Side by Side Outlet Parts and Accessories
FITMENT
- 2014-21 XP and XP4 1000 All models
- 2016-2021 1000S All Models
*Requires Install of White Primary Washer, see video below
https://youtu.be/T_YVvOGNixU
We are the largest distributor besides Hunterworks themselves. Buy direct from us and save VS our eBay or Amazon stores, which we have to pay a portion of our profits to. Support small business and buy direct below!
IN STOCK, READY TO SHIP
- 2015-2021 RZR 900 All Models,
- 2013-2019 Ranger 900 All models
- 2016-21 General 1000 All Models
- 2020 Generals except the new XP, it uses the STD Belt HW-921K
- 2017 Ranger XP 1000 All models
- 2018 Ranger Crew XP1000 (not same as 2018 Ranger 1000 3 seater)
Fitment
- 2017-2021 Can-Am Defender H8 and HD10
Best BRP Belt on the Market!!!
- Made in the USA - Hunterworks belts are Made in the USA. These belts are engineered to meet or exceed OE standards.
- Long Service Life - Made from a proprietary construction application, these drop-in belts require no clutching adjustments and have a minimal stretch effect under load for consistent shifting
- 1% Warranty Rate - These belts can sport the title of having a less than 1% failure rate! That's because these belts are purpose-built to handle the unique demands of harsh CVT applications
- Huge Compatibility - Don't quote us, but BRP uses the same dimensioned belt on a ton of vehicles. It pretty much covers everything from a 800cc UTV to the Maverick X3. So what HW did was take BRP's OE dimensions, use their proven construction technique and make these belts.
- Common Sense 1 Year Warranty - We'll get down to what the warranty covers; As long as you didn't purposely try to blow your belt up, install it on the wrong UTV, install it incorrectly or have other clutch issues, we will replace the belt with a new belt. In the end these belts cost less money than the OEM belts and have a warranty where the OEM does not.
Fitment
- 2017-2021 Can-Am Maverick Trail and sport models 800/1000
Best BRP Belt on the Market!!!
- Made in the USA - Hunterworks belts are Made in the USA. These belts are engineered to meet or exceed OE standards.
- Long Service Life - Made from a proprietary construction application, these drop-in belts require no clutching adjustments and have a minimal stretch effect under load for consistent shifting
- 1% Warranty Rate - These belts can sport the title of having a less than 1% failure rate! That's because these belts are purpose-built to handle the unique demands of harsh CVT applications
- Huge Compatibility - Don't quote us, but BRP uses the same dimensioned belt on a ton of vehicles. It pretty much covers everything from a 800cc UTV to the Maverick X3. So what HW did was take BRP's OE dimensions, use their proven construction technique and make these belts.
- Common Sense 1 Year Warranty - We'll get down to what the warranty covers; As long as you didn't purposely try to blow your belt up, install it on the wrong UTV, install it incorrectly or have other clutch issues, Hunterworks will replace the belt with a new belt if oyu contact them directly. In the end these belts cost less money than the OEM belts and have a warranty where the OEM does not.
Fitment
- 2017-2022 Can-Am Maverick X3 | X3 Max
Best BRP Belt on the Market!!!
- Made in the USA - Hunterworks belts are Made in the USA. These belts are engineered to meet or exceed OE standards.
- Long Service Life - Made from a proprietary construction application, these drop-in belts require no clutching adjustments and have a minimal stretch effect under load for consistent shifting
- 1% Warranty Rate - These belts can sport the title of having a less than 1% failure rate! That's because these belts are purpose-built to handle the unique demands of harsh CVT applications
- Huge Compatibility - Don't quote us, but BRP uses the same dimensioned belt on a ton of vehicles. It pretty much covers everything from a 800cc UTV to the Maverick X3. So what HW did was take BRP's OE dimensions, use their proven construction technique and make these belts.
- Common Sense 1 Year Warranty - We'll get down to what the warranty covers; As long as you didn't purposely try to blow your belt up, install it on the wrong UTV, install it incorrectly or have other clutch issues, we will replace the belt with a new belt. In the end these belts cost less money than the OEM belts and have a warranty trough Hunterworks where the OEM does not.
- Made in the USA
- Compares to the S Dimensioned Belt 3211162
- Engineered for toughness and strength
- Proprietary construction
- Fits all 2008-14 RZR 800 All Models
- Fits All 2010-2014 Ranger 800 All Models
- MOUNT YOUR FLAG - Quick release flag mounting kit fits your Polaris RANGER or GENERAL by GripPRO ATV Anchors. Fits 1-7/16" Lock & Ride holes.
- NO TOOLS NEEDED - Super tight grip is achieved with our Best-Selling tie down anchor.
- FAST & EASY - Have your flag on or off in seconds. DOES NOT FIT RZR with 1" hole - see our RZR-fitting kits.
- VERSATILE - Mount in any of the rear platform / bed holes. Move as desired.
- DURABLE - Made of Stainless Steel components in the USA! LIFETIME WARRANTY.
