Side by Side Outlet Parts and Accessories
The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.
Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2016-2019 Polaris RZR XP Turbo
- 2018-2019 Polaris RZR Turbo S
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
A cold air intake kit on the Textron Wildcat XX can greatly improve the performance of your vehicle. It is a pretty common practice that a vehicles first modification includes intake, exhaust, and ECU tune. Modifying the Textron with a cold air intake will flow more air than the factory intake by design. This is due to the newly enhanced intake from Agency Power that features a high flow air filter to provide more CFM when the Wildcat needs it most. The factory air box is designed to accommodate the stock power and the everyday Textron driver. Unlike the stock air box or those other flow tubes that just cut the stock air box open, a complete cold air intake is the proper way to gain power without restriction. An intake needs to breathe while filtering out particulates. By removing the Donaldson air box, you are gaining better air flow and dyno proven power even without an ECU flash.
The Agency Power cold air intake has been engineered to be a direct replacement for the factory Textron Wildcat XX intake. Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
After eliminating the heavy and bulky Donaldson filter and air box, the Agency Power intake features an aluminum intake tube that replaces the factory rubber tube. Each aluminum part is powder coated in a matte black for a clean and stylish finish. AP silicone coupler and clamps are included to make the kit an easy bolt-on.
To show the performance of the Agency Power intake, we tested a Textron Wildcat XX back to back keeping all the variables the same except for the intake. On a UTV with a stock tune, the intake made a bolt-on 5 horsepower. Making a simple 5 horsepower is tough to do on any of these UTV’s with bolt-on parts outside of the exhaust and ECU tune. This is because of the much improved air flow over the stock box. Overall, the intake is a great product to add as your first upgrade or during your build to improve power. The Agency Power Textron Wildcat XX Air Intake has been engineered to perfection!
Features:
- High Flow, Reusable Air Filter
- Aluminum Intake Tube
- Black powder coat finish
- Silicone Coupler With Clamps
- Simple Bolt On
- Gain of 5 hp
- Dyno proven results
Notes:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
- View Installation Instructions Here
Fitment:
- 2018+ Textron Wildcat XX
The Agency Power Air Intake System for the Polaris RZR XP 1000 is a great upgrade to help improve air flow from the intake to the engine. Changing to the Agency Power durable silicone couplers, powder coated aluminum tube and upgraded high flow reusable air filter, can be a great benefit over stock. The tube with couplers and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. The easy modification of the Agency Power Air Intake System will help your Polaris RZR XP 1000 breathe better for greater performance.
The Agency Power cold air intake has been engineered to be a direct replacement for the factory Polaris RZR XP 1000 intake. Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The new Agency Power aluminum tube with silicone couplers replaces the factory restrictive plastic intake tube. The silicone coupler and aluminum tube has been designed not only to enhance the performance of your RZR XP 1000 but also an easy installation between the engine and stock air box. Each powder coated black aluminum tube has a smooth inside that helps eliminate any turbulence caused by corrugated tube designing from factory. The intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. The unique filter allows the velocity stack on top of the filter to take full advantage of the RZR air side vent.
Features:
- Aluminum Intake Tube
- Black Powder Coat Finish
- Silicone Coupler With Clamps
- Large 10in High Flow, Re-Usable Air Filter
- Stealth Black Look
- Bolt On
- Easy Installation
Fitment:
- 2014-2019 Polaris RZR XP 1000
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears in our Options
- Understanding cleaning and filter technology – Read Here
The Agency Power Air Intake System for the Polaris RZR 900s | 1000s is a great upgrade to help improve air flow from the intake to the engine. Changing to Agency Power’s durable silicone couplers, powder coated aluminum tube, filter mount, and high flow reusable air filter, this upgrade can be a HUGE benefit. The new tube and filter are designed to replace the factory intake parts but reuse the factory air inlet scoop to provide air flow. The easy modification of the Agency Power Air Intake System will help your Polaris RZR 1000S and 900S breathe better for greater performance.
