Side by Side Outlet Parts and Accessories
This sleeve fits OVER your existing air filter OE number 1240434 for your RZR 800. Adds an additional layer of protection from larger debris while minimizing flow restriction. Great for keeping mud and leaves from clogging the filter media fins. Pairs well with the R2C Washable Air Filter for your RZR 800!
This sleeve fits OVER your existing air filter OE number 7081937 for your 2015+ Polaris 900 or 1000 Engines found in Trail Models, 900s, 1000s, and General. Adds an additional layer of protection from larger debris while minimizing flow restriction. Great for keeping mud and leaves from clogging the filter media fins. Pairs well with the R2C Washable Air Filter for you Polaris RZRr!
This sleeve fits OVER your existing air filter OE number 652091 for your Wildcat XX. Adds an additional layer of protection from larger debris while minimizing flow restriction. Great for keeping mud and leaves from clogging the filter media fins. Pairs well with the R2C Washable Air Filter for you Wildcat XX!
FITMENT
- Honda Talon 1000X : 2019+
- Honda Talon 1000R : 2019+
FEATURES
- Made of 1.75" x 1/16” wall steel DOM steel tubing
- Protects entire front end including bodywork and grille
- Rugged look matches your machine’s style
- Finished with UV-resistant powder coating
- Includes all hardware and instructions
- No drilling required
- Compatible with any winch mount sold here and any Viper Winch
FITMENT
- Honda Talon 1000R : 2019+
FEATURES
- 1.5" additional clearance
- 1.25" diameter steel tubing
- Chromoly steel pivot blocks and ball joint housings
- Stronger than OEM
- Pre-adjusted pivot blocks for easy install
- Includes bushing removal and insertion tool
- Backed by a lifetime warranty
FIRESTORM UTV In Cab Heater for CanAm Mavericks provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.
Fitment
- all FULL SIZE Can Am Maverick models 2016-2018 (not the new trail/sport models)
- Please Note: will NOT work with Maverick X3
FIRESTORM UTV In Cab Heater for CanAm Commanders provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.
Fitment
- 2013-2016 Commander models with OEM Power Steering (except LE)
- 2017 please call for fitment information
- Please Note: will NOT work with after market Power Steering
- will ONLY fit Commanders with steering shaft shown in figure. Call for more information
FIRESTORM UTV In Cab Heater for Kawasaki Teryxs provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.
Fitment
- 2008-2013 Kawasaki Teryx
- 2012-2013 Kawasaki Teryx 2-seater models
- Please Note: will NOT fit Kawasaki Teryx 4 models
FIRESTORM UTV In Cab Heater for Yamaha Rhinos provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.
Fitment
- 2006-2011 Yamaha Rhino 450
- 2003-2007 Yamaha Rhino 660
- 2008-2013 Yamaha Rhino 700
FIRESTORM UTV In Cab Heater provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.
HT_CP_400
- 2009-2014 Full Size Ranger models (not 900 models)
- 2010-2014 Full Size Ranger Crew models (not 900 models)
- 2010-2014 Mid Size 400/500 (without EPS)
- 2011-2014 Mid Size 570 (without EPS)
- 2010-2014 Mid Size 500/800 Crew
- 2016-2019 Full Size Ranger (Round Tube Roll Cage)
- Please Note: will NOT fit Ranger XP 900 models
- Please Note: will NOT fit Midsize Ranger 570 models with Power Steering
- Please Note: the defrost vents WILL interfere with the Polaris After Market Full Steel Cab Enclosure
- Please Note: 570s will not achieve full heat unless operating at 3000-4000 rpms
HT_CP_404
- 2013-2018 Ranger XP 900 models
FIRESTORM Compact Underhood Cab Heaters for Polaris RZRs provide the flexibility of using your UTV/SxS comfortably in subzero temperatures. Our complete kits are customized to include vehicle specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings and electrical connectors - No extra trips to the hardware store required.
