Side by Side Outlet Parts and Accessories
Anytime you remove a panel on a Can Am, one of these seems to get lost in the skidplate, or down into some abyss. Order a spare to replace the next one!
This bracket allows you to run a Group ETX30LA Battery VS the standard ETX20L in your Can Am Maverick Trail or Sport! Bracket is made from steel, and then powdercoated black. OEM is Steel and black. BLEMISHED has cosmetic issues but functions well - our fab department made a mistake on a few.
ON BACKORDER - see similar product HERE
PUT AN END TO THE PROBLEM OF DUST AND DIRT IN YOUR ENGINE NOW! SAVE MONEY BY WASHING YOUR FILTER INSTEAD OF REPLACING IT!
REPLACES OE# 17215-HL6-A00
CAN AM CENTER CONSOLE HEAT SHIELD COVER for 2-Seater only!... w/ Removable Cup Insert for Easy Cleanup. Built with Next Gen Heat Reflective material- 99.0% Radiant Reflectivity! Easy install seatbelt slots. A heat reflective console cover made of water-repellent outer fabric, padded and lined with Next Gen Heat Reflective material. Attaches easily to the center console with velcro and grommets that utilize the existing console screws. The cup holder insert is easily removed for quick cleanup. Available in black only! Made in USA.
- Clamp on mounting for positive seal - Ends leaking/dust ingress around the seal.
- 47% Increase in dust holding over the OEM filter - Maximum power and extended service intervals
- 99.992 efficiency - Unmatched on ISO fine dust - Keeps the finest dust and silt out of your engine!
- Washable and Reusable - Super-tough, synthetic hybrid fiber structure specifically designed for a simple maintenance routine using compressed air or vacuum. Wash when needed. Last's for years, saving you money after a few uses!
- No Oiling - Just clean it, let it dry and roll out!
- Great for Off-Road, Sand, Trail Riding or Anywhere you ride your Polaris!
https://youtu.be/p2ZetJeiXUY
OEM Part Number:7081937, 7082115_15 16 17 18 19 20 21Interchange Part Number:PL-8715, 66-6002RWB, NU-8521ST
Details
- The Tusk UTV Seat Heater is the ideal accessory to add to your machine when riding in cold weather conditions. The seat heater panel fits under your seat cover and connects to your battery for easy installation. This heater includes a switch with High and Low heat settings to make it easy to set your comfort level. It would be a great addition to your cold weather rides and plowing snow with your UTV. Works on most UTV applications. When in need of parts and accessories for your dirt bike, ATV, or UTV, think TUSK!
- Tusk UTV Seat Heater is perfect for cold weather riding conditions.
- Switch includes High and Low heat settings for the ideal comfort level.
- Easily installs under the seat cover and connects to the battery of the machine.
- Works great for most UTV applications.
- 50 Watts
- Max Temp of 158 F (70C).
- Some drilling is required to install the switch.
- Sold Per Seat.
- Dimensions: 10.75"x18.5
- When out riding you want to make sure that you are seen by other riders. Mounting a flag to your machine gives other riders knowledge that you are on the dune hill, on the track or trail. Flags come in all different styles and designs. So get out and ride and have some fun, but make sure that you have the right tools like your flag.
- Durable aluminum construction.
- Black anodized.
- 1/2" Flag mounting hole.
- Mounts on vertical or horizontal roll cages.
- Mounts to machines with 1-¾" or 1-7/8" roll cage tubes.
- Extra heavy duty to support large flags or large LED whip flags.
- Adjustable in 15 degree increments.
- Includes all mounting hardware.
- Flag sold separately.
PUT AN END TO THE PROBLEM OF DUST AND DIRT IN YOUR ENGINE NOW! SAVE MONEY BY WASHING YOUR FILTER INSTEAD OF REPLACING IT!
REPLACES OE# 11013-0782
-Great for race and recreational applications. Make your bumpers/spare tire carriers/roof racks/doors and many other items bolt on !
FREE SHIPPING
Mudslinger® (AMS) provides a protective, non-stick layer of armor against the accumulation of mud, dirt and snow on ATVs, UTVs and dirt bikes. It makes removing mud and dirt with low-pressure water easy while protecting against UV rays and keeping equipment looking pristine.
