris RZR XP 4 Turbo 2016+
The Polaris RZR XP Turbo can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the RZR XP Turbo even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Polaris RZR XP Turbo or other uses.
The Agency Power Polaris RZR XP Turbo Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and Has a 5/8 Through Hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Satin Black
- Made in the USA
Fitment:
- Polaris RZR XP Turbo 2016+
- Polaris RZR XP 4 Turbo 2016+
Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.
Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.
The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.
Feautures:
- Spacers are 2-inches wide each
- 4x156 - M12x1.5 - 131mm hub bore
- Improves overall handling of your machine
- Increases the track width
- Provides more aggressive offset and stance
- Durable and light-weight aluminum construction
- Steel lug studs prevent seizing of lug nuts
- CNC machined for precision fitment
- Limited One-Year Warranty
Fitment:
- Polaris RZR 1000 (all)
- Polaris RZR 900 / S / XC 2015+
- Polaris RZR XP Turbo
- Polaris Ranger 900 (all)
- Polaris Ranger 1000 (all)
- Polaris General 1000 (all)
- Kawasaki Mule Pro (all)
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.
Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.
The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.
Feautures:
- Spacers are 2-inches wide each
- 4x156 - M12x1.5 - 131mm hub bore
- Improves overall handling of your machine
- Increases the track width
- Provides more aggressive offset and stance
- Durable and light-weight aluminum construction
- Steel lug studs prevent seizing of lug nuts
- CNC machined for precision fitment
- Limited One-Year Warranty
Fitment:
- Polaris RZR 1000 (all)
- Polaris RZR 900 / S / XC 2015+
- Polaris RZR XP Turbo
- Polaris Ranger 900 (all)
- Polaris Ranger 1000 (all)
- Polaris General 1000 (all)
- Kawasaki Mule Pro (all)
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
When it comes to making more power, heat becomes an issue that can hold you back. Turning up boost pressure or upgrading to a bigger turbo will result in additional heat. This is due to the turbocharger generating more energy which is a direct translation to higher heat levels. To combat this issue, Agency Power has released a turbo/manifold blanket for your Agency Power upgraded turbo on your Polaris RZR XP Turbo!
Containing the heat produced by your turbocharger can pose many benefits. Your turbocharger will increase efficiency by isolating the heat to the hot side. This will keep heat away from the compressor side which results in cooler intake air temperatures (IAT). Reducing the IAT will correspond to extra horsepower. Additionally, having the heat dispersed through the turbo blanket will reduce the overall engine bay temperature up to 60-percent.
The blanket consists of pulverized volcanic lava rock woven into a tight weave that can withstand a whopping 1800°F of direct heat and 2500°F of radiant heat. The inner insulation layer is constructed from extreme conditions calcium magnesium silicate wool. To tie everything together, a fine weave steel mesh conjoins all the materials to provide ultimate heat containment.
Features:
- Fit's Agency Power big turbo upgrade
- Reduces the overall engine bay temperature by 60-percent
- Can withstand 1800°F of direct heat and 2500°F of radiant heat
- The outer layer is constructed from pulverized volcanic lava rock
- Inner layer features calcium magnesium silicate wool
- Isolates heat from the compressor side
- Lowers the intake air temperature significantly
- Hand-crafted in the USA!
- One-year warranty
Fitment:
- Polaris RZR XP Turbo 2016-2020
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
The Polaris RZR XP Turbo exhaust system can be one of the best performance modifications you can do. Like most turbocharged vehicles, backpressure is not a requirement. A turbo is at its peak performance with no restrictions right out of the turbo exhaust housing. Where this is common on racecars, normal use can become unbearable. Cruising forest trails or high traveled roads could be deafening loud and not the most PC way to ride. However, you can have the best of both worlds with an Agency Power valvetronic exhaust system.
