Side by Side Outlet Parts and Accessories

PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System

Snow doesn't stand a chance against DENALI Pro UTV Snow Plows. Designed in the USA, these heavy duty, County-style 12-gauge steel UTV plow blades make quick work of powder and wet snow. The center mounted design disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. The plow kit includes a reversible wear bar, rubber flap, and skid feet to protect the blade from wear and tear. Dual-layer powder & Polyester paint coat boosts corrosion protection and UV resistance, keeping you plowing for seasons to come.

Please Note:All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, VIPER Max, or VIPER Midnight winch with an automatic brake.

Kit Contents:

• UTV Snow Plow Blade - County / DOT Style
• UTV Pushtubes
• One (1) Reversible Wearbar
• Rubber Flap
• Rubber Flap Stabilizer Bar
• Skid Feet
• Plow Markers
• Plow Mount (add year, make, & model in notes section at checkout)
• Installation Hardware and Instructions

Blade Features:

• County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
• Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
• Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
• High strength, high yield 3/16 thick Grade 50 steel wear bar
• Angled Blade : 16 on the low side; 23 on the high side
• Rubber flap & stabilizer bar with rubber flap
• Height AND angle adjustable steel skid feet
• 3 Year Warranty
• Made in the USA

Pushtube Features:

• PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
• Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
• Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
• Simple detachment system with the pull of a pin
• Structural tube steel cross bar for added lateral rigidity
• Quick release pins included
• 13.5 inches center to center for plow mount tabs
• Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
• Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)
• Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

Optional Hydroturn Features:

• PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
• Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
• Change the blade angle while driving; full radius turn in just 10 seconds
• Heavy duty chrome plated ¾″ cylinder shaft
• No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
• Wire harness utilizes weatherproof connectors

Optional Plow Pulley Fairlead Features:

• • Roller
    •      Replaces the winch fairlead during the plow season
    •      For use with Steel AND Synthetic cables
    •      Curved cable groove helps eliminate flattening and breaking of cable
    •      Bolt Patterns:
    •         Standard Spool: 3″ x 4.875″
    •         Wide Spool: 3" x 6.67″

• • Sheave
    •      Includes pulley, 1/4″ clevis hook and nylon strap
    •      Allows greater precision when raising/lowering plow blade and increases the angle of pull

• Cable
  •      12′ length, 1/4″ diameter
  •      Single braid, dyneema rope with galvanized steel thimble/eyelet

THE ULTIMATE SIDE VIEW LIGHT/MIRROR FOR YOUR UTV! Fits 1.5 - 2.0" Cage Size

Light up your night! The ultimate upgrade to help you SEE CLEARLY what's in front and behind you!!

-Two products in one - Lights up a 210 degree field of view in front and convex mirrors for maximum rear view.

-The ultimate upgrade to use day and night!

-CNC Machined from 6061 Billet Aluminum in Nampa, ID U.S.A.

-8,000 raw lumens of light (4,000 per mirror).

-Removable bezel can be color coated to match your ride.

-Adjustable break-away action. You decide how light or strong you want it to be.

-2-Wire open lead for easy wiring.

-SOLD IN PAIRS

-MADE IN U.S.A!   Nampa, ID

FITS 2 & 4 SEAT PRO XP & TURBO R 2020-2023

FEATURES

17LBS TOTAL WEIGHT. 9LB SAVINGS 304 STAINLESS STEEL FULL 3" DESIGN DUAL O2 BUNGS UTILIZES FACTORY REAR FASCIA INCLUDES NEW GRADE 8 MANIFOLD BOLTS INCLUDES NEW TURBO FLANGE GASKET V-BAND SS FLANGE ASSEMBLY 100% TIG WELDED GREAT DEEP SOUND WITHOUT BEING LOUD COMES WITH EVERYTHING NEEDED FOR INSTALL TUNING RECOMMENDED BUT NOT REQUIRED! ** FOR EASE OF UN / INSTALLING THE STOCK MUFFLER, WE RECOMMEND OUR SPRING HOOK TOOL

• • Light Weight High Performance Design
  • Designed Exclusively for the Turbo S
  • D.O.T. Approved Glass Fold Down Windshield
  • Fully Functional Air Vents (That Actually Work)
  • Manual Wiper Included
  • Black Powder Coat
  • Easy to Install with basic tools
  • Installation Video Link: HERE
  • Will work with most Clamp on aftermarket Mirror Mounts
  • Made in the USA

• • Made in USA
  • Designed to be compatible with the Factory CFMOTO ZFORCE Cargo Net
  • Fits CFMOTO ZFORCE 1000, CFMOTO ZFORCE 800EX, CFMOTO ZFORCE 800 Trail &; CFMOTO ZFORCE 500 TRAIL
  • Made From 1.5” Diameter Steel Tubing
  • Available in Black Powder Coated Finish
  • (2) “It Fits” ™ mounting locations for RBO accessories.
  • Multiple Tiedown Points in the Top Rack so you can secure Cargo from every direction
  • Mounts without Modifying your UTV using basic hand tools
  • All Mounting Hardware included.
  • Maximum Combined Capacity of Cargo Rack 120 lbs. (Limited by Vehicle Capacity)
  • Load Capacity of Top Rack is 60 lbs. (Limited by Vehicle Capacity)
  • Load Capacity of Side Rack is 30 lbs. per side  (We Do Not Recommend Mounting Spare Tires on Side Racks