Take maintenance into your own hands! These wheel bearing grease tools allow you to perform a simple task list to keep your wheel bearings operating at peak performance:
Remove the wheel, remove the caliper, and take off the axle bolt. Insert grease tool and pump with grease. Reverse and move to next wheel, it really is that simple!
Choose your size needed below.
.
- Clamp on mounting for positive seal - Ends leaking/dust ingress around the seal.
- 47% Increase in dust holding over the OEM filter - Maximum power and extended service intervals
- 99.992 efficiency - Unmatched on ISO fine dust - Keeps the finest dust and silt out of your engine!
- Washable and Reusable - Super-tough, synthetic hybrid fiber structure specifically designed for a simple maintenance routine using compressed air or vacuum. Wash when needed. Last's for years, saving you money after a two uses!
- No Oiling - Just clean it, let it dry and roll out!
- Great for Off-Road, Sand, Trail Riding or Anywhere you ride your RZR!
OEM Part Number:1241084, 1240822, 2879520_14 15 16 17 18 19 20 21Interchange Part Number:2882234, PL-1014, 66-6006, NU-8519ST
Our crank seal upgrade kit is a preventative maintenance item designed to protect the crank seal from belt failure and silicone used while snorkeling a unit. There is no need to split the cases during this installation, which will save you time, money and the ride you are on if failure occurs on a ride. This kit replaces the Polaris OEM oil seal, part #: 3610176 and 3610284 (Seal-Flange,Lube Viton).
Polaris
- General 1000 - All years & models
- Ranger 900 - All years & models
- Ranger 1000 - All years & models
- RZR 900 - All years & models (Including Turbo Models)
- RZR 1000 - All years & models (Including Turbo Models)
- Retractable shoulder belts that allows more freedom of movement compared to other belts, and securely locks into place to provide superior safety.
- Fully adjustable to fit all size riders; easy to buckle and adjust, even while wearing your helmet and gloves.
- Secure restraint allows for better vehicle control and less ride fatigue.
This heatshield fits the 2019+ Maverick Trail or Sport, as well as the 21+ Commander. It attaches to the crossbar behind the seats with velcros (supplied) and has an easy-access (velcro) opening over the valve cover. Made of water-repellent solution-dyed material, padded with light-weight high-density foam and the reverse side is heat-reflective material.
This extension kit pushes yours Seizmik or Dragonfire mirrors out 2" so that you can see better when installing soft upper doors. Kit includes two spacers, two bolts, and two washers.
New pigtail with blockouts - simply transfer your wires over. Fits Wildcat trail, sports, and others
FITMENT:
2016-2021 Turbo RZR All Models
2018 Ranger XP 1000 Three Seater new body style
2019-21 Ranger XP 1000 Three seat and Crew
2018-21 RS-1
DENALI ATV/UTV Snow Plow Pulley Fairlead Kit is ready for snow! Designed specifically to resist wear from the steep angle that occurs between the winch and the plow, thus extending the life of your plow lift system.
https://youtu.be/qWDHnSY3Nuc
ALL YEARS MAVERICK TRAIL AND SPORT - 800 and 1000 ALL 2 door models
This seat fits properly in the trail and sport 2 seat versions of the Maverick 2019+
- 1 BUMP SEAT MADE OF BLACK VINYL
- 1 / 4 POINT HARNESS WITH SEWN IN HARNESS PAD AND CHEST BUCKLE (GREAT FOR KIDS)
- ALL MOUNTING HARDWARE - REMOVES WITH PINS TO ACCESS ENGINE PANEL
.
2-Slam latches
2-Heavy Duty Laser Cut Door Handle
4-Stainless Steel Button Head Screws
4-Nyloc Nuts
2-Sure-Loc Latch Pin with Nyloc Nut
When you demand more power from your machine you need somewhere to store that power. That's exactly what our battery tray is for.
Designed for rigidity and long lasting service it fits neatly and securely under the hood of your Talon. It also uses all existing holes in the frame so there is no need to cut or drill anything new.
FREE SHIPPING
That's right, these parking brakes are known as a "Spring Brake Thingy." Each brake is made so simply and installs quicker than any other brake out there, and there are no parts to break or wear out. Choose your model below for individual pricing:
.
Fits Can Am 2019+ Maverick Models (not X3) and 2021+ Commanders
