Side by Side Outlet Parts and Accessories

This sleeve fits OVER your existing air filter OE number 7081937 for your 2015+ Polaris 900 or 1000 Engines found in Trail Models, 900s, 1000s, and General.  Adds an additional layer of protection from larger debris while minimizing flow restriction.  Great for keeping mud and leaves from clogging the filter media fins.  Pairs well with the R2C Washable Air Filter for you Polaris RZRr!

This sleeve fits OVER your existing air filter OE number 1240822 for your RZR 1000 XP.  Adds an additional layer of protection from larger debris while minimizing flow restriction.  Great for keeping mud and leaves from clogging the filter media fins.  Pairs well with the R2C Washable Air Filter for your RZR 1000 XP!

This sleeve fits OVER your existing air filter OE number 652091 for your Wildcat XX.  Adds an additional layer of protection from larger debris while minimizing flow restriction.  Great for keeping mud and leaves from clogging the filter media fins.  Pairs well with the R2C Washable Air Filter for you Wildcat XX!

This sleeve fits OVER your existing air filter OE number 7082265 for your 2018+ Polaris Ranger 1000.  Adds an additional layer of protection from larger debris while minimizing flow restriction.  Great for keeping mud and leaves from clogging the filter media fins.  Pairs well with the R2C Washable Air Filter for you Polaris Ranger!

Product Description

• Clamp on mounting for positive seal - Ends leaking/dust ingress around the seal.
• 47% Increase in dust holding over the OEM filter - Maximum power and extended service intervals
• 99.992 efficiency - Unmatched on ISO fine dust - Keeps the finest dust and silt out of your engine!
• Washable and Reusable - Super-tough, synthetic hybrid fiber structure specifically designed for a simple maintenance routine using compressed air or vacuum.  Wash when needed. Last's for years, saving you money after a few uses!
• No Oiling - Just clean it, let it dry and roll out!
• Great for Off-Road, Sand, Trail Riding or Anywhere you ride your RZR!

PUT AN END TO THE PROBLEM OF DUST AND DIRT IN YOUR ENGINE NOW! SAVE MONEY BY WASHING YOUR FILTER INSTEAD OF REPLACING IT!

REPLACES OE# 707800371

NO LONGER IS THERE A NEED TO RISK DUST AND DIRT ENTERING AND DAMAGING YOUR RANGER'S ENGINE! SAVE MONEY BY WASHING YOUR FILTER INSTEAD OF REPLACING IT!

Fits 2018+ Ranger 1000 XP, Replaces 7082265

NO LONGER IS THERE A NEED TO RISK DUST AND DIRT ENTERING AND DAMAGING YOUR WILDCAT ENGINE! SAVE MONEY BY WASHING YOUR FILTER INSTEAD OF REPLACING IT!

Fits all Wildcat XX, replaces OE 652091

Firestorm Thermostat Bypass Valves route a constant flow of hot coolant through the heater core. This provides consistent heat to the cab interior and operates most like an automotive heating system.

Models listed down the page in description.

Firestorm Thermostat Bypass Valves route a constant flow of hot coolant through the heater core. This provides consistent heat to the cab interior and operates most like an automotive heating system.

Models number fitment listed below.

FIRESTORM UTV In Cab Heater for Arctic Cats provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.

Fitment

• Prowler 550/700
• Please Note: will NOT work with Prowler 700 with factory console

FIRESTORM UTV In Cab Heater for CanAm Mavericks provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.

Fitment

• all FULL SIZE Can Am Maverick models 2016-2018 (not the new trail/sport models)
• Please Note: will NOT work with Maverick X3

FIRESTORM UTV In Cab Heater for CanAm Commanders provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.

Fitment

• 2013-2016 Commander models with OEM Power Steering (except LE)
• 2017 please call for fitment information
• Please Note: will NOT work with after market Power Steering
• will ONLY fit Commanders with steering shaft shown in figure. Call for more information

FIRESTORM UTV In Cab Heater for Kawasaki Teryxs provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.

