Side by Side Outlet Parts and Accessories
Allows one person to compress clutches for service work, remove and install helixes, change springs and maintenance
Allows one person to compress clutches for service work, remove and install helixes, change springs and maintenance
16" Blade 18" from the center for the handle to the end of the wiper You must drill a 1/2" hole in your windshield to mount it.
12" Blade, 15" from the center for the handle to the end of the wiper You must drill a 1/2" hole in your windshield to mount it.
- Universal 11" Manual wiper makes clearing your windshield much easier while riding.
- Mounting bracket holds the wiper from falling down when not in use.
40 amp relay harness
Complete plug and play
Comes with relay, fuse and switch.
Single ATP is a single harness to wire (1) light
Dual DT is a dual harness to wire (2) lights
Our Mini Single Row LED Bar is a small 1" tall housing allowing you to be able to mount it in a location that a regular single row bar may not fit.
Adjustable clamp on side mirror with built in Sidewinder LED pod. These mirrors emit a full 90° spread per side emitting 3600 lumens per light. The clamps are fully adjustable and will lock in place in the desired angle and will fit tubing sizes from 1.75" to 2" and anything in between.
These protective lens covers clip onto the light and change the light output to the corresponding color.
*Pods sold separately
These pods are intended for a "work light" application. Designed to project light in a complete 180 degree vertical pattern.
The combination of 5w Osram LED Chips and 4D Reflectors result in an extreme amount of light output. These pods also come with stainless steel dual mounting brackets. We suggest these pods for high speed applications
The combination of 5w Osram LED Chips and 4D Reflectors make these bars put out an extreme amount of light. These bars also come with stainless steel dual mounting brackets and military grade breathers. We suggest these bars for high speed applications as they put the light straight in front of you, not cast out to the sides as the G3D Pods HERE.
These have six forward facing LEDs and three on each side for a total of 12! Cover all 180º of your vision! Come with light only and a power/ground pigtail, no wiring harness.
Let's say you come up on a rollover where the driver is pinned down, fire has just started, and you want to help put out the flames and save a life.....do you really want to be figuring out how to get the extinguisher out of its mount? Pull here, but push this, and then release this strap....shoot the dirt got into the mechanism and now it wont release....FORGET THAT! This thing is dumby proof! Simply grab the red handle, push or pull, and the entire assembly comes off in your hand. That's right, you can do it with one hand! Easy, simple, effective.
This listing is for the Fire Extinguisher and the mount that holds it. To add the correct size quick release, see this link HERE.
The Goal of Graves when designing this X3 exhaust system was to provide the best performing, highest quality product on the market. We did not compromise in the development of this system. Material diameters, lengths, the silencer core size and length are optimized for maximum power output throughout the throttle and RPM range.
- 5 HP / 5 Torque Power Increase (slighly less with sound insert)
- Sounds reducing insert included in kit (USDF/USDA approved spark arrester. Approved).
- Fuel injection system tuning not required
- Exhaust System Saves 16.8 lbs. over stock setup. (Stock 24.4 lbs / Graves 7.6 lbs) 69% WEIGHT SAVINGS OVER STOCK SETUP!
- Graves Cat Back with Insert @ IDLE 90.5 / DB at 3500 RPM 94.7
- Graves Cat Back No Insert @ IDLE 91.5 / DB at 3500 RPM 97.5
- Stock @ IDLE 78.5 / DB at 3500 RPM 87.2
Headers designed for the maximum power output Single Lambda sensor comes standard Constructed from Aerospace grade hi heat Titanium alloys Advanced welding process showcases laser perfection welds Long Tapers with Precision fitment and "butt" welds Spigots designed to allow the headers to float free without leaks Flanges are made from 7075 hard anodized aluminum. Built to last!
Exhaust System Saves 14.7 lbs. over stock setup. 83 db at Idle / 96.5 db at 4000 rpm Fitment: Yamaha YXZ 1000r (All) 2016 - 2019
Includes 1 Year of Service No Contracts No Monthly Fees Unlimited Tracking Hardwired Geo Fence Alerts Any Weather Conditions Easy Installation Off Road & Marine —Back-up Battery———— Tilt Alerts US, Mexico and Canada 4G Network 2.5 x 3.125 x 0.875 Only $20 Yearly Renewals
IN STOCK and ready to ship. Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl. For two seat models CLICK HERE.
We also carry the Polaris OEM upper doors HERE that don't require a zip/unzip.
Local Pickup Only
This is a full glass windshield – laminated 1/4 safety glass that is DOT approved (not stamped) surrounded my a sturdy steel frame. The bottom portion of each side flips open to allow air to flow underneath.
BUILT IN USA!
This is a full glass windshield - laminated 1/4 safety glass that is DOT approved (not stamped) surrounded my a sturdy steel frame. The bottom portion of each side flips open to allow air to flow underneath. BUILT IN USA!
IN STOCK and ready to ship. Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl. For four seat models CLICK HERE
Our Soft Door Kit is made from the finest marine grade material on the market. Hook and loop attachment, heavy duty snaps, marine grade zippers and vinyl.,
- Fits: 2011-14 RZR 800, 2011-2014 RZR-S 800, 2011-2014 RZR XP900 and 2012-2018 RZR 570
- DOES NOT FIT: 2008-10 RZR, see this one instead.
Now, you can install a full size battery in your RZR. Fits under the drivers seat and replaces the small stock battery. Hold either a full size Optima or an Odyssey PC925 (Length 9-7/8 x Width 7-1/8 x High 6-1/2). Comes with two straps to secure either size battery. Also, comes with lugs to convert a battery lug to a marine type terminal.
Pictured with an Optima 34/78-980 Red top and an Odyssey PC925 (battery not included).
Simple to install! Let this battery isolator take the worry from your mind by making sure you primary battery always has power! Wire all you accessories into the secondary battery and you will never again be left stranded with a machine that won't start! We have personally tested these TrueAm products for tens of thousands of offroad miles, and they keep on performing!
Convex Mirrors offer a custom billet look while working better than any mirror on the market. The low profile billet clamps will not interfere with most windshields. The extended reach design gets the mirror out far enough so you can actually see what is behind you. The slight convex glass design offers a wide view without over distorting the view. Mirrors will breakaway forward and backward to help prevent damage in case of contact with stationary objects.
*sold as pair
Made from powder coated 1/8" (.125) thick aluminum that will protect you from the elements for many years! Our Fast Back roofs have a low profile that only increase the height of the RZR by about 1/4". They also have a long rear spoiler that gives a fast back look as well as addition protection for passengers.
*Installs over stock plastic visor. Will work with any windshield that will fit on a stock machine (including fold down windshields).
Fits:
2014+ RZR XP4 1000
2015+ RZR 900 4
2016+ RZR XP TURBO 4 Seater
Made from powder coated 1/8" (.125) thick aluminum that will protect you from the elements for many years! Our Fast Back roofs have a low profile that only increase the height of the RZR by about 1/4". They also have a long rear spoiler that gives a fast back look as well as addition protection.
Sunroof is made from dark tint polycarbonate that will not break.
Fits:
2014+ RZR XP 1000 2 Seat 2016+ RZR XP TURBO 2 Seat Fits RZR 900 and 1000 S 2 Seat models if you leave the back spoiler piece off.
CLICKER HERE FOR 4 SEAT MODELS
.