Agency Power has been manufacturing valvetronic exhausts for vehicles since 2008. A valvetronic exhaust features a remote operated valve that can be opened and closed at the push of a button. This allows you to redirect the exhaust flow which changes the exhaust sound. On most vehicles, when the valve is closed, the exhaust gases are routed through a muffler to give you a more subtle tone. When the valve is open, the exhaust gases typically bypass the muffler system for a straight restriction free path. The end goal is to give you all the power and performance!
Some exhaust systems feature a valve after the muffler which blocks one of the tip exits to slightly quiet the tone. This may change the sound by a few decibels, but is still very restrictive. The exhaust flow going through the chamber muffler is not giving your turbocharger any additional performance between the modes. To really get the most performance and sound, you want to put the valve before the muffler. This design drastically changes the sound of your RZR XP Turbo. With the valve open, the straight exit exhaust will build boost faster giving you the jump on your competition. The turbo spool is noticeably faster allowing you to gain peak performance sooner.
The Agency Power valvetronic exhaust for the Polaris RZR XP Turbo is made here in Arizona, USA. It is constructed of T304 stainless steel that has been hand TIG welded using proven JIGs and vehicle testing. The exhaust mounts directly to the turbo pipe with a thick 3 bolt flange. A beautiful merge splits between the chambered Magnaflow muffler and the exhaust valve. The muffler was spec’d to provide a sporty tone when the valve is closed. Exiting each side of the muffler is a straight cut 2.50 inch turn down exhaust tip with holes to install a spark arrestor. With 2 tips, you can reuse your existing spark arrestor and optionally purchase 1 or 2 from us as needed. The included remote components operate the butterfly valve via a vacuum solenoid. The solenoid is tapped into a vacuum source on the RZR XP Turbo engine which opens and closes the valve with the remote key fob. The key fob sends the signal to a remote box which controls the solenoid. The remote box is sealed however it is recommended to be installed in an area not prone to water.
Each system includes a new Agency Power exhaust shield. The exhaust shield is precision water jetted out of stainless steel feature the AP logo and a unique design element. The heat shield is designed specifically for this exhaust system. The exhaust mounts to factory hanger and bracket positions. This system is a complete bolt-on installation and does not require any cutting, welding, or other exhaust modification. The exhaust features a bung for the factory O2 sensor. Additional O2 bungs can be welded on for those running aftermarket AFR gauges.
Features:
- Valvetronic Dual Tone Sound
- Includes Remote Key FOBs
- Uses Magnaflow Muffler
- Stainless Steel Construction
- Allows for Use of Spark Arrestors
- Included AP Logo Heat Shield
- Available in RAW Stainless or Black Coated
Notes:
- Exhaust may be made to order taking 2-4 weeks
- Remote electronic box should be mounted in a water tight area
- Electronic module requires power and ground wiring
- View Installation Instructions Here
Fitment:
- Polaris RZR XP Turbo 2016-2021
- Polaris RZR XP4 Turbo 2016-2021
The Polaris RZR Turbo needs an exhaust system to help the turbocharger flow freely and improve performance. Agency Power has created the best exhaust system that is a simple plug and play for the RZR XP Turbo platform. The twin tip, side exit exhaust was designed to balance exhaust flow without causing obnoxious noise over the factory unit. The system is built from T304 stainless steel and features precision TIG welds. The dual high flow resonators are secured in place with a laser cut cradle that features the AP logo. The type of resonators used can be seen in many of the Agency Power high performance vehicle exhausts, which on turbo cars, produce a beautiful sound. Designed as a direct replacement, the Agency Power exhaust uses the factory hanger locations and bolts up to the stock turbo pipe without modifications. The exhaust features a thick flange and includes a new gasket with hardware. Each tip outlet has been designed to work with spark arrestors that can be optionally purchased. The final product is completely polished for a show finish giving the rear end of the RZR Turbo a sexy look with a satisfying sound. As tested on our Mustang Dyno, the exhaust gained about 5-6 peak horsepower over stock. Even more important testing was proven when XTC Power Sports ran this exhaust system on their 2017 competition vehicle during the grueling 500+ mile Vegas to Reno race. The exhaust is a great addition to any RZR XP Turbo along with our other Agency Power Polaris accessories.Features:
- Polished Stainless Steel Constructions
- Precision TIG Welding
- Clean and Satisfying Sound
- Direct Bolt-On
- Can be used with Spark Arrestors
- Race Proven
Fitment:
- Polaris RZR XP Turbo 16-18
- Polaris RZR XP4 Turbo 16-18
Adding a vent to atmosphere Blow Off Valve on the Polaris RZR turbo system is a great way to improve throttle response and hear that awesome blow off valve turbo sound. With an ECU tune and higher boost levels, the Polaris RZR can gain 10-15% more power over stock. However the stock plastic diverter valve is ill equipped to handle this increase. One option is to replace this valve with an aftermarket diverter valve like Agency Power also offers. But for those that want to hear the whoooosh sound, there is this adjustable vent to atmosphere blow off valve! The purpose of a BOV is not just to sound cool, but it is designed to release the pressure that is built up in the charge side of the system. The factory diverter valve system dumps this pressure back down into the intake pipe. This can cause turbulence to the impeller, slowing the spool of the turbo down and causing premature wear.