Fitment
HT_CU_406-900
- 2015-2019 RZR 900 (50" & 60" frame)
- 2015-2019 RZR-4 900 (50" & 60" frame)
- Please Note: will NOT work with RZR 900 with Ride Command
- Please Note: will NOT work with the OEM wiper blade kit
HT_CU_406-1000
- 2014-2018 RZR XP 1000 (XP1K)
- 2014-2018 RZR-4 XP 1000 (XP1K)
- 2016-2018 RZR XP1000 (XP1K) Turbo
- 2016-2018 RZR-4 XP1000 (XP1K) Turbo
- Please Note: will NOT work with 2019 models
- Please Note: will NOT work with RZR 1000-s
- Please Note: will NOT work with RZR 1000 with Ride Command
- Please Note: will NOT work with the OEM wiper blade kit
Viper Elite Wide Spool UTV Winch - the Absolute TOP OF THE LINE UTV Winch!
The VIPER Elite Wide Spool UTV Winch is a durable winch for UTVs and Side by Sides. VIPER Elite wide spool winches also carry the official IP67 waterproof rating -- a claim not made by any other winch in the market. Manufactured in a ISO/TS 16949 Facility with military grade raw materials, it is a great winch for snowplowing and mudding with UTV and Side by Sides. The VIPER Elite Wide Spool has a sealed planetary metal gear train, a permanent magnet motor, automatic brake, and stainless-steel hardware. Flush mount dash switch, wireless remote switch and AmSteel®-Black synthetic rope are standard on this Elite winch.
*Mounts sold seperately. Search by your model, or click HERE for all mounts.
.
- Attaches to XP factory roll cage
- Fits Polaris® models ’14-’18 RZR® XP 1000, RZR® XP4 1000, RZR® 900, RZR® 4 900
- 4 Zippered storage compartments
- 2 main compartments with a removal divider to make one large compartment
- 2 end compartments with access from side of vehicle
- Top quality UV treated, water resistant Trimax Ballistic nylon with Fibertech accents
- Reflective piping for nighttime visibility
- Reverse coil zippers help keep out dust and dirt
- Rubber coated oversized zip pullers operate easily with gloves
- Includes our Lifetime Warranty
- Overall Dimensions: 41.5L x 8”W x 18”H
- Holds 58 liters (Main compartment)
This is an aftermarket door bag for your side by side. You must be able to access between the door skin and the door frame to attach this universal door bag platform. The platform is 12x16 inches and has eight 16 inch straps attached. Comes with a 2L hydration bladder.
*This universal door bag platform does not come as a pair. They are sold as SINGLES only and come with your choice of two pouch choices from the lists below. Prices vary based on pouch selection.
- UTV-100 mounts to the front or rear of most UTV roll cages
- Quickly and securely attaches with adjustable self-fastening webbing straps
- Adjustable webbing straps available at each end of the bag for optimized security
- Made from durable water-resistant UV treated Tri-Max polyester
- Padded and reinforced back panel helps keep bags shape when mounted
- Easy glide reverse coil zippers help protect from dust, dirt and moisture
- 7 convenient pockets, 2 with large mesh panels to view content
- Perfect for mobile devices, cameras, small tools and other personal effects
- Fits most UTV’s with roll cages
- Overall dimensions: 45”L x 7”H X 2”W
- Includes Nelson Rigg's exclusive Lifetime warranty
- LIFETIME WARRANTY
- Fits Can-Am Maverick X3 front factory doors
- UV-treated, water-resistant TriMax® fabric with Fibertech “carbon-like” accents
- Reverse coil zippered single storage compartment
- Rubber coated oversized zip pullers operate easily with gloves
- Dimensions: 24”L x 9W x 2.5”D
- Holds 7 liters per side, sold as set
- LIFETIME WARRANTY
- Mounts using rear factory door holes and supplied hardware
- UV-treated, water-resistant TriMax® fabric with Fibertech “carbon-like” accents
- Reverse coil zippers storage compartment
- Can work with optional Lower Door bags RG-001L
- Dimensions: 20.5”L x 11”W x 2”D
- Pocket size 10”L x 9”W x 2”D
- Fits Polaris models '14-'19 RZR XP4 1000 & Turbo, RZR 4 900
- Front knee pad for comfort and safety
- Holds 3 liters per side, sold as set
- Constructed of Ultra-Thick, Hard-Coated & Scratch Resistant ¼" Polycarbonate
- Features an adjustable sliding vent to allow air flow and reduce dust
- Extremely durable - clamps are custom injection molded
- Requires no tools to install or remove
- Super smooth edges
- Easy to install - NO Drilling required!
