Side by Side Outlet Parts and Accessories
Convex Mirrors offer a custom billet look while working better than any mirror on the market. The low profile billet clamps will not interfere with most windshields. The extended reach design gets the mirror out far enough so you can actually see what is behind you. The slight convex glass design offers a wide view without over distorting the view. Mirrors will breakaway forward and backward to help prevent damage in case of contact with stationary objects.
*sold as pair
Take maintenance into your own hands! These wheel bearing grease tools allow you to perform a simple task list to keep your wheel bearings operating at peak performance:
Remove the wheel, remove the caliper, and take off the axle bolt. Insert grease tool and pump with grease. Reverse and move to next wheel, it really is that simple!
Choose your size needed below.
.
Simple to install! Let this battery isolator take the worry from your mind by making sure you primary battery always has power! Wire all you accessories into the secondary battery and you will never again be left stranded with a machine that won't start! We have personally tested these TrueAm products for tens of thousands of offroad miles, and they keep on performing!
This kit includes enough wiring to set up two batteries in close vicinity of one another. Therefore, it works great for most RZR applications where you are putting a second battery under the same seat, or in the new X3 where you are putting it in the same battery box. Adding a second battery vs putting in one large one is really the best way to go because it ensure you will never run the primary battery dead.
Just like the UTV-SBI-CK, this kit includes enough wiring to set up two batteries in close vicinity of one another. However, added to this kit is a voltmeter so you always know the state of charge for each battery. Adding a second battery vs putting in one large one is really the best way to go because it ensure you will never run the primary battery dead.
- Fits: 2011-14 RZR 800, 2011-2014 RZR-S 800, 2011-2014 RZR XP900 and 2012-2018 RZR 570
- DOES NOT FIT: 2008-10 RZR, see this one instead.
Now, you can install a full size battery in your RZR. Fits under the drivers seat and replaces the small stock battery. Hold either a full size Optima or an Odyssey PC925 (Length 9-7/8 x Width 7-1/8 x High 6-1/2). Comes with two straps to secure either size battery. Also, comes with lugs to convert a battery lug to a marine type terminal.
Pictured with an Optima 34/78-980 Red top and an Odyssey PC925 (battery not included).
This heavy duty battery tray fits under the hood of your Maverick XD S (Turbo). It attaches to the frame with self-tapping screws provided making installation very easy, simple and fast. It is pictured with an Optima 34/78-980 Red Top battery (not included) you can use any 34/78 series battery. Also, included is battery lugs to adapt from a top post battery to a 5/16” stud.
Made of heavy duty ballistic material, snaps to attach, and marine grade zippers. These doors fit the CFmoto Zforce 1000 Z1000 with bottom filler panels. Windows can be fully unzipped and removed during the warmer season.
Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl.,
This is a full glass windshield - laminated 1/4 safety glass that is DOT approved (not stamped) surrounded my a sturdy steel frame. The bottom portion of each side flips open to allow air to flow underneath. BUILT IN USA!
Local Pickup Only
This is a full glass windshield – laminated 1/4 safety glass that is DOT approved (not stamped) surrounded my a sturdy steel frame. The bottom portion of each side flips open to allow air to flow underneath.
BUILT IN USA!
IN STOCK and ready to ship. Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl. For four seat models CLICK HERE
IN STOCK and ready to ship. Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl. For two seat models CLICK HERE.
We also carry the Polaris OEM upper doors HERE that don't require a zip/unzip.
-These are made from a flexible and durable rubber compound.-Logo is 3D raised.-Chrome chain and keyring.
Includes 1 Year of Service No Contracts No Monthly Fees Unlimited Tracking Hardwired Geo Fence Alerts Any Weather Conditions Easy Installation Off Road & Marine —Back-up Battery———— Tilt Alerts US, Mexico and Canada 4G Network 2.5 x 3.125 x 0.875 Only $20 Yearly Renewals
Headers designed for the maximum power output Single Lambda sensor comes standard Constructed from Aerospace grade hi heat Titanium alloys Advanced welding process showcases laser perfection welds Long Tapers with Precision fitment and "butt" welds Spigots designed to allow the headers to float free without leaks Flanges are made from 7075 hard anodized aluminum. Built to last!
Exhaust System Saves 14.7 lbs. over stock setup. 83 db at Idle / 96.5 db at 4000 rpm Fitment: Yamaha YXZ 1000r (All) 2016 - 2019
The Goal of Graves when designing this X3 exhaust system was to provide the best performing, highest quality product on the market. We did not compromise in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range.
- 5 HP / 5 Torque Power Increase (slighly less with sound insert)
- Sounds reducing insert included in kit (USDF/USDA approved spark arrester. Approved).
- Fuel injection system tuning not required
- Exhaust System Saves 16.8 lbs. over stock setup. (Stock 24.4 lbs / Graves 7.6 lbs) 69% WEIGHT SAVINGS OVER STOCK SETUP!
- Graves Cat Back with Insert @ IDLE 90.5 / DB at 3500 RPM 94.7
- Graves Cat Back No Insert @ IDLE 91.5 / DB at 3500 RPM 97.5
- Stock @ IDLE 78.5 / DB at 3500 RPM 87.2
- 4 channels, 2 x 30 amp and 2 x 10 amp circuits
- RF Remote with rocker-style switches usable inside or outside the vehicle
- Bluetooth control using our iOS and Android mobile app
- Manual buttons for individual circuit power on top of control box
- Built in DIN connector for use of conventional toggle switches (harness sold separately)
- Four 12-24 volt output harnesses with pre-installed waterproof connectors
- Built in fuses with o-ring sealed cover: two 30 amp and two 10 amp
- High intensity LED’s indicate circuit status, blue for circuit on, red for blown fuse
- Waterproof case design, withstands temps from below freezing to 250 degrees F
- 12 to 24 volt input, 3 wires, ground, switched positive, battery positive
The TRIGGER ONE is a solid state relay with built in Bluetooth connectivity.
Simply unplug a standard relay and plug in the ONE. Once powered it can then be controlled via the free Trigger Plus app.
The TRIGGER ONE works in new or existing installations to add wireless control as well as dimming and flashing to the attached accessory.
Specs for AAC Part Number 4001: Voltage: 12VDC Capacity: 30 Amps Dims (body): 1" x 1" x 1" Dims (total): 1.95" x 1" x 1" Poles: Single Pole/Single Throw Compatibility: Android/iOS
DENALI Standard Series ATV/UTV Snow Plows are made to handle the toughest conditions including sand, snow, and ice. The "Easy-Connect" design created by MotoAlliance engineers makes attaching and detaching the plow an extremely easy process. This Center Mounted plow disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact.
Please Note: all DENALI UTV Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, Max or Midnight winch with an automatic brake found HERE.
Kit Contents:
- UTV Snow Plow Blade - Straight
- Choice of Pushtube
- Two (2) Wearbars
- Skid Feet
- Installation Hardware and Instructions
- Machine Specific Mounting Plate
[contact-form][contact-field label='Year' type='name' required='1'/][contact-field label='Make' type='email' required='1'/][contact-field label='Model' type='text' required='1'/][/contact-form]
DENALI UTV Snow Plow Hydro-Turn Systems make quick work of turning snow plow blades and hold fast when hitting even the biggest snow banks. They allow you to turn your snow plow side to side hydraulically without getting off your machine.
https://youtu.be/E8ZLucIhexE
DENALI ATV/UTV Snow Plow Pulley Fairlead Kit is ready for snow! Designed specifically to resist wear from the steep angle that occurs between the winch and the plow, thus extending the life of your plow lift system.
https://youtu.be/qWDHnSY3Nuc