The Agency Power blow off valve for the Polaris RZR can be used in conjunction with the stock turbo inlet pipe or any aftermarket turbo hose pipe that has a 1 inch BOV flange. Since the factory valve is a diverter valve and this new valve is designed to be 100% vent to atmosphere, we include a high-temp push on plug cover for the eliminated return hose. Each Agency Power valve is machined from 6061 billet aluminum then anodized in a stealth black finish. The top is laser engraved with the Agency Power cursive logo and directions for adjusting. When the top of the valve rotates, this allows you to adjust the spring tension for your application. You can set the valve to easily vent off pressure or be stiffer to only vent at maximum PSI.
Features:
- CNC Machined Aluminum Constructions
- Anodized Black
- Adjustable
- Pro Longs Turbocharge Life
- Great Blow Off Valve Sound!
Notes:
- View Installation Instructions
- Includes Fitting Kit
Fitment:
- 2016-2019 Polaris RZR Turbo 2 | 4 Door
The Polaris RZR XP Turbo and Turbo S can take the factory drive belt to its limit with performance upgrades and hard driving. Knowing that the drive belt is a critical piece to your Polaris RZR Turbo, Agency Power now has this upgraded performance drive belt. The new Agency Power Drive Belt has a double notch design that is a direct replacement for the OEM Polaris belt. Each belt uses a Kevlar fiber construction to give the belt more strength, along with better chemical and heat resistance. As a direct factory replacement belt, installation is the same with the upgraded Agency Power performance belt. Now you can ride with confidence to deliver the power you want to the ground and keep your weekends going!
Features:
- Kevlar Reinforced
- Double Notch Design
- Factory Replacement
- Stronger and More Chemical Resistant
- Replaces OEM Part Number:
- 3211186
- 3211202
Fitment:
- 2016-2019 Polaris RZR XP Turbo and XP4 Turbo
- 2018-2019 Polaris RZR XP Turbo S and XP4 Turbo S
- 2018-2019 Polaris RZR RS1
- 2018-2019 Polaris Ranger XP 1000
- 2019 Polaris Ranger Crew XP 1000
Note:
- Proper belt break-in:
- Vary your speed and engine RPM to allow belt to shift through normal operational range
- During the first 30 miles of installation do not exceed ¾ throttle
- Every 15 minutes of use stop engine and allow belt to cool down
- Avoid the following activities during break-in:
- Aggressive acceleration or jerky throttle at low speeds
- Holding speed or RPM constant for extended time periods
- Pulling heavy loads
- Excessive driving without CVT/belt cool down
The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.
Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2016-2019 Polaris RZR XP Turbo
- 2018-2019 Polaris RZR Turbo S
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.
Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2016-2019 Polaris RZR XP Turbo
- 2018-2019 Polaris RZR Turbo S
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