Fitment

• 2008-2013 Kawasaki Teryx
• 2012-2013 Kawasaki Teryx 2-seater models
• Please Note: will NOT fit Kawasaki Teryx 4 models

FIRESTORM UTV In Cab Heater for Yamaha Vikings provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.

Fitment

• all Viking models

FIRESTORM UTV In Cab Heater for Yamaha Rhinos provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.

Fitment

• 2006-2011 Yamaha Rhino 450
• 2003-2007 Yamaha Rhino 660
• 2008-2013 Yamaha Rhino 700

Fitment:

HT_CP-402:

• 2008-2014 RZR
• 2008-2014 RZR-S
• 2010-2014 RZR-4
• 2012-2014 RZR 570
• 2008-2014 RZR 800
• 2011-2014 RZR XP 900

• Please Note: will NOT work with RZRs with EPS (Electric Power Steering)
• Please Note: RZR 570 will not achieve full heat unless operating at 3000-4000 rpms

HT_CP-402EPS:

• 2008-2014 RZR (Electric Power Steering)
• 2008-2014 RZR-S (Electric Power Steering)
• 2010-2014 RZR-4 (Electric Power Steering)
• 2012-2014 RZR 570 EPS (Electric Power Steering)
• 2008-2014 RZR 800 EPS (Electric Power Steering)
• 2011-2014 RZR XP 900 EPS (Electric Power Steering)

• Please Note: 570 RZR will not achieve full heat unless you are operating at 3000-4000 rpms

HT_CP-406:

• 2014-2018 RZR 1000
• 2014-2018 RZR 1000 S
• 2014-2018 RZR 1000 XP
• 2014-2018 RZR 1000 XP 4
• 2014-2018 RZR XP Turbo
• Please Note: will NOT fit 2014-2018 RZR XP Turbo S

FIRESTORM UTV In Cab Heater provide the flexibility of using your UTV comfortably in subzero temperatures. Windshields stay clear of frost and cab enclosures stay toasty warm. These complete heater kits are customized to include vehicle UTV specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings, electrical connectors and accessories - No extra trips to the hardware store required.

HT_CP_400

• 2009-2014 Full Size Ranger models (not 900 models)
• 2010-2014 Full Size Ranger Crew models (not 900 models)

• 2010-2014 Mid Size 400/500 (without EPS)
• 2011-2014 Mid Size 570 (without EPS)
• 2010-2014 Mid Size 500/800 Crew

• 2016-2019 Full Size Ranger (Round Tube Roll Cage)

• Please Note: will NOT fit Ranger XP 900 models
• Please Note: will NOT fit Midsize Ranger 570 models with Power Steering
• Please Note: the defrost vents WILL interfere with the Polaris After Market Full Steel Cab Enclosure
• Please Note: 570s will not achieve full heat unless operating at 3000-4000 rpms

HT_CP_404

• 2013-2018 Ranger XP 900 models

FIRESTORM Compact Underhood Cab Heaters by MotoAlliance provide the flexibility of using your UTV/SxS comfortably in subzero temperatures. Our complete kits are customized to include vehicle specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings and electrical connectors - No extra trips to the hardware store required.

FITMENT

• All Honda Pioneer 1000 models

FIRESTORM Compact Underhood Cab Heaters for Polaris RZRs provide the flexibility of using your UTV/SxS comfortably in subzero temperatures. Our complete kits are customized to include vehicle specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings and electrical connectors - No extra trips to the hardware store required.

Fitment

HT_CU_406-900

• 2015-2019 RZR     900 (50" & 60" frame)
• 2015-2019 RZR-4 900 (50" & 60" frame)
• Please Note: will NOT work with RZR 900 with Ride Command
• Please Note: will NOT work with the OEM wiper blade kit

HT_CU_406-1000

• 2014-2018 RZR    XP 1000 (XP1K)
• 2014-2018 RZR-4 XP 1000 (XP1K)
• 2016-2018 RZR    XP1000 (XP1K) Turbo
• 2016-2018 RZR-4 XP1000 (XP1K) Turbo
• Please Note: will NOT work with 2019 models
• Please Note: will NOT work with RZR 1000-s
• Please Note: will NOT work with RZR 1000 with Ride Command
• Please Note: will NOT work with the OEM wiper blade kit

FIRESTORM Compact Underhood Cab Heaters for Polaris Rangers provide the flexibility of using your UTV/SxS comfortably in subzero temperatures. Our complete kits are customized to include vehicle specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings and electrical connectors - No extra trips to the hardware store required.

