Side by Side Outlet Parts and Accessories

• Only adds 2.5” to height of RZR®
• Helps to blow out of RZR® bed
• Bolts directly to RBO Roof with no Drilling or Modifying
• Includes Mounting Hardware
• Will work with Most Aftermarket Roofs (Check Dimensional Drawings)
• Powder Coated Black Finish
• Made from High Strength lightweight aluminum
• Made in USA

• Lightweight 1/8” Aluminum
• High Strength Design
• No drilling or modifying
• RBO Clamp System allow easy installation
• Fits with stock Polaris visor
• Tough powder coat black finish
• Keep your ride dust proof and allow for added protection
• Not designed to be used with full side doors with side windows
• Made in the USA

• Made in USA
• Made From 1.5” Diameter Steel Tubing
• Powder Coated Finish
• Tailgate can be Pad-Locked
• (3) “It Fits” ™ mounting locations for RBO accessories.
• Multiple Tiedown Points in the Top Rack so you can secure Cargo from every direction
• Mounts without Modifying your UTV using basic hand tools
• All Mounting Hardware included
• Maximum Combined Capacity of Cargo Rack 160 lbs. (Limited by Vehicle Capacity)
• Load Capacity of Top Rack is 60 lbs. (Limited by Vehicle Capacity)
• Load Capacity of Side Rack is 30 lbs. per side (Do Not Mount Spare Tires on Side Racks)
• For Racks with a Tailgate the Load Capacity of the tailgate is 40 lbs. (Limited by Vehicle Capacity)

• Made from 1.5” diameter steel tubing
• Powder coated finish available in textured black
• (2) “It Fits”™ mounting locations for RBO accessories.
• Multiple tie-down points in the top rack so you can secure cargo from every direction
• Mounts without modifying your UTV using basic hand tools
• All mounting hardware included
• Load capacity of top rack is 60 lbs. (limited by vehicle capacity)
• Load capacity of side rack is 30 lbs. per side (do not mount spare tires on side racks)
• Made in USA

• Rack Made from 1.5” Steel Tubing Powder Coated Tuff Coat Black
• Cargo Tray is made from Marine Grade High Strength Aluminum 18-3/4” deep x 52” Wide x 4” Tall (I.D.)
• The load capacity of the Upper Cargo Tray is 150lbs evenly distributed
• 72 Total Tie-Down Slots
• Can-Am Defender Storage Rack does not impede bed dump function (do not overload bed or Center of Gravity)
• Can-Am Defender Cargo Rack is Easy to Install and Remove “average time is 15 min”
• Made in the USA
• Includes all installation hardware “no drilling or modifying required”
• RBO Money Back Guaranteen

• ** Remove spare tire from tailgate before tilting bed! Serious injury or damage could occur!
• Does not interfere with dump bed operation
• Tailgate can be padlocked to secure items
• (3) “It Fits”™ mounting locations for RBO accessories.
• Secure cargo from every direction with multiple tie-down points
• No modification needed! Use basic hand tools to install
• Maximum combined capacity of cargo rack 160 lbs. (Limited by vehicle capacity)
• Load capacity of top rack is 60 lbs. (Limited by vehicle capacity)
• Load capacity of side rack is 30 lbs. per side (Do not mount spare tires on side racks)
• MAX Tailgate Load Capacity is 40 lbs. *Spare tire should not exceed 40 lbs. or 29″ in diameter.*
• Made from 1.5” diameter steel tubing
• Powder coated finish available in textured black
• All mounting hardware included
• Made in USA

• Made in USA
• Made From 1.5” Diameter Steel Tubing
• Powder Coated Finish available in textured Black
• Tailgate can be Pad-Locked
• (3) “It Fits” ™ mounting locations for RBO accessories.
• Multiple Tiedown Points in the Top Rack so you can secure Cargo from every direction
• Mounts without Modifying your UTV using basic hand tools
• All Mounting Hardware included
• Maximum Combined Capacity of Cargo Rack 160 lbs. (Limited by Vehicle Capacity)
• Load Capacity of Top Rack is 60 lbs. (Limited by Vehicle Capacity)
• Load Capacity of Side Rack is 30 lbs. per side (Do Not Mount Spare Tires on Side Racks)
• MAX Tailgate Load Capacity is 40 lbs.*Spare tire should not exceed 40lbs. or 29″ in diameter.*