- MOUNT YOUR FLAG - Quick release flag mounting kit fits your Polaris RZR, Sportsman or ACE by GripPRO ATV Anchors. Fits 1" Lock & Ride holes.
- NO TOOLS NEEDED - Super tight grip is achieved with our Best-Selling tie down anchor.
- FAST & EASY - Have your flag on or off in seconds. DOES NOT FIT RANGER with 1-7/16" holes. See our Ranger kit.
- VERSATILE - Mount in any of the rear platform / bed holes.
- DURABLE - Made of Stainless Steel components in the USA! LIFETIME WARRANTY.
FEATURES RIBBED EPDM rubber anchor expands evenly and holds better than other style anchors. MOUNTS quickly and easily on your Polaris RZR (Razor), Sportsman or Ace ATV with 1 inch hole in the cargo rack or bed. HAUL all your hunting, fishing, recreational or work gear securely. MADE with American Made products, 316 Stainless Steel and Heavy Zinc plated hardware for the ultimate in corrosion resistance. LIFETIME WARRANTY against failure and Hand-assembled and packaged in the USA! EACH set includes: Four (4): 5/16" x 2 3/4" long SS Bolt with 1-3/4" diameter Star Knob Fasteners made by GripPRO ATV Anchors.
Please verify your ATV or UTV has a 1" hole before placing order. See our other products for expansion anchors that fit the Ranger or General.
FEATURES RIBBED EPDM rubber anchor expands evenly and holds much better than other anchors. MOUNTS quickly and easily on your Polaris Ranger or General with 1-7/16" inch hole in the cargo rack or bed. HAUL all your hunting, fishing, recreational or work gear securely. MADE with American Made products, 316 Stainless Steel and Heavy Zinc plated hardware for the ultimate in corrosion resistance. LIFETIME WARRANTY against failure and Hand-assembled and Packaged in the USA! EACH set includes: Four (4): 5/16" x 3 1/4" Eye Bolt Fasteners made by GripPRO ATV Anchors.
Please verify your ATV or UTV has a 1 7/16" hole before placing order. See our other products for expansion anchors that fit other models with smaller holes.
FEATURES RIBBED EPDM rubber anchor expands evenly and holds much better than other anchors. MOUNTS quickly and easily on your Polaris Ranger or General with 1-7/16" inch hole in the cargo rack or bed. HAUL all your hunting, fishing, recreational or work gear securely. MADE with American Made products, 316 Stainless Steel and Heavy Zinc plated hardware for the ultimate in corrosion resistance. LIFETIME WARRANTY against failure and Hand-assembled and Packaged in the USA! EACH set includes: Four (4): 5/16" x 3 1/4" Eye Bolt Fasteners made by GripPRO ATV Anchors.
Please verify your ATV or UTV has a 1 7/16" hole before placing order. See our other products for expansion anchors that fit other models with smaller holes.
Our shift gate is one item we created with comfort and ease of use in mind.
The shift gate enables you to quickly and easily shift between forward and reverse gears even without looking!
With the factory shift gate it is necessary to move the shift lever over to the right then forward or backwards each time you want to shift gears. With our shift gate once you are in gear, gear change is as simple as forward and backward, saving time between gear changes and keeping your eyes on the trail, not on the shift knob.
The only wheel bearing greaser that allows you to evenly distribute grease without the need to remove your axle. Features six distribution ports for even bearing greasing. Designed for Polaris 40mm wheel bearings parts numbers 3514635 & 3585502. 44MM applications listed below. Proudly made in the U.S.A.
DragonFire UTV Harness is designed with smaller riders in mind. Rated for up to 120 lbs, DragonFire's Youth UTV Harness allows smaller riders added adjustablity due to its scaled down smaller profile on the length of the shoulder pads and straps..
Note: Additional installation hardware and/or moutning components may be required depending on model.
Package included 4 Universal Roll Cage Clamps
Clamp Dimensions 1' 5/8 inches - 2 ' 1/4 inches
Also, see THIS CLAMP HERE
UTV Mountain Accessories Off Road Buckle 2-point Harness with Auto Buckle:
- Auto Buckle 4-point harness (sold per each)
- Product durable and safe
- Sewn-in shoulder pads for comfort
- Front chest buckle to keep shoulder straps in place
- Product created with extreme care and precision
- Adjustable for all sizes kids to adults
- All black harness, as pictured
- Customer satisfaction 100% guaranteed
UTV Mountain Accessories Wildcat 4 1000:
- Works with the Wildcat 4 1000.
- Product created with extreme care and precision.
- Great for kids, about 60 lbs and under.
- Added seating.
- Secure safety.
UTV Mountain Accessories Wildcat 1000 Bump Seat:
- Works with the Wildcat 1000, Wildcat 1000 4 (front and rear).
- Also includes harness bar for Wildcat 2 seater and rear of Wildcat 4 seater.
- Product created with extreme care and precision.
- Great for kids, about 60 lbs and under.
