Side by Side Outlet Parts and Accessories
These Polaris RZR XP ball joints are crafted with an innovative design and are made to last. Using a 4340 heat treated Chromolly housing and a heat treated 17-4 stainless steel stud, these ball joints are fully rebuildable and adjustable.
Our ball joints come fully assembled and ready to install. Unlike other rebuildable ball joints that must be taken apart to install and adjust, ours is as easy as pressing it in and tightening the nut and you're good to go!
Fitment (Upper and Lower):
- 2014+ RZR XP 1000 (lower and upper)
- 16-18 RZR XP Turbo (lower and upper)
Please allow a 2-4 shipping due to high demand. Your heat shield will ship ground UPS due to the size and weight.
The Wolfsnout® UTV Back Seat Heat Shield is a fantastic product that significantly reduces heat and dust produced by the engine and dirt trails.
This kit greatly reduces cab heat by insulating, deflecting and sealing hot air entry. This kit comes with what you need to keep the hot air from blowing in from under the dash as well as deflecting hot air from the radiator at the drive line cover.
This filter clamps on for a more secure connection than the stock slip on air filter. Desertcraft has developed this filter for severe duty. This filter comes with an optional bracket to better secure and support the filter in the air box. The Desertcraft filter meets or exceeds in every category over the competition in this segment and it has the advantage of being serviceable. You will definitely save in the long run over one time use, throwaway filters. The specialty filter media is highly durable and has an efficiency rating that far exceeds the stock element (exceeds %). TheDesertcraft filter is a dry element that requires no special cleaner or oil to service. It is serviceable !!!! ?To service the filter you simply blow it out from the clean side with compressed air or vacuum from the dirty side. The filter can be soaked in a soapy solution rinsed and air dried too.
- 155L of storage spaces
- fits perfectly into the bed of the KRX
- rubber seal on lid prevents dirt and water from intruding inside
- rubber straps ensure lid stays on tight
"backorder" on this item means there is a wait list. Generally 6-8 weeks. Order now to get in line!
- USES OEM FUEL PUMP AND CAP
- COMES WITH NEW FUEL PUMP MOUNT HARDWARE
- AVAILABLE IN NATURAL COLOR (FUEL LEVEL VISIBLE)
- FUEL PUMP NOT INCLUDED
-
- IN STOCK READY TO SHIP
- The Ruff Rider UTV &; Side X Side Dog Pad is Padded to give your pet the ultimate ride.
- Helps keep animals, coolers, and just about everything else cooler when in the bed of your Side X Side.
- The bottom of our Ruff Rider Pet Pad uses our Heat Shield Deflection System comprised of a Thermal Fabric, that meets Military spec for constant operation under high temperature.
- Helps to lower temperature from machine to your pet by up to 50 Degrees.
- Reduces noise and pads items from bouncing around when on the trail.
- Top Pad is made from 1000 Denier Cordura® Fabric that is extremely durable.
- Rip and Tear Resistant as well as Mold and Mildew Resistant.
- Stain and soil resistant that is easy to clean with water and light detergent. (Air Dry)
- Made in The USA
-
-
- IN STOCK READY TO SHIP
- The Ruff Rider UTV &; Side X Side Dog Pad is Padded to give your pet the ultimate ride.
- Helps keep animals, coolers, and just about everything else cooler when in the bed of your Side X Side.
- Helps to lower temperature from machine to your pet by up to 50 Degrees.
- Reduces noise and pads items from bouncing around when on the trail.
- Pad is made from 1000 Denier Cordura® Fabric that is extremely durable.
- Rip and Tear Resistant as well as Mold and Mildew Resistant.
- Stain and soil resistant that is easy to clean with water and light detergent. (Air Dry)
- Made in The USA
- Comes with the RBO Money Back Guarantee.
-
- Made in USA
- Made from 3/16” Steel Powder Coated Finish
- Angled Design
- Adjustable to fit most tires
- Includes both 10mm and 12mm Hardware kits
- Mounts directly to any RBO Rack with the “It Fits™” Icon
- For Racks with a Tailgate the Load Capacity of the tailgate is 40 lbs. (Limited by Vehicle Capacity) *Spare tire should not exceed 40lbs. or 28″ in diameter.*
- All Mounting Hardware included
- Quick release system for an effortless installation and removal process.