• Rack Made from 1.5” Steel Tubing Powder Coated Tuff Coat Black
• Cargo Tray is made from 1/8” Aluminum 18-3/4” deep x 52” Wide x 4” Tall (I.D.)
• The load capacity of Upper Cargo Tray is 150lbs evenly distributed
• 72 Total Tie-Down Slots
• Rack does not impede bed dump function (do not overload bed or Center of Gravity)
• Easy to install and remove.
• Made in the USA
• Includes all installation hardware “no drilling or modifying required”
• RBO Money Back Guarantee

• Rack Made from 1.5” Steel Tubing Powder Coated Tuff Coat Black
• Cargo Tray is made from 1/8” Aluminum 18-3/4” deep x 52” Wide x 4” Tall (I.D.)
• Load capacity of Upper Cargo Tray is 150lbs evenly distributed
• 72 Total Tie Down Slots
• Rack does not impede bed dump function (do not over load bed or Center of Gravity)
• Easy to install and remove.
• Made in USA
• Includes all installation hardware “no drilling or modifying required”
• RBO Money Back Guarantee

• Made in USA
• Designed to be compatible with the Factory CFMOTO ZFORCE Cargo Net
• Fits CFMOTO ZFORCE 1000, CFMOTO ZFORCE 800EX, CFMOTO ZFORCE 800 Trail &; CFMOTO ZFORCE 500 TRAIL
• Made From 1.5” Diameter Steel Tubing
• Available in Black Powder Coated Finish
• (2) “It Fits” ™ mounting locations for RBO accessories.
• Multiple Tiedown Points in the Top Rack so you can secure Cargo from every direction
• Mounts without Modifying your UTV using basic hand tools
• All Mounting Hardware included.
• Maximum Combined Capacity of Cargo Rack 120 lbs. (Limited by Vehicle Capacity)
• Load Capacity of Top Rack is 60 lbs. (Limited by Vehicle Capacity)
• Load Capacity of Side Rack is 30 lbs. per side  (We Do Not Recommend Mounting Spare Tires on Side Racks

• Made in USA
• Made From 1.5” Diameter Steel Tubing
• Black Powder Coat Finish
• Tailgate can be Pad-Locked
• (3) “It Fits” ™ mounting locations for RBO accessories.
• Multiple Tiedown Points in the Top Rack so you can secure Cargo from every direction
• Mounts without Modifying your UTV using basic hand tools
• All Mounting Hardware included
• Maximum Combined Capacity of Cargo Rack 160 lbs. (Limited by Vehicle Capacity)
• Load Capacity of Top Rack is 60 lbs. (Limited by Vehicle Capacity)
• Load Capacity of Side Rack is 30 lbs. per side (Do Not Recommend Mount Spare Tires on Side Racks)
• MAX Tailgate Load Capacity is 40 lbs.*Spare tire should not exceed 40lbs. or 29″ in diameter.*

• Largest Viewing area on the market
• DOT Approved Laminated Glass 1/4” Thick
• Manual Windshield Wiper
• Made from Military Grade Aluminum
• Fits with Factory Polaris Antenna
• Powder Coated Black Finish
• Installs in about 20 minutes with basic tools
• Most advanced Windshield on the market
• Made in the USA

• Full Size DOT Glass Windshield with Maximum Viewing Area.
• Full Size Automotive Style Manually Operated Windshield Wiper
• Easy to Install with No Drilling
• Verify Grille Fitment for 2020 using this graphic
• Made from Military Grade Aluminum
• Powder Coated Black Finish
• RBO Exclusive Adjustable Air Vents
• Made in the USA

• Light Weight High Performance Design
• Designed Exclusively for the Turbo S
• D.O.T. Approved Glass Fold Down Windshield
• Fully Functional Air Vents (That Actually Work)
• Manual Wiper Included
• Black Powder Coat
• Easy to Install with basic tools
• Installation Video Link: HERE
• Will work with most Clamp on aftermarket Mirror Mounts
• Made in the USA

• Light Weight, High-Performance Design
• D.O.T. Approved Glass Fold Down Windshield
• Fully Functional Air Vents (That Actually Work)
• Works with Factory Heater.
• Comes with Manual Wiper.
• Powder Coated Black.
• Will work with Most Aftermarket Mirrors.
• Easy to Install

