Side by Side Outlet Parts and Accessories

Anytime you remove a panel on a Can Am, one of these seems to get lost in the skidplate, or down into some abyss.  Order a spare to replace the next one!

This bracket allows you to run a Group ETX30LA Battery VS the standard ETX20L in your Can Am Maverick Trail or Sport!  Bracket is made from steel, and then powdercoated black.  OEM is Steel and black.  BLEMISHED has cosmetic issues but functions well - our fab department made a mistake on a few.

ON BACKORDER - see similar product HERE

PUT AN END TO THE PROBLEM OF DUST AND DIRT IN YOUR ENGINE NOW! SAVE MONEY BY WASHING YOUR FILTER INSTEAD OF REPLACING IT!

REPLACES OE# 17215-HL6-A00

CAN AM CENTER CONSOLE HEAT SHIELD COVER for 2-Seater only!... w/ Removable Cup Insert for Easy Cleanup. Built with Next Gen Heat Reflective material- 99.0% Radiant Reflectivity! Easy install seatbelt slots. A heat reflective console cover made of water-repellent outer fabric, padded and lined with Next Gen Heat Reflective material. Attaches easily to the center console with velcro and grommets that utilize the existing console screws. The cup holder insert is easily removed for quick cleanup. Available in black only! Made in USA.

• Clamp on mounting for positive seal - Ends leaking/dust ingress around the seal.
• 47% Increase in dust holding over the OEM filter - Maximum power and extended service intervals
• 99.992 efficiency - Unmatched on ISO fine dust - Keeps the finest dust and silt out of your engine!
• Washable and Reusable - Super-tough, synthetic hybrid fiber structure specifically designed for a simple maintenance routine using compressed air or vacuum.  Wash when needed. Last's for years, saving you money after a few uses!
• No Oiling - Just clean it, let it dry and roll out!
• Great for Off-Road, Sand, Trail Riding or Anywhere you ride your Polaris!

https://youtu.be/p2ZetJeiXUY

Details

The Tusk UTV Seat Heater is the ideal accessory to add to your machine when riding in cold weather conditions. The seat heater panel fits under your seat cover and connects to your battery for easy installation. This heater includes a switch with High and Low heat settings to make it easy to set your comfort level. It would be a great addition to your cold weather rides and plowing snow with your UTV. Works on most UTV applications. When in need of parts and accessories for your dirt bike, ATV, or UTV, think TUSK!
• Tusk UTV Seat Heater is perfect for cold weather riding conditions.
• Switch includes High and Low heat settings for the ideal comfort level.
• Easily installs under the seat cover and connects to the battery of the machine.
• Works great for most UTV applications.
• 50 Watts
• Max Temp of 158 F (70C).

• Some drilling is required to install the switch.
• Sold Per Seat.
• Dimensions: 10.75"x18.5

When out riding you want to make sure that you are seen by other riders. Mounting a flag to your machine gives other riders knowledge that you are on the dune hill, on the track or trail. Flags come in all different styles and designs. So get out and ride and have some fun, but make sure that you have the right tools like your flag.

• Durable aluminum construction.
• Black anodized.
• 1/2" Flag mounting hole.
• Mounts on vertical or horizontal roll cages.
• Mounts to machines with 1-¾" or 1-7/8" roll cage tubes.
• Extra heavy duty to support large flags or large LED whip flags.
• Adjustable in 15 degree increments.
• Includes all mounting hardware.
• Flag sold separately.

PUT AN END TO THE PROBLEM OF DUST AND DIRT IN YOUR ENGINE NOW! SAVE MONEY BY WASHING YOUR FILTER INSTEAD OF REPLACING IT!

REPLACES OE# 11013-0782

-Great for race and recreational applications. Make your bumpers/spare tire carriers/roof racks/doors and many other items bolt on !

FREE SHIPPING

Mudslinger® (AMS) provides a protective, non-stick layer of armor against the accumulation of mud, dirt and snow on ATVs, UTVs and dirt bikes. It makes removing mud and dirt with low-pressure water easy while protecting against UV rays and keeping equipment looking pristine.