The Agency Power cold air intake has been engineered to be a direct replacement for the factory Polaris RZR 900S and 1000s intake. Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The new Agency Power aluminum tube with silicone couplers replaces the factory restrictive plastic intake tube. The silicone coupler and aluminum tube have been designed not only to enhance the performance of your RZR S but also be an easy installation between the engine and air filter mount. Each powder coated black aluminum tube has a smooth inside that helps eliminate any turbulence caused by corrugated or collapsed tube designs from factory. The intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. The unique filter mount allows the air filter to take the place of the factory air box but due to the velocity stack on the top of the filter, it still takes full advantage of the RZR air side vent.
Features:
- Aluminum Intake Tube
- Black Powder Coat Finish
- Silicone Coupler With Clamps
- Unique Filter Mount
- Large 12in High Flow, Re-Usable Air Filter
- Stealth Black Look
- Bolt On
- Easy Installation
Fitment:
- 2015-2019 Polaris RZR 900 S
- 2015-2019 Polaris RZR 1000 S
Note:
Features:
- High Flow, Reusable Air Filter
- Precision Cut Intake Plate with Frogzskins
- Black powder coat finish
- Dyno proven results
Features:
- Store personal belongings such as keys, wallet, phone, water, snacks, and many other items
- Constructed of a 1680 denier nylon fabric
- Water resistant material makes upkeep a breeze
- Easily attaches to the center console with ultra-strong velcro fixed to the back of the bag
- Heavy-duty zippers add styling and longevity
- Limited One-Year Warranty
Upgrading the doors on the Can-Am Maverick X3 Max is one of the first mods most people do. This is to prevent debris from hitting you below the half doors that come from the factory. While there are many aluminum door products out there, Agency Power has designed the ultimate door upgrade available! The new Agency Power carbon fiber doors for the Can-Am Maverick X3 are available to fit the rear door of any X3 Max.
These rear doors are a full 1 piece carbon fiber construction designed to fit with the stock upper door metal frames. The doors also use the factory latch mechanism so you can easily open and close the door. The interior of the doors are a black gel coat finish. With the addition of a door bag or pad, the inside of the cockpit is extremely functional like stock. The doors are designed to be lightweight and sturdy to take abuse. The exterior of the doors are a 2x2 carbon fiber weave with a high gloss clear coat finish. Complete the great look by adding the Agency Power matching carbon fiber front doors.
For those wanting to avoid scratches or rock chips, Agency Power recommends having the doors covered in clear bra similar to a car’s front bumper. We also offer a ceramic coating finish that is optional. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber rear doors are a great upgrade to really make you stand out amongst other Can-Am X3 Max owners!
These are rear door sets ONLY. Front door sets are sold separately.
Features:
- Carbon Fiber Construction
- Full Door Protection
- 1 Piece Door Design
- Designed as an OEM Replacement
- 2x2 Carbon Weave
- High Gloss Clear Coat with Interior Black Gel Coat Finish
- Works with Factory Frame and Door Latch
- Lightweight Design
Options:
- Ceramic Coating Available to Keep Up Finish and Improve Durability
Fitment:
- 2017+ Can-Am X3 Max Turbo, X3 Max Turbo R, X3 Max X DS Turbo R, X3 Max X RS Turbo R
Notes:
- Does not include the door frames or hardware. This product is a replacement for the factory plastic and is designed to work with the factory door frames. Lower frames are not required but for the best support, we recommend using the factory Can-Am lower door frames or fabricating some to attach the door too.
Upgrading the doors on the Can-Am Maverick X3 is one of the first mods most people do. This is to prevent debris from hitting you below the half doors that come from the factory. While there are many aluminum door products out there, Agency Power has designed the ultimate door upgrade available! The new Agency Power carbon fiber doors for the Can-Am Maverick X3 are available to fit the 2 door and 4 door X3 Turbo, X3 X DS Turbo R, and the X3 X RS Turbo R. These doors are a full 1 piece carbon fiber construction designed to fit with the stock door metal frames. Even the factory door latch mechanism is retained. The interior of the doors are a black gel coat finish. With the addition of a door bag or pad, the inside of the cockpit is extremely functional like stock. The doors are designed to be lightweight and sturdy to take abuse. The exterior of the doors is a 2x2 carbon weave with a high gloss clear coat finish. For those wanting to avoid scratches or rock chips, Agency Power recommends having the doors covered in clear bra similar to a car’s front bumper or we offer Ceramic Coating optionally. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber doors are a great upgrade to really make you stand out amongst other Can-Am X3 owners!