• Light Weight Design
• Powder Coated Black Finish
• Stainless Steel RBO Exclusive Hinges
• Fold Down Windshield with Easy Close Latches
• Fully Functional CNC Machined Vents
• Manually Operated Windshield Wiper
• 1/4” Laminated DOT Approved Glass
• Rubber Latch Windshield Hold Down System
• Easy to Install with basic hand tools (Some Drilling Required)
• Installation Video: HERE
• Made in the USA

• Light Weight Design
• Black Powder Coat Black Finish
• Stainless Steel RBO Exclusive Hinges
• Fold Down Windshield with Easy Close Latches
• Fully Functional CNC Machined Vents
• Manually Operated Windshield Wiper
• 1/4” Laminated Glass
• Rubber Latch Windshield Hold Down System
• Easy to Install with basic hand tools
• Installation Video: HERE
• Note: Factory visor required for proper installation of the windshield
• will not work with overhead audio roof by Polaris.
• Will work with most Clamp on aftermarket Mirror Mounts 
• Made in the USA

Note: *Will NOT fit the Polaris® General XP models due to the wider fender flares.

• Designed to Actually Work
• Helps protect the underside of your Polaris General
• Can be used as a Jack Point
• Easy to Install with No Drilling or Modifying Required
• Complete Kit with (2) Rock Sliders / Nerf Bars and all hardware
• Powder Coated in our Tuff Coat Endurance Black Finish
• 1.5” Steel Tube Construction
• Laser Cut Fabricated Load Dispersion Plate
• Made in the USA
• Also available for the 2-Seater Polaris General

• Designed to Actually Work
• 1.5” Steel Tube Construction
• Laser Cut Fabricated Load Dispersion Plate.
• Can be used as a Jack Point
• Helps protect the underside of your Polaris General
• Powder Coated in our Tuff Coat Endurance Finish Black
• Easy to Install with No Drilling or Modifying Required
• Complete Kit with (2) Rock Sliders / Nerf Bars and all hardware
• Made in the USA
• Also available for the 4-Seater Polaris General
• Note: Not compatible with XL wide Fender Flares - they will work if you cut the fenders down

• Tough Coat Black Powder Coated Finish
• Easy to install onto RBO Polaris General “GP” Cargo Rack and RBO Polaris General Expedition Cargo Rack (No Drilling Required)
• Includes 10mm and 12mm spare tire mounting studs, Lug Nuts and Mounting Hardware
• Will hold a front or rear wheel and tire up to 28” diameter
• Fully Adjustable Design allows mounting of varying Tire and Wheel Sizes up to 28” Tall
• Made in the USA
• RBO 30 Day Money Back Guarantee

• Fabricated Steel Construction
• Features the RBO “It Fit’s™” Adjustable Spare Mount
• Available in Textured Black Powder Coated Finish
• Easy to Install onto Your RBO Kawasaki Mule Utility Cargo Rack (RBO5235) Using Included Hardware
• Includes 10mm and 12mm Spare Tire Mounting Studs and Nuts
• Will Hold Front or Rear Tire and Wheel in all Sizes
• Mounting slots to adjust for different tire heights and widths
• Made in The USA
• Comes with the RBO Money Back Guarantee
• *Do not mount on the outside of rack*
• *Spare tire should not exceed 28” diameter or 40lb. weight limit*

• Fabricated Steel Construction
• Features the RBO “It Fit’s™” Adjustable Spare Mount
• Available in Textured Black Powder Coated Finish
• Easy to Install onto Your RBO Can-Am Defender Utility Cargo Rack (RBO5230) Using Included Hardware
• Includes 10mm and 12mm Spare Tire Mounting Studs and Nuts
• Will Hold Front or Rear Tire and Wheel in all Sizes
• Mounting slots to adjust for different tire heights and widths
• Made in The USA
• Comes with the RBO Money Back Guarantee
• *Do not mount on the outside of rack*
• *Spare tire should not exceed 28” diameter or 40lb. weight limit*

• Fabricated Steel Construction
• Features the RBO “It Fit’s™” Adjustable Spare Mount
• Available in Textured Black Powder Coated Finish
• Easy to Install onto Your RBO Bobcat Utility Cargo Rack (RBO5145-B) Using Included Hardware
• Includes 10mm and 12mm Spare Tire Mounting Studs and Nuts
• Will Hold Front or Rear Tire and Wheel up to 28" Sizes
• Mounting slots to adjust for different tire heights and widths
• Made in The USA
• Comes with the RBO Money Back Guarantee
• *Do not mount on the outside of rack
• *Spare tire should not exceed 28” diameter or 40lb. weight limit*