Fitment:

HT_CU_403 • 2017-2019 Ranger 500 • 2015           Ranger 570 Midsize • 2017-2019 Ranger 570 Midsize • 2015-2019 Ranger 570 Midsize Crew • 2015-2016 Ranger ETX

HT_CU_404 • 2013-2019 Ranger XP 900 • 2013-2019 Ranger XP 900 Crew • 2017-2019 Ranger XP 1000 • 2017-2019 Ranger XP 1000 Crew

HT_CU_404-570 • 2015-2016 Ranger 570 Full Size • Please Note: will NOT fit 2017 Ranger 570

Viper Elite Wide Spool UTV Winch - the Absolute TOP OF THE LINE UTV Winch!

The VIPER Elite Wide Spool UTV Winch is a durable winch for UTVs and Side by Sides. VIPER Elite wide spool winches also carry the official IP67 waterproof rating -- a claim not made by any other winch in the market. Manufactured in a ISO/TS 16949 Facility with military grade raw materials, it is a great winch for snowplowing and mudding with UTV and Side by Sides. The VIPER Elite Wide Spool has a sealed planetary metal gear train, a permanent magnet motor, automatic brake, and stainless-steel hardware. Flush mount dash switch, wireless remote switch and AmSteel®-Black synthetic rope are standard on this Elite winch.

*Mounts sold seperately.  Search by your model, or click HERE for all mounts.

.

Viper Elite Winch - the Absolute TOP OF THE LINE UTV Winch!

The VIPER Elite ATV/UTV Winch is a durable winch for ATV, UTVs and Side by Sides. VIPER Elite winches also carry the official IP67 waterproof rating -- a claim not made by any other winch in the market. Manufactured in a ISO/TS 16949 Facility with military grade raw materials, it is a great winch for snowplowing and mudding with ATV and UTVs. The VIPER Elite has a sealed planetary metal gear train, a permanent magnet motor, automatic brake, and stainless-steel hardware. Wireless remote switch and AmSteel®-Black synthetic rope are standard on this Elite winch.

*Machine Specific Winch Mount Sold Separately.  Search by your model, or click HERE for all mounts.

*Widespool is a must on most Can Ams due to mounting holes.

• Attaches to XP factory roll cage
• Fits Polaris^® models ’14-’18 RZR^® XP 1000, RZR^® XP4 1000, RZR^® 900, RZR^® 4 900
• 4 Zippered storage compartments
• 2 main compartments with a removal divider to make one large compartment
• 2 end compartments with access from side of vehicle
• Top quality UV treated, water resistant Trimax Ballistic nylon with Fibertech accents
• Reflective piping for nighttime visibility
• Reverse coil zippers help keep out dust and dirt
• Rubber coated oversized zip pullers operate easily with gloves
• Includes our Lifetime Warranty
• Overall Dimensions:  41.5L  x 8”W x 18”H
• Holds 58 liters (Main compartment)

This is an aftermarket door bag for your side by side. You must be able to access between the door skin and the door frame to attach this universal door bag platform. The platform is 12x16 inches and has eight 16 inch straps attached. Comes with a 2L hydration bladder.

*This universal door bag platform does not come as a pair. They are sold as SINGLES only and come with your choice of two pouch choices from the lists below.  Prices vary based on pouch selection.

**2015+ RZR 900 Trails are not an exact fit, but can be installed with short, self tapping screws.

This door bag platform comes with 4 pouches included in the loaded kit. Choose your flag color in the drop down option, one flag patch included.

Pouches included are:

1- Tear Away First Aid Pouch

2- Small Utility Pouch (w/ flag)

3- Multi-Purpose Utility Pouch

4-Your Choice (gun holster, radio pouch, or cell phone pouch)