Side by Side Outlet Parts and Accessories
MILITARY-GRADE AIR FILTRATION
KEEPS THE AIR FILTER IN YOUR RANGER CLEAN
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having to replace your air filter.
***Note: This kit will not fit models with Polaris Deluxe doors installed.***
MILITARY-GRADE AIR FILTRATION
KEEPS THE AIR FILTER IN YOUR GENERAL CLEAN
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having to replace your air filter
MILITARY-GRADE AIR FILTRATION
KEEPS THE AIR FILTER IN YOUR WILDCAT CLEAN
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having to replace your air filter
MILITARY-GRADE AIR FILTRATION
KEEPS THE AIR FILTER IN YOUR CAN AM CLEAN
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having to replace your air filter.
MILITARY-GRADE AIR FILTRATION
KEEPS THE AIR FILTER IN YOUR YXZ CLEAN
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having to replace your air filter.
These spacers are used to mount the Particle Separator above a factory roof.
This steel faceplate replaces the stock plastic one, adding greater protection and style.
Kit includes:
- 6 masive radius rods with RH/LH 5/8 bearings
- 17-4 Stainless Steel spacers
- O Rings on all spherical bearings
- 3 Piece Chromolly PTFE lined 5/8 bearings
- 6061 Aircraft grade aluminum
- Designed and Manufactured in-house, in the USA
- Lifetime warranty
Kit includes:
- 6 masive radius rods with RH/LH 5/8 bearings
- 17-4 Stainless Steel spacers
- 3 Piece Chromolly PTFE lined 5/8 bearings (Not Nylon injected)
- FKS Spherical bearings rated at 40,000 static radial load
- JMX Teflon Heims rated at 18,000 static radial load
- O Ring seals on bearings
- 6061 Aircraft grade aluminum
- Designed and Manufactured in-house, in the USA
- Lifetime warranty
- Innovative Design - Optional Aluminum Dust Cap Available - 4340 Heat Treated Chromolly Steel Housing - Heat Treated 17-4 Stainless Steel - Fully Rebuildable - Fully Adjustable with .0001-.0046 Preset adjustment Locations - Unique Dust Boot - Presses and Bolts into the A-arm. Does Not Use the OEM C Clip - 350% Stronger Than OEM and Others - Lifetime Warranty - Greasable - Made in the USA
2017 + Can-Am Maverick X3 RS Edition (72″) Steering Tie Rod Kit with heim ends. Complete steering upgrade for the Canam X3RS (72") Direct Bolt-on Replacement Available in machined finished or Type 3 Hard Black anodized
Can-Am Maverick X3 Billet Shock Brace for ALL models.
Can-Am Maverick X3 Fixed Front Sway Bar Links - One of the weak points in the Can-Am X3 is the stock front sway bar links. These front sway bar end links are the perfect upgrade, constructed from Billet 6061 aluminum, Chromolly PTFE lined spherical bearings and 17-4 Stainless misalignment spacers.
Can-Am Maverick X3 Fixed Rear Sway Bar Links - One of the weak points in the Can-Am X3 is the stock front sway bar links. These rear sway bar end links are the perfect upgrade, constructed from Billet 6061 aluminum, Chromolly PTFE lined spherical bearings and 17-4 Stainless misalignment spacers.
Can-Am Maverick X3 Rear Radius Rod Plate - Reinforces the rear chassis and adds strength to one of the weakest parts of the X3 Chassis.
*HOOK ONLY!
Works with our CanAm X3 billet pull plate to attach a tow strap or tie down hook.
Direct Bolt-on Replacement Fits 2017 .5+ RZR 1000, 2017-2018 RZR Turbo. 2/4 Seat. 12mm Bolt
These Polaris RZR XP ball joints are crafted with an innovative design and are made to last. Using a 4340 heat treated Chromolly housing and a heat treated 17-4 stainless steel stud, these ball joints are fully rebuildable and adjustable.
These ball joints come fully assembled and ready to install. Unlike other rebuildable ball joints that must be taken apart to install and adjust, ours is as easy as pressing it in, tightening the nut, and you're good to go!
These Polaris RZR XP ball joints are crafted with an innovative design and are made to last. Using a 4340 heat treated Chromolly housing and a heat treated 17-4 stainless steel stud, these ball joints are fully rebuildable and adjustable.
Our ball joints come fully assembled and ready to install. Unlike other rebuildable ball joints that must be taken apart to install and adjust, ours is as easy as pressing it in and tightening the nut and you're good to go!
Fitment (Upper and Lower):
- 2014+ RZR XP 1000 (lower and upper)
- 16-18 RZR XP Turbo (lower and upper)
Direct Bolt-on Replacement Fits 2014 - part of 2017 RZR 1000/Turbo 64" (check bolt size, these are the 10mm) Available in machined finished or Type 3 Hard Black anodized
2014 - 2016 Polaris RZR 1000 XP and 2016 TURBO (64″ wide)
Billet high clearance radius rods Direct Bolt-on Replacement
2017 .5+ Polaris RZR (64″) 2017-2018 Turbo Billet high clearance radius rods.
Tired of that splined socket falling out of your standard socket when trying to take aftermarket wheels on or off your machine? We took the liberty of welding the splined socket into a 1/2" drive standard socket for you to make the entire process seamless.
This belt changing tool is a must have tool for the Polaris RZR owners as it will make changing the belt a super easy job. Larger design allows for better hand grip and leverage without slippage.