- Made from .236" Hard-Coated & abrasive-resistant GE Lexan MR10
- Opens 3" or 5 1/2" for increased ventilation
- Easy installation- no drilling required!
- Extremely durable custom nylon injected clamps
- All hardware (nuts & bolts) is stainless steel with a black-coated finish- no rust!!
- Comes complete with all mounting hardware & detailed instructions
- Compatible with most aftermarket roofs
- Trailerable***
- Premium 1/4" MR-10 Lexan material is Hard-Coated & Scratch-Resistant
- Approximate height from center of cowl is 8 7/8"
- Easy on/off quick connect flip clamps
- Rubber Gasket along bottom to protect hood
- Fits- 2019 Honda Talon 1000R & Talon 1000X
- Sold as a complete set of 4 (2 front & 2 rear)
- Made of black HMW haircell polyethylene .125”
- Cut with superior CNC 5-axis router…all edges are super-smooth.
- Custom bend design for maximum rigidity.
- Comes complete with all mounting hardware
- Some drilling required
New STV® Polaris RZR Turbo/S/RS1 Belt Changing Tool
Get back in the Race with the New STV® Polaris RZR Turbo/S/RS1 Belt Changing Tool. This Aluminum Belt Changing item is rust-proof and durable.
This Belt Changing Tool was designed for the Polaris RZR Turbo and RZR S 2016 – 2019 models and the Polaris RZR RS1 2018 & 2019 models, to make changing the belt super easy with no modifications. This will work with stock OEM clutches and most aftermarket clutches and helices.
Tired of that splined socket falling out of your standard socket when trying to take aftermarket wheels on or off your machine? We took the liberty of welding the splined socket into a 1/2" drive standard socket for you to make the entire process seamless.
2017 .5+ Polaris RZR (64″) 2017-2018 Turbo Billet high clearance radius rods.
2014 - 2016 Polaris RZR 1000 XP and 2016 TURBO (64″ wide)
Billet high clearance radius rods Direct Bolt-on Replacement
These Polaris RZR XP ball joints are crafted with an innovative design and are made to last. Using a 4340 heat treated Chromolly housing and a heat treated 17-4 stainless steel stud, these ball joints are fully rebuildable and adjustable.
These ball joints come fully assembled and ready to install. Unlike other rebuildable ball joints that must be taken apart to install and adjust, ours is as easy as pressing it in, tightening the nut, and you're good to go!
Direct Bolt-on Replacement Fits 2017 .5+ RZR 1000, 2017-2018 RZR Turbo. 2/4 Seat. 12mm Bolt
Can-Am Maverick X3 Rear Radius Rod Plate - Reinforces the rear chassis and adds strength to one of the weakest parts of the X3 Chassis.
Can-Am Maverick X3 Fixed Rear Sway Bar Links - One of the weak points in the Can-Am X3 is the stock front sway bar links. These rear sway bar end links are the perfect upgrade, constructed from Billet 6061 aluminum, Chromolly PTFE lined spherical bearings and 17-4 Stainless misalignment spacers.
Can-Am Maverick X3 Billet Shock Brace for ALL models.
2017 + Can-Am Maverick X3 RS Edition (72″) Steering Tie Rod Kit with heim ends. Complete steering upgrade for the Canam X3RS (72") Direct Bolt-on Replacement Available in machined finished or Type 3 Hard Black anodized
This steel faceplate replaces the stock plastic one, adding greater protection and style.
MILITARY-GRADE AIR FILTRATION
KEEPS THE AIR FILTER IN YOUR GENERAL CLEAN
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having to replace your air filter
MILITARY-GRADE AIR FILTRATION
KEEPS THE AIR FILTER IN YOUR RANGER CLEAN
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having to replace your air filter.
***Note: This kit will not fit models with Polaris Deluxe doors installed.***
***DISCONTINUED***
MILITARY-GRADE AIR FILTRATION
KEEPS THE AIR FILTER IN YOUR WILDCAT CLEAN
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having to replace your air filter.