The Polaris RZR XP Turbo exhaust system can be one of the best performance modifications you can do. Like most turbocharged vehicles, backpressure is not a requirement. A turbo is at its peak performance with no restrictions right out of the turbo exhaust housing. Where this is common on racecars, normal use can become unbearable. Cruising forest trails or high traveled roads could be deafening loud and not the most PC way to ride. However, you can have the best of both worlds with an Agency Power valvetronic exhaust system.

Agency Power has been manufacturing valvetronic exhausts for vehicles since 2008. A valvetronic exhaust features a remote operated valve that can be opened and closed at the push of a button. This allows you to redirect the exhaust flow which changes the exhaust sound. On most vehicles, when the valve is closed, the exhaust gases are routed through a muffler to give you a more subtle tone. When the valve is open, the exhaust gases typically bypass the muffler system for a straight restriction free path.  The end goal is to give you all the power and performance!

Some exhaust systems feature a valve after the muffler which blocks one of the tip exits to slightly quiet the tone. This may change the sound by a few decibels, but is still very restrictive. The exhaust flow going through the chamber muffler is not giving your turbocharger any additional performance between the modes. To really get the most performance and sound, you want to put the valve before the muffler.  This design drastically changes the sound of your RZR XP Turbo. With the valve open, the straight exit exhaust will build boost faster giving you the jump on your competition. The turbo spool is noticeably faster allowing you to gain peak performance sooner.

The Agency Power valvetronic exhaust for the Polaris RZR XP Turbo is made here in Arizona, USA.  It is constructed of T304 stainless steel that has been hand TIG welded using proven JIGs and vehicle testing. The exhaust mounts directly to the turbo pipe with a thick 3 bolt flange. A beautiful merge splits between the chambered Magnaflow muffler and the exhaust valve. The muffler was spec’d to provide a sporty tone when the valve is closed. Exiting each side of the muffler is a straight cut 2.50 inch turn down exhaust tip with holes to install a spark arrestor. With 2 tips, you can reuse your existing spark arrestor and optionally purchase 1 or 2 from us as needed. The included remote components operate the butterfly valve via a vacuum solenoid. The solenoid is tapped into a vacuum source on the RZR XP Turbo engine which opens and closes the valve with the remote key fob. The key fob sends the signal to a remote box which controls the solenoid. The remote box is sealed however it is recommended to be installed in an area not prone to water.

Each system includes a new Agency Power exhaust shield. The exhaust shield is precision water jetted out of stainless steel feature the AP logo and a unique design element. The heat shield is designed specifically for this exhaust system. The exhaust mounts to factory hanger and bracket positions. This system is a complete bolt-on installation and does not require any cutting, welding, or other exhaust modification. The exhaust features a bung for the factory O2 sensor. Additional O2 bungs can be welded on for those running aftermarket AFR gauges.

Features:

• Valvetronic Dual Tone Sound
• Includes Remote Key FOBs
• Uses Magnaflow Muffler
• Stainless Steel Construction
• Allows for Use of Spark Arrestors
• Included AP Logo Heat Shield
• Available in RAW Stainless or Black Coated

Notes:

• Exhaust may be made to order taking 2-4 weeks
• Remote electronic box should be mounted in a water tight area
• Electronic module requires power and ground wiring
• View Installation Instructions Here

Fitment:

• Polaris RZR XP Turbo 2016-2021
• Polaris RZR XP4 Turbo 2016-2021

2018-2020 Maverick Trail/Sport

Our front windshields offer the best fitment and biggest viewing area

Features/Benefits Include :

• 1.5” DOM steel tube • Gain up-to 2” of ground clearance • Lighter and more durable than OEM at 27.87 lbs each ​• Swaged construction ​• Heavy-duty Heim Joints ​• Reinforced steel plating ​• Compatible with OEM shocks and sway bar link rods ​• Easy do-it-yourself installation using a floor jack and common metric tools

Machined from heat-treated domestic materials, our Steel Sprague and Armature […]

Machined from heat-treated domestic materials, our Steel Sprague and Armature […]

Off-road auxiliary lighting is one thing, but everyone knows that […]

Did you know your FOX Shocks dont have FOX springs on them?  Would you be disappointed to find out the Walker Evans package you paid for has cheap Chinese coils on them?  We were!  That's why Shock Therapy stepped up to the plate!  Custom designed spring setups for the machine you ride, for the terrain you ride, and it takes into consideration any extra pounds you (or your machine) may have.  Fill out the form below, and we will get you a custom quote back for the perfect setup for YOU and YOUR MACHINE!

https://youtu.be/Ty23ZAnTCgg