Take maintenance into your own hands!  These wheel bearing grease tools allow you to perform a simple task list to keep your wheel bearings operating at peak performance:

Remove the wheel, remove the caliper, and take off the axle bolt.  Insert grease tool and pump with grease.  Reverse and move to next wheel, it really is that simple!

Choose your size needed below.

.

• Clamp on mounting for positive seal - Ends leaking/dust ingress around the seal.
• 47% Increase in dust holding over the OEM filter - Maximum power and extended service intervals
• 99.992 efficiency - Unmatched on ISO fine dust - Keeps the finest dust and silt out of your engine!
• Washable and Reusable - Super-tough, synthetic hybrid fiber structure specifically designed for a simple maintenance routine using compressed air or vacuum.  Wash when needed. Last's for years, saving you money after a two uses!
• No Oiling - Just clean it, let it dry and roll out!
• Great for Off-Road, Sand, Trail Riding or Anywhere you ride your RZR!
  OEM Part Number:

  1241084, 1240822, 2879520_14 15 16 17 18 19 20 21
  Interchange Part Number:

  2882234, PL-1014, 66-6006, NU-8519ST

Our crank seal upgrade kit is a preventative maintenance item designed to protect the crank seal from belt failure and silicone used while snorkeling a unit. There is no need to split the cases during this installation, which will save you time, money and the ride you are on if failure occurs on a ride. This kit replaces the Polaris OEM oil seal, part #: 3610176 and 3610284 (Seal-Flange,Lube Viton).

Polaris

• General 1000 - All years & models
• Ranger 900 - All years & models
• Ranger 1000 - All years & models
• RZR 900 - All years & models (Including Turbo Models)
• RZR 1000 - All years & models (Including Turbo Models)

• Retractable shoulder belts that allows more freedom of movement compared to other belts, and securely locks into place to provide superior safety.
• Fully adjustable to fit all size riders; easy to buckle and adjust, even while wearing your helmet and gloves.
• Secure restraint allows for better vehicle control and less ride fatigue.

This heatshield fits the 2019+ Maverick Trail or Sport, as well as the 21+ Commander. It attaches to the crossbar behind the seats with velcros (supplied) and has an easy-access (velcro) opening over the valve cover. Made of water-repellent solution-dyed material, padded with light-weight high-density foam and the reverse side is heat-reflective material.

This extension kit pushes yours Seizmik or Dragonfire mirrors out 2" so that you can see better when installing soft upper doors.  Kit includes two spacers, two bolts, and two washers.

New pigtail with blockouts - simply transfer your wires over.  Fits Wildcat trail, sports, and others

FITMENT:

2016-2021 Turbo RZR All Models

2018 Ranger XP 1000 Three Seater new body style

2019-21 Ranger XP 1000 Three seat and Crew

2018-21 RS-1

DENALI ATV/UTV Snow Plow Pulley Fairlead Kit is ready for snow! Designed specifically to resist wear from the steep angle that occurs between the winch and the plow, thus extending the life of your plow lift system.

Installation Instructions

https://youtu.be/qWDHnSY3Nuc

ALL YEARS MAVERICK TRAIL AND SPORT - 800 and 1000 ALL 2 door models

This seat fits properly in the trail and sport 2 seat versions of the Maverick 2019+

• 1 BUMP SEAT MADE OF BLACK VINYL
• 1 / 4 POINT HARNESS WITH SEWN IN HARNESS PAD AND CHEST BUCKLE (GREAT FOR KIDS)
• ALL MOUNTING HARDWARE - REMOVES WITH PINS TO ACCESS ENGINE PANEL

.

2-Slam latches

2-Heavy Duty Laser Cut Door Handle

4-Stainless Steel Button Head Screws

4-Nyloc Nuts

2-Sure-Loc Latch Pin with Nyloc Nut

When you demand more power from your machine you need somewhere to store that power. That's exactly what our battery tray is for.

