Side by Side Outlet Parts and Accessories

The OEM mount can and does break in the center due to thin and cheap material. Also due to tolerance issues there can be play in between the bushing and mount causing excess movement which leads to wear. We have worked to achieve a better tolerance fit around the bushing as well as we machine the holes to accommodate a tighter fit on the mounting bolt to reduce movement there as well.

64" model is pictured. 72" model is the same design

Our control arms are laser cut from 4130 chromoly then CNC broke for extremely high quality and accuracy. We've meticulously designed our control arms to be a problem solving bullet proof solution for your X3. Our arms solve all the common and weak points that typically cause failures on OEM arms.

Our arms come with bushings installed, but not ball joints.

The X3 Front Gusset Kit is a must for hard riders who want to keep their pride and joy machines in perfect working order. The X3 has what many people call a (floating front end). The front of the machine ahead of the A-Arms is only supported by the radiator. With our gusset kit the front end will be completely tied together and allow you to bring your machine to full potential.

The first & only Polaris RZR Fuel Door

This product keeps most mud, dirt, & debris from collecting in the fuel filler pocket in the Polaris RZR rocker panel. It is also lockable!  Most 2014/15+ RZR's use the same rocker panel, so this product is very universal.

All hardware is included, and is stainless. Install directions & templates are also included. Door is made of HDPE plastic material (no rust, lightweight, no chipping paint, similar texture to factory body side).  Comes with two keys.

Requires drilling (4) holes in your body panel. 2 for the hinge mount, & 2 for the latch catch.

***Note: This product will not work with certain rock sliders / nerf bars which follow along the fuel door opening. There needs to be room for the door to swing open.

DUAL CUP HOLDER FITS ALL RZRS WITH A 3/4 INCH SQUARE T HANDLE GRAB BAR EASY INSTALLATION AND REMOVAL THIS SALE IS FOR CUP HOLDER ONLY (GRAB HANDLE NOT INCLUDED)

OPTIONAL BUMP STEER REDUCTION SPACERS 

Our tie rods also feature patented ST geometry that place a long spacer on the upper side which shifts the tie rod geometry further down than stock helping reduce an issue known as bump steer. Bump steer is essentially oscillation of the steering components as the suspension components cycle up and down. as the suspension compresses and extends, when the steering geometry is not in line with the suspension geometry this will cause the vehicle to unexpectedly change the toe degrees. This in turn causes extra negative feedback in the steering wheel and will drastically increase resistance in drive ability as well as increased wear on other components.

We call this a bump steer reduction as that is more closely what it is. Since we must operate within the mounting points of the factory knuckle, there is only so much adjustment that can be made. However, this kit will almost completely rid your vehicle of bump steer.

Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 1.5"x 8" Aluminum bar stock. We then machine both pieces, send them out for powder coating and then round all of our corners to give it a look that really pops and will wow anyone.

Our plate is accompanied by stainless hardware mounting the hook to the plate and as our plate has a full lifetime warranty against any workmanship and defects and is produced right here in the U.S.

Features

LOCAL PICKUP ONLY until suppliers catch up and we can drop ship from them.

LARGEST ON THE MARKET!

Details

• This Cargo Box is custom fit for the Polaris RZR® 900 Trail, 1000S
• 275L capacity.
• 42" L x 26" W x 16" H.
• Molded from Impact Resistant Low Density Polyethylene ensures that this cargo box will withstand any terrain.
• With a water tight seal in the lid to keep contents inside protected from the elements, you can ride with confidence, your gear will stay dry and secure at all times!
• Easy to install and remove with Lock n' Ride compatible quick release system included.

Use this empty storage pack to stuff whatever you need into. Great for carrying your lunch, some dry socks, your cell phone, anything!  Container lid opens like a briefcase to store items.

Capacity

Each single pack holds about 2 gallons worth of stuff. You can actually cram quite a bit of useful items in here.

Dimensions

17 3/4 L x 13 1/4 W x 3 H

This new muffler for the Polaris RZR 800 is an incredible 5 decibels quieter than stock while providing 41% increase in airflow (20 more cfm) for more power. The subtle sound of this quiet silencer provides a relaxing environment for the rider and passenger to carry on conversation easily while under way, not to mention the benefit to others in surrounding areas. Whether you are using your RZR to get you in and out of your favorite hunting spots or just want to have a more enjoyable ride with less noise, this muffler is perfect for you. Also features a removable spark arrestor.

5 dB quieter on SAE J1287 stationary test @ 3300 RPM

No fuel controller required.

Note: 2009 RZR-S 800 will require the rear differential stabilizer bracket to be changed to the 2010 rear differential stabilizer bracket (Polaris Part Number 3235062).