- Added seating.
- Secure safety.
Bump Seat Kit Includes
- 1 Teryx Rear bump seat made of black vinyl
- 1 4-point harness with sewn in harness pad and chest buckle (great for kids)
- All mounting hardware
- Installation instructions
Bump Seat Kit Includes
- 1 Teryx Front bump seat made of black vinyl
- 1 4-point harness with sewn in harness pad and chest buckle (great for kids)
- All mounting hardware
- Installation instructions
UTV Mountain Accessories Wolverine X2/X4 Bump Seat:
- Works with the wolverine X2 & X4
- Product created with extreme care and precision.
- Great for kids, about 60 lbs and under
- Added seating.
- Secure safety.
- Free shipping to anyone in the lower 48 US states.
- Product in stock and ready to ship within 1-2 business days.
- Free overnight shipping to anyone in Utah.
Change your Wolverine X4 into a 5 Seater
Package includes:
- One Rear Bench seat made of all black vinyl - 3 UTVMA 4 Point Harness with sewn in harness pad and chest buckle - You will have to CUT the rear center console - All Mounting hardware (this seat includes 2 mounting brackets ) - Installation instructions
UTV Mountain Accessories 3-inch 4-point Harness with Off Road Buckle:
- Auto Buckle 4-point harness
- Product durable and safe
- Sewn-in shoulder pads for comfort
- Front chest buckle to keep shoulder straps in place
- Product created with extreme care and precision
- Adjustable for all sizes kids to adults
- All black harness, as pictured
- Customer satisfaction 100% guaranteed
UTV Mountain Accessories 2-inch 4-point Harness with Auto Buckle:
- Auto Buckle 4-point harness (sold per EACH)
- Product durable and safe
- Sewn-in shoulder pads for comfort
- Front chest buckle to keep shoulder straps in place
- Product created with extreme care and precision
- Adjustable for all sizes kids to adults
- All black harness, as pictured
- Customer satisfaction 100% guaranteed
UTV Mountain Accessories Grab Handles:
Priced per pair. Product created with extreme care and precision. Quick attachment and removal process. Adds personal hold security. Product in stock and ready to ship within 1-2 business days. Price Includes Shipping. Use coupon code "grabhandles" to save an additional $6 when bundled with purchase over $100.
Universal roll cage bag
THIS WILL FIT A 1 5/8" TO 2" ROLL BAR
-The roll cage bag you can attached to any part of your UTV roll cage -Great for all the extras that you never want to use but always glad you have - Quality craftsmanship zipper made to stand up to what every your kids can through at it. -Made of all Black carbon fiber vinyl
Get your Maverick X3 Max fully equipped with the UTVMA Bag Set. It includes the following items:
- Left/Right Front Door Bags ($99 msrp) - Roof Bag ($99 msrp) - (1) Universal Roll Cage Bags ($30 msrp)
Get all the bags together in a set and save BIG!!
Get your Maverick X3 Max fully equipped with the UTVMA Bag Set. It includes the following items:
- Left/Right Front Door Bags ($99 msrp) - Left/Right Rear Door Bags ($99 msrp) - Roof Bag ($99 msrp) - (2) Universal Roll Cage Bags ($60 msrp)
Get all the bags together in a set and save BIG!!
Maverick Max X3 rear door bags (Set of 2 driver and passenger)
-Comes with Knee pad that once you have you will never ride again without one! -Helps keep you “stuff” out of the elements, rain, dirt and Sun - Quality craftsmanship zipper made to stand up to what every your kids or the trail can through at it. -Made of all Black carbon fiber vinyl
Maverick X3/ X3 MAX center roof bag
- A great place to put all things you need out on the trail, Cell Phone, Sun glass trail map or GPS, and so much more!
- Helps keep you “stuff” out of the elements, rain, dirt and Sun
- Quality craftsmanship zipper made to stand up to what every your kids can through at it.
- Make of all Black carbine fiber vinyl
Maverick X3 front door bags (Set of 2 Left and Right)
- Comes with Knee pad that once you have, you will never ride again without one!
- Helps keep you “stuff” out of the elements, rain, dirt and Sun
- Quality craftsmanship zipper made to stand up to whatever your kids and the trail can throw at it.
- Made of all Black carbon fiber vinyl
PRICES INCLUDE SHIPPING!
Change your Maverick Sport Max 2019 into a 5 Seater
Package includes: - One Rear Bench seat made of vinyl (All Black, or Black with Grey) - 3 UTVMA 4 Point Harness with sewn in harness pad and chest buckle - All Mounting hardware (You will need the 2 stock mounting brackets off the stock seats) - Installation instructions
PRICE INCLUDES SHIPPING! You saw it here first folks--Change your MAVERICK X3 MAX into a 5 Seater!!!!!
Package includes:
- One Rear Bench seat made of all black vinyl - 3 UTVMA 4 Point Harness with sewn in harness pad and chest buckle - All Mounting hardware - Installation instructions