Designed for rigidity and long lasting service it fits neatly and securely under the hood of your Talon. It also uses all existing holes in the frame so there is no need to cut or drill anything new.

FREE SHIPPING

That's right, these parking brakes are known as a "Spring Brake Thingy."  Each brake is made so simply and installs quicker than any other brake out there, and there are no parts to break or wear out.  Choose your model below for individual pricing:

.

Fits Can Am 2019+ Maverick Models (not X3) and 2021+ Commanders

FITS: 2014+ RZR 1000, 2015+ RZR 900, 2016+ RZR Turbo (all the way up to 2021 have been tested)

This kit allows you to go from H to R without accidentally going all the way forward to park.  This is similar to how the Rock and Trails Edition RZR works.  Kit includes the adapter plate, all necessary hardware including the shift arm and, and new cap with P-RNLH.  Great for plowing snow, hill climbing, and other activities that require forward to reverse consistently!

Watch the video below for demonstration.  Install takes less that an hour! RGS1Installation

Allows use of any aftermarket oil pressure sensor (1/8 NPT) right on the passenger side of the engine.  See pics for reference.  Works on any MOST RZR 900/1000/Turbo Motors.  Please put as much info in as possible so we can ensure to ship the correct item as there are two options possible.

[contact-form jetpackCRM='1'][contact-field label='Year/Make/Model' type='textarea'/][/contact-form]

one lock cylinder

two keys

Hook-up and fly in the dunes with the Sand Lite® from Tusk. These tires were designed to be lightweight and offer great floatation for maximum performance on the sand. Front tires feature a center ribbed design for excellent directional control. The rear features the perfect balance of paddle count, paddle height, stabilizing ribs, light weight, and flotation. The front and rear combine for quick accurate steering with a responsive and strong hook-up and drive.
• Center rib design for quick and accurate steering response.
• 3/4 inch tall paddles offer great hook-up and drive.
• Perfect balance of paddle count and paddle height for fun and exciting overall duning.
• 2 ply lightweight design.
• Optimal profile for awesome floatation on the sand.

***Comp cutting available!  Only to local pickup for $85/tire***

System 3 Offroad SB-4 Beadlock Wheels feature a lightweight design with bold style, at an incredible value.  Se chart below for part numbers.

SPECIFICATIONS

We are the largest distributor besides Hunterworks themselves.  Buy direct from us and save VS our eBay or Amazon stores, which we have to pay a portion of our profits to.  Support small business and buy direct below!

1-1/2" Inline tube connectors.

These fit both .095 &.120 wall tubing.

Includes 3/8" Socket Head bolts and nyloc nuts.

*Please note these are not for mounting your roll cage to factory mounting locations. (Meaning these will not connect to a manufactures OEM chassis mount bung.)Factory Polaris roll cages and other makes are 1 3/4" tube. These are designed to attach smaller components to your build-this saves weight. Have questions-shoot us a message !

This shift knob allows you to control the winch up and down while shifting all from one location.  Designed to be a plug and play with most Polaris Winches, it can be easily modified to fit any aftermarket setup.  This shift knob will fit ANY Polaris Side by Side we have tried including Rangers, Generals, 570s, 800s, 900s, 1000s, and Turbos.  Comes with two different caps so you can do a two or four button configuration allowing up, down, and side to side movement if you have a powered pivot on your plow. ONLY COMES WITH TWO BUTTONS - if you want to do a 4 button configuration, you must purchase two more buttons by clicking HERE.

Replace your lost or broken drain plugs on your Polaris.

Get back in the Race with the New STV® Can-am Maverick Belt Changing Tool. This Aluminum Belt Changing item is Rust-proof and durable.

This Belt Changing Tool was designed for the Can-Am Maverick Family, to make changing the belt super easy with no modifications. This will work with stock OEM clutches and most aftermarket clutches and helixes.

Fits all 2 door models RZRs including:

• 2015+ RZR 900
• 2014+ RZR 1000
• 2016+ RZR Turbo
• 2018+ Turbo S

Will also fit 4 models on the front ONLY.  Not currently available fore the rear.