Side by Side Outlet Parts and Accessories

Rear sway bar stop clamp

This clamp attaches to your sway bar and prevents it from sliding side to side causing excess noise from the rear of the machine.

Machined from 6061 aluminum including all hardware.

Do you notice a popping noise from the rear of your X3 on a trail? Do you have visible wear on your sway bar evident that it is sliding side to side? We have a simple and effective solution.

We also have to listen to the annoying popping, slamming, and banging of the sway bar on a trail. But now with our clamps in place on the sway bar you won't have those anymore.

Or simple bar clamps bolt on the outer side of your seat bar mounts locking it in place so it cannot slide side to side.

Clamps are machined from 6061 aluminum include all hardware, instructions, and a lifetime warranty.

Kit contains two (2) clamps

The only wheel bearing greaser that allows you to evenly distribute grease without the need to remove your axle. Features six distribution ports for even bearing greasing. Designed for Polaris 40mm wheel bearings parts numbers 3514635 & 3585502. 44MM applications listed below.  Proudly made in the U.S.A.

Features: Black industrial powder coat finish Includes mounting hardware and detailed instructions For use with the standard spool, 4-bolt mounting pattern (3" x 4 7/8")

2009-2014 Ranger HD 2011-2014 Ranger Diesel 2009-2010 Full Size Ranger 500 4x4 2009 Full Size Ranger 700 4x4 2010-2014 Full Size Ranger 800 4x4 2010-2014 Full Size Ranger 800 4x4 Crew** 2010-2017 Full Size Ranger 800 6x6 ** for optimized installation an Extended Wiring Kit to reach the battery is recommended. Please Note: will NOT work with the Full-Size Ranger XP 900 or Full-Size Ranger XP 900 Crew

Features: Black industrial powder coat finish Includes mounting hardware and detailed instructions For use with the standard(3" x 4 7/8") and wide (3" x 6.67") spool, 4-bolt mounting pattern

All Rangers with an Extreme Bumper installed Please Note: does NOT fit 2013-2015 Ranger 900 with Extreme Bumpers

Features: Black industrial powder coat finish Includes mounting hardware and detailed instructions For use with the standard spool, 4-bolt mounting pattern (3" x 4 7/8")

2015-2018 Mule PRO DXT, DX 2015-2019 Mule PRO FXT, FX Please Note: for optimized installation on the Mule PRO FXT, an extended wire kit to reach the battery is recommended.

Features: Black industrial powder coat finish Includes mounting hardware and detailed instructions For use with the standard(3" x 4 7/8") and wide (3" x 6.67") spool, 4-bolt mounting pattern

2012-2013 Teryx 4 (4-seater) 750 2014-2019 Teryx 4 (4-seater) all models 2014-2019 Teryx 2 (2-seater) all models

Please Note: We HIGHLY recommend an MX3500-5000lb or any Elite winch for use on Teryx 2 and 4s. Max 2000-3000lb winches need to have the motor clocked in order to prevent the terminals from interfering with the bumper. Max 3500-5000lb and Elite 3000-5000lb winches do not require clocking.

Features: Black industrial powder coat finish Includes mounting hardware and detailed instructions For use with the standard spool, 4-bolt mounting pattern (3" x 4 7/8")

2002-2008 Ranger 2x4, 4x4 2002-2009 Ranger 6x6 2004-2006 Ranger TM 2005-2008 Ranger XP 2008-2009 Ranger Crew Please Note: a Universal Fairlead Mount Plate is needed, and is included with all VIPER winch kits. If purchasing just this Mount Plate, the Universal Fairlead Mount Plate will need to also be purchased - it comes in every Viper Winch as well.

Features: Black industrial powder coat finish Includes mounting hardware and detailed instructions For use with the standard(3" x 4 7/8") and wide (3" x 6.67") spool, 4-bolt mounting pattern

2011-2019 Gator XUV 625i / 825i / 855D Please Note: This mount will NOT work with the installation of the John Deere POWERtach Plow System

Features: Black industrial powder coat finish Includes mounting hardware and detailed instructions For use with the standard(3" x 4 7/8") and wide (3" x 6.67") spool, 4-bolt mounting pattern

2013-2017 Maverick 1000R 2016-2017 Maverick 1000R xc 2016-2017 Maverick 1000R Turbo 2014-2017 Maverick 1000R X mr 2013-2017 Maverick 1000R X rs 2014-2017 Maverick 1000R X xc 2014-2017 Maverick Max 1000R & Turbo ** 2014-2017 Maverick Max X rs 1000R **

** may need to purchase an extended wire kit to reach the battery.

Please Note: will only work with stock bumpers Please Notewill NOT work with the Aluminum front bumper (includes all Maverick ds models and the 2016 Maverick X rs 1000R Turbo)

Features: Black industrial powder coat finish Includes mounting hardware and detailed instructions For use with the standard spool, 4-bolt mounting pattern (3" x 4 7/8")

2016-2018 Yamaha Wolverine R-Spec EPS 2016-2018 Yamaha Wolverine R-Spec

Specs: - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions - For use with the standard(3" x 4 7/8") and wide (3" x 6.67") spool, 4-bolt mounting pattern - WILL work with Terra 45 winches

Fits: - 2014-2019 Viking - Please Note: may require drilling of additional holes in the bumper to accommodate wide spool winches - Please Note: will NOT work with aftermarket Yamaha Bumper: 1XD-F84L0-T0-00 - Please Note: for optimized installation on the Viking 6-seater, an extended wire kit to reach the battery is recommended.