Side by Side Outlet Parts and Accessories
-
- Rack Made from 1.5” Steel Tubing Powder Coated Tuff Coat Black
- Cargo Tray is made from Marine Grade High Strength Aluminum 18-3/4” deep x 52” Wide x 4” Tall (I.D.)
- The load capacity of the Upper Cargo Tray is 150lbs evenly distributed
- 72 Total Tie-Down Slots
- Can-Am Defender Storage Rack does not impede bed dump function (do not overload bed or Center of Gravity)
- Can-Am Defender Cargo Rack is Easy to Install and Remove “average time is 15 min”
- Made in the USA
- Includes all installation hardware “no drilling or modifying required”
- RBO Money Back Guaranteen
-
It is all about stealth with RIGIDs Midnight Edition LED […]
Our Stage 3+ Power Package blends power with durability, adding a wastegate that satisfies our highest performance standards. With this wastegate installed, you can hit consistent boost targets throughout the operating range of your 2017-2020 Polaris RZR XP Turbo.
If your stock Polaris can’t handle the heat you bring on the racetrack or out in the dunes, it’s time to step up to Stage 3+. With this Power Package, not only will you feel WHP gains up to 20, but the confidence to drop the hammer knowing that your engine can take it day after day.
The stock charge tube on your 2017-2020 Polaris RZR XP Turbo can’t keep up with racing demands. We’ve engineered a silicone charge tube (in signature Dynojet red) that can take the heat while providing cooler charge temps and faster acceleration. Our blowoff valve — made of long-lasting aluminum — doesn’t just sound great, it vents out efficiently for maximum power gains.
You can also customize your ride with Dynojet’s Power Vision 3 fuel tuner, which comes pre-loaded with tested performance tunes. After you’ve tuned your Polaris, you can leave it mounted as a full-color, high-contrast information panel delivering performance metrics.
Transmission Bearing Kit SANDCRAFT has created ALL NEW UTV Bearings […]
TRANSMISSION SEAL KIT If your machine is leaking oil from […]
From the factory the Textron Wildcat XX is a very capable off-road vehicle. As with most vehicles from the factory, there is always more performance that can be had by swapping out a restrictive stock exhaust. The new Agency Power exhaust and header system is designed and engineered as a complete unit to let the high performance three-cylinder engine breathe freely. The bellow flex tube header adds flow and power while the race-ready muffler gives a unique sound. The unique titanium burnt and polished exhaust tip adds style over all other standard Wildcat XX exhausts. This package is a perfect addition for any owner looking for style, high performance and sound.
The Agency Power Header for the Wildcat XX is made from T304 stainless steel mandrel bent tubes that have been precision TIG welded. The header has a flange made to bolt to the factory heads, a bung to re-install the factory O2 sensor along with a new V-band clamp to connect to the Agency Power exhaust muffler. The pipe diameters off the heads are quickly increased to 1 7/8” and then unite at a larger more robust collector. The use of a bellow flex tube after the collector allows for better flow and flexibility during acceleration and keeps the system from developing cracks over exceptionally rough terrain.
Designed to work exclusively with the AP header, the Agency Power muffler uses the factory exhaust mount locations to install for a direct bolt-on fit. The performance resonator muffler outlet has been designed with integrated spark arrestors into the exhaust tip. The polished and titanium exhaust tip gives a show finish to the rear end of the Wildcat XX. The machine now has an aggressive look with a satisfying sound.
The Agency Power header and exhaust also saves weight. The factory system tops out at 27lbs while the AP header and exhaust combo only weighs 21lbs. With this six pound savings, the sprung weight of the vehicle is reduced, making the job of the suspension easier.
In order to be sure of horsepower gain, the Textron Wildcat XX was run back to back on the dyno to keep all the variables the same except for the header and exhaust. On a UTV with a stock tune, the header and exhaust made a bolt-on gain of five horsepower. While this isn’t breaking any records, netting an additional five horsepower is tough to do on any modern UTV with a simple bolt-on exhaust and no modifications or tune. Overall, the header and exhaust is a great product to add as your first upgrade or during your build to improve power. The Agency Power Textron Wildcat XX Header and Exhaust Systems have been engineered to perfection!
***Exhausts are made here in our Arizona facility. Depending on demand we may have exhausts instock or it may take several weeks to fulfill orders. Please contact us if you have any time constraints.***
Features:
- Stainless Steel Constructions
- Precision TIG Welding
- Clean and Satisfying Sound
- Direct Bolt-On
- Weighs 21 lbs (6 lbs Less Than Factory)
- Spark Arrestor Integrated Into Tip
- Blued Titanium Tip
- Header, Muffler and Tip Included
- Bung For O2 Sensor
- Header Runners 1 7/8”
- Bellow Flex Tube
- Gain of 5 hp
- Dyno proven results
Notes:
- When Running a Spark Arrestor Screen Be Sure to Check On Them From Time to Time That They Are Free Flowing and Not Clogged Of Debris.
- Spark Arrestor Screens Will Need to Be Serviced Which Varies on Driving Conditions.
- View Installation Instructions Here
Fitment:
- 2018+ Textron Wildcat XX
Many situations require a highly portable, high-powered light source that […]
The E-Series is one of RIGIDs most versatile, all-around lighting […]
The SR-Series PRO LED Light Bars provide a sleek, low […]
The SR-Series PRO LED Light Bars provide a sleek, low […]
Each Kit Features:
- Direct bolt-on
- Significantly stronger than stock
- High-grade steel construction
- Boxed sheet metal design
- Heavy duty pivot bushings
- Replaces weak ball joints with uniballs
- Durable semi-gloss black powder coat
- Made in the USA
Each Kit Features:
- Direct bolt-on
- Significantly stronger than stock
- High-grade steel construction
- Boxed sheet metal design
- Heavy duty pivot bushings
- Replaces weak ball joints with uniballs
- Durable semi-gloss black powder coat
- Made in the USA
Our BOMBPROOF Front Differential rebuild package includes the Billet Torsion […]
Machined from heat-treated domestic materials, our Steel Sprague and Armature […]
The SR-Series PRO LED Light Bars provide a sleek, low […]
-
- Made in USA
- Made From 1.5” Diameter Steel Tubing
- Powder Coated Finish available in textured Black
- Tailgate can be Pad-Locked
- (3) “It Fits” ™ mounting locations for RBO accessories.
- Multiple Tiedown Points in the Top Rack so you can secure Cargo from every direction
- Mounts without Modifying your UTV using basic hand tools
- All Mounting Hardware included
- Maximum Combined Capacity of Cargo Rack 160 lbs. (Limited by Vehicle Capacity)
- Load Capacity of Top Rack is 60 lbs. (Limited by Vehicle Capacity)
- Load Capacity of Side Rack is 30 lbs. per side (Do Not Mount Spare Tires on Side Racks)
- MAX Tailgate Load Capacity is 40 lbs.*Spare tire should not exceed 40lbs. or 29″ in diameter.*
-
When you operate your UTV over 40 MPH you are […]
Bundle and save with the Polaris RZR Turbo Driveline and […]
BECAUSE OF THE VARIATIONS IN THESE MODELS, THIS DRIVELINE IS […]
Bundle and save with the RS1 Driveline Carrier Bearing Combo! […]