- Internal mounting system with lockable latches for added security
- D rings to secure external cargo
- Molded inserts for buggy whip flags
- Can accommodate a full 5-gallon pail, most portable generators and oversized coolers
AR-15 vehicle scabbard for 14" and 16" AR-15 and M4 rifles. This is a hard case designed for quick access to your AR (with attachments) and 2 extra magazines.
Make a statement with these Metal Valve Caps! Adds that finishing touch to really make your ride stand out!
*to qualify for free shipping, orders must be over $35 in merchandise from the site
Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.
Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.
The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.
Feautures:
- Spacers are 2-inches wide each
- 4x156 - M12x1.5 - 131mm hub bore
- Improves overall handling of your machine
- Increases the track width
- Provides more aggressive offset and stance
- Durable and light-weight aluminum construction
- Steel lug studs prevent seizing of lug nuts
- CNC machined for precision fitment
- Limited One-Year Warranty
Fitment:
- Polaris RZR 1000 (all)
- Polaris RZR 900 / S / XC 2015+
- Polaris RZR XP Turbo
- Polaris Ranger 900 (all)
- Polaris Ranger 1000 (all)
- Polaris General 1000 (all)
- Kawasaki Mule Pro (all)
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
Fits the following models with the Ride Command dashboard:
- 15-20 RZR 900
- 14-18 RZR 1000
- 16-18 RZR Turbo
The innovative Honda Talon dual battery kit’s ease of installation, as well as the ability to “piggy-back” off the carrier’s main battery without ignition “tapping,” ensures that the original wiring will not be compromised.
Honda Talon Second Battery Kit’s Features
- Fast and easy Installation
- No complicated ignition wiring
- Fully automatic connection and isolation
- Product comes with full 1 year warranty
- Plug-in port for remote monitoring
- Protection from short-circuiting
- Protection from battery removal and damage
- Low loss solenoid
- Protection from overloading of the alternator
- Simple installation on any model Honda Talon Side by Side (SxS) (UTV).
Details
- Improves the sealing of the half doors to help better protect you from the elements and provides additional cabin comfort.
- Kit does BOTH doors.
Features: -Allows you to change the clutch weights easily with clutch in car. -Primary clutch removal/Install. -Dissemble/assemble primary clutch for service or to modify. -Remove secondary clutch. -Dissemble secondary clutch for service/modify.
Details
DENALI Commercial Grade Snow Plow Markers are necessary for seeing the edge of plow blades.Features
- Stainless steel base
- Flexible to -50° F
- Highly visible orange color
- Includes hardware
- Quantity of 2
- Please Note: DENALI Plow Flags are only compatible with DENALI Standard and Pro Series Snow Plow Blades
Fits the Honda Pioneer 1000 only.
A heat reflective under seat cover made of water-repellent outer fabric, padded and lined with Next Gen Heat Reflive material that deflects 95% of heat that comes from under the seats. Attaches easily under both seat with 5 cutouts for seatbelt strappings.
Made in USA.
Allows use of the 4 button configuration on the shifter know found HERE. Now you can control your plow up, down, left, and right all from one location (if equipped with power assisted blade).
Use this handy wire tap to get power from your brake lights! Will give you a keyed power, ground, and then a brake light power. Us it to run whips, a third brake light, license plate light, or anything else you can think of. Simply tape off or cut the wire you don't need from this handy harness. Check picture carefully for pin configuration, some models MAY vary. Fits all Can Am X3/Maverick Trail&Sport, and the new Commander models, may fit others as well, just see plug end to see if it matches.
Fits Kubota RTV 900 (2004-2011)
Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to direct the heat were you need it. The heater features a three speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with Y connectors which connect directly to the engines cooling system. The kit comes with templates, mounting brackets, hoses, nylon Y fittings, built in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more. Our MaxStat option not required for this heater.
