Side by Side Outlet Parts and Accessories
Fuel Off-Road has been capturing the attention of off-road enthusiasts with our cutting edge designs, fitments, and technological advancements. Fuel Off-Road manufactures the most advanced off-road wheels, offering the latest in design and engineering innovations on the market.
Fuel Off-Road has been capturing the attention of off-road enthusiasts with our cutting edge designs, fitments, and technological advancements. Fuel Off-Road manufactures the most advanced off-road wheels, offering the latest in design and engineering innovations on the market.
Features
- Full-length steel skid plate to prevent sinking on sand and damage.
- 8" or 15" adjustable extension to lift high clearance off road vehicles.
- 52 LBS Aluminum Jack.
- Carrying Handles.
- 2'2" (8" extension) or 2'9" (15" extension) Lift Height.
- High capacity, non-pneumatic, composite wheels for durable, heavy lifting.
- Sealed ball bearings for smooth rolling and operation in difficult conditions.
- 2 Year Warranty.
- Patented Design.
Please note that this is not a bolt on wheel kit. This jack does not have standard wheels and cannot be converted to a standard jack. It is built at our factory as a big wheel monster.
- Grab Handle
- Full-length steel skid plate to prevent sinking on sand and damage.
- 4" - 8" (with 8" Extension) or 10"-15" (with 15" Extension) adjustable extension to lift high clearance off road vehicles.
- 60 LBS Aluminium Jack.
- Side Handles.
- 2'4" Lift Height (with 8" Extension), or 2'11" (with 15" Extension)
- High capacity, non-pneumatic, composite wheels for durable, heavy lifting.
- Sealed ball bearings for smooth rolling and operation in difficult conditions.
- 2 Year Warranty.
- Patented Design.
Features:
- Fit's Agency Power big turbo upgrade
- Reduces the overall engine bay temperature by 60-percent
- Can withstand 1800°F of direct heat and 2500°F of radiant heat
- The outer layer is constructed from pulverized volcanic lava rock
- Inner layer features calcium magnesium silicate wool
- Isolates heat from the compressor side
- Lowers the intake air temperature significantly
- Hand-crafted in the USA!
- One-year warranty
The Can-Am Maverick X3 can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the Can-Am X3 even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Can-Am X3 or other uses.
The Agency Power Can-Am X3 Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- View Install Instructions Here
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and has a 5/8 thru hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Satin Black
- Made in the USA
Fitment:
- Can-Am Maverick X3 900 2018
- Can-Am Maverick X3 Turbo 2017+
- Can-Am Maverick X3 Turbo R 2017-2019
- Can-Am Maverick X3 X DS Turbo R 2017+
- Can-Am Maverick X3 X DS Turbo RR 2020+
- Can-Am Maverick X3 X RC Turbo 2018+
- Can-Am Maverick X3 X RC Turbo R 2018+
- Can-Am Maverick X3 X RC Turbo RR 2020+
- Can-Am Maverick X3 X RS Turbo R 2017+
- Can-Am Maverick X3 X RS Turbo RR 2020+
- Can-Am Maverick X3 X MR Turbo 2018+
- Can-Am Maverick X3 X MR Turbo R 2018-2019
- Can-Am Maverick X3 X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX Turbo 2017+
- Can-Am Maverick X3 MAX Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo RR 2020+
- Can-Am Maverick X3 MAX X MR Turbo R 2019+
- Can-Am Maverick X3 MAX X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX X DS Turbo 2017-2019
- Can-Am Maverick X3 MAX X DS Turbo R 2020+
- Can-Am Maverick X3 MAX X DS Turbo RR 2020+
Upgrading the motor mounts on your Polaris RZR XP Turbo or RS1 is a great way to improve performance and power delivery. The stock motor mounts are a cast piece which has a rubber insert that can move a lot under acceleration and braking. With this movement of the engine under load, you are delaying the power transfer and causing biased weight distribution. The harsh off-road conditions of aggressive driving and jumping can lead to further failures or damage to components. It is also common for rubber bushings to corrode and crack over time. Upgraded motor mounts are designed to limit the amount of movement that the engine and transmission produce in driving conditions. In addition to being a great upgrade over stock, the motor mount kit will give you a stout and responsive feeling under all driving conditions.
The Agency Power 3 piece motor mount kit is specific for the RZR XP Turbo and RS1 as they have a different rear mount than the XP1000. Each piece is Made in the USA from billet 6061 aluminum. The parts are CNC machined to feature a sleek design with an OEM fitment. Each mount features a polyurethane bushing with a Shore Durometer of 88 to provide a perfect balance for weekend fun and competition needs. The mounts included machined aluminum spacers to fit with the factory motor mount tube or transmission bracket. Each mount has two locating dowel pins for a precision fitment. The mounts have been anodized in our Agency Power smoke gray finish and feature a laser engraved Agency Power text logo on top.
Features:
- 6061 CNC Machined Aluminum
- 88 Shore Durometer, Polyurethane Bushing
- Anodized Smoke Gray Finish
- Reduce Engine/Transmission Movement
Fitment:
- 2016-2018 Polaris XP Turbo
- 2016-2018 Polaris XP4 Turbo
- 2018 Polaris Turbo S
- 2018 Polaris RS1
Notes:
- View our installation article here (From RZR XP1000)
The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.
Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2016-2019 Polaris RZR XP Turbo
- 2018-2019 Polaris RZR Turbo S
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
The Polaris RZR XP Turbo can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the RZR XP Turbo even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Polaris RZR XP Turbo or other uses.
The Agency Power Polaris RZR XP Turbo Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and Has a 5/8 Through Hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Satin Black
- Made in the USA
Fitment:
- Polaris RZR XP Turbo 2016+
- Polaris RZR XP 4 Turbo 2016+
The Polaris RZR XP Turbo can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the RZR XP Turbo even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Polaris RZR XP Turbo or other uses.
The Agency Power Polaris RZR XP Turbo Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and Has a 5/8 Through Hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Gloss Red
- Made in the USA
Fitment:
- Polaris RZR XP Turbo 2016+
- Polaris RZR XP 4 Turbo 2016+
Fuel Off-Road has been capturing the attention of off-road enthusiasts with our cutting edge designs, fitments, and technological advancements. Fuel Off-Road manufactures the most advanced off-road wheels, offering the latest in design and engineering innovations on the market.
