Side by Side Outlet Parts and Accessories
Agency Power’s Intercooler Duct Cover for the Can-Am Maverick X3 is a product that all X3 owners will want to be equipped with! This simple design change can greatly benefit your UTV’s performance and efficiency. By design, intercoolers work by taking the air flow from the outside to cool the hot air inside the intercooler parts. Getting more air flow to the intercooler helps with this process. This is why you will see automotive and off-road aftermarket users trimming up bumpers or grills to improve air flow. In the Can-Am X3 intercooled models, the air is directed to the intercooler with a cover that features ducts/scoops right behind the rear seats. These inlets on this cover feed the top side of the intercooler the fresh air it needs. Using the same location and improving the size of scoops Agency Power has created an OEM replacement product that is stylish and a great way to increase air flow to the intercooler.
The Agency Power upgraded intercooler duct cover increases the center scoop from 1.5 inches to 4 inches tall and each side scoop from 1.5 inches to 2 inches with all keeping a 4 inch width. The intercooler duct cover increases the inlet air flow by over 40% from 32 cu in to 46 cu in. Made from a durable ABS plastic similar to the stock unit, it features a smooth black finish. The intercooler duct covers feature the AP logo and are designed to fit over the stock intercooler or the Agency Power intercooler. For those that want to customize further, the cover can be easily primed and painted by your local paint shop. Each kit comes with everything needed to snap into place. If you want to improve how your intercooler works at the track, on the trail, or in the dunes, then you must get the Agency Power Intercooler Duct Cover!
Features:
- ABS Plastic
- Smooth Black Finish
- Finish Allow To Be Primed
- Increases Air Inlet Flow by 40%
- Comes with New Hardware
Fitment:
- 2020+ Can-Am X3 All Models 2 | 4 Door
NO LONGER AVAILABLE THROUGH CAN AM
Fits all Models Maverick (not X3) 2019+ and Commander 2021+
- In-line wire harness to help power your key-on electrical accessories.
- Insert into your taillight plug socket and connect your accessories.
- Provides auxiliary ground wire, key-on power wire and an optional brake light power wire.
- Eliminates splicing wires or permanently altering the stock harness.
Easy install with Screws (provided). Built with reinforced plastic back wall, water-repellent material and heavy-duty hardware. Attaches front to back of the manufacturers plastic roof using the existing roof nipples (drilling required) and the pre-set holes on the console. It is made with 4 separate compartments.
Made in the USA.
UTV Mountain Accessories Grab Handles: -Priced per pair. -Product created with extreme care and precision. -Quick attachment and removal process. -Adds personal hold security.
This pet pad fits the Maverick Trail50/sport rear bed. designed to fit the entire bed.
It attaches via heavy-duty velcro. It is made of water-repellent vinyl material, Extra dense 1 1/2" faom padding and heat reflective material on the bottom side. Available in black only. Overall measurements are 36" wide and 23" wide
Full Glass windshield with flip up vents on the bottom. Pre-drilled for a manual wiper. WE DO NOT SHIP THIS ITEM - local pickup ONLY.
These RZR doors are light, durable and attractive. The strong lightweight powder coated steel tube frame makes for an extremely durable door that will retain its function and fit for years. The light weight hard plastic skin is attractive and withstands bumps and bangs without denting unlike metal skins. The spring loaded double catch interior latch assembly allows quick and easy access with only a light push or pull required to latch it closed. And best of all, they provide the operator and passenger a more comfortable off-road experience. Sold per pair.
Door Seal Kit Part #67-158 (Optional): Helps to keep dust, mud and water out of the cab Each Kit Comes with enough seal for a complete set of SLP RZR Doors
Note: 2014 RZR XC 800 will require the side roll bars to be replace by standard 800 roll bars. RH Polaris #5337953-458 LH Polaris #5337952-458
We at SbSO do recommend replacing the plastic rivets on the door skin with standard steel or aluminum ones for a longer-lasting enjoyment.
Fits John Deere Gator 625i (2011-2018)Use your cooling system to heat your UTV's cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. What makes our heaters better, if not the best, is that you are dealing with the designer/manufacturer and most of the kits have been installed by us and fitment checked. We use modern automotive quality vents- not something that looks like is was made in the 50's, so they match the modern styling of your UTV. Most of our kits use custom made solid CNC machined Y connection fittings, so there is no chance of leaking welds. We endeavor to use quality parts and hardware in all our kits.This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front vents that direct the heat where you need it and an optional 2” vent defrost kit keeps your windshield clear. The heater features a three speed fan and temperature adjustment is located right on the 14,600 BTU heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet and you can still use your cup holders. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engines cooling system. The kit comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more.
FILTER TYPEDRY CLEANABLEFLANGE ID (A1)2.95"FLANGE HEIGHT (A2)1.15"TOP WIDTH (A3)5.5"BASE WIDTH (A4)6"ELEMENT HEIGHT (A5)9.6"OVERALL HEIGHT (D3)13.1"