Sold as FRONT doors only. Rear doors sold separately.
Features:
- Carbon fiber construction
- Full door protection
- Designed as an OEM replacement
- Works with factory frame and door latch
- Lightweight design
Options:
- Ceramic Coating Available to Keep Up Finish and Improve Durability
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 Door
- Will also fit the front of the Can-Am X3 Max
Note:
- Does not include the door frames or hardware. This product is a replacement for the factory plastic and is designed to work with the factory door frames. Lower door frames are recommended for added rigidity.
Get the most stylish doors for your Can-Am Maverick X3 Max with this package from Vivid Racing. The package includes the front and rear Agency Power carbon fiber doors. Upgrading the doors on the Can-Am Maverick X3 is one of the first mods most people do. This is to prevent debris from hitting you below the half doors that come from the factory. While there are many aluminum door products out there, Agency Power has designed the ultimate door upgrade available! These doors are a full 1 piece carbon fiber construction designed to fit with the stock door metal frames. Even the factory door latch mechanism is retained. The interior of the doors are a black gel coat finish. With the addition of a door bag or pad, the inside of the cockpit is extremely functional like stock. The doors are designed to be lightweight and sturdy to take abuse. The exterior of the doors is a 2x2 carbon weave with a high gloss clear coat finish. For those wanting to avoid scratches or rock chips, Agency Power recommends having the doors covered in clear bra similar to a car’s front bumper or we offer Ceramic Coating optionally. The carbon fiber doors are a great upgrade to really make you stand out amongst other Can-Am X3 owners!
Sold as a set of Front and Rear doors.
Features:
- Carbon fiber construction
- Full door protection
- Designed as an OEM replacement
- Works with factory frame and door latch
- Lightweight design
Options:
- Ceramic Coating Available to Keep Up Finish and Improve Durability
Fitment:
- 2017-2019 Can-Am X3 Turbo Max 4 Door
Includes:
- 1 set of AP-BRP-X3-660 carbon fiber front doors
- 1 set of AP-BRP-X3-665 carbon fiber rear doors
Note:
- Does not include the door frames or hardware. This product is a replacement for the factory plastic and is designed to work with the factory door frames. Lower door frames are recommended for added rigidity. You can use the OEM Can-Am ones or fabricate some to work like OEM.
The rear of the Polaris RZR 1000 | RS1 or Turbo is usually visually enhanced by an exhaust system. Some exhausts give you great performance but not a great look. The new Agency Power carbon fiber exhaust shield is a great way to give the back of your Polaris RZR some real style. The full carbon fiber shield is designed as a complete replacement for the factory black plastic unit. It will fit with most aftermarket exhaust systems that use the stock mounting brackets and can fit the stock cover. Because the carbon fiber shield is designed after the factory unit, it will also fit with most OEM style rear bumper bars and cages. The carbon fiber shield is also designed to hold up to the intense heat that the exhaust omits. Working with the stock metal shield, the carbon fiber keeps looking brilliant even after hammering your car around the track or trails. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber scoop is a standard 2x2 weave that has been finished in a high gloss clear coat. The carbon fiber exhaust shield is a great aesthetic part to truly set you apart from other Polaris RZR owners!
Features:
- Carbon fiber construction
- Designed as an OEM replacement
- Lightweight design
Fitment:
- 2014-2018 Polaris RZR XP | XP4 1000 | RS1 or Turbo
The dash on the Polaris RZR 1000 or Turbo is rather bland for the UTV owner who is into highly customizing their vehicle. One way to enhance the look of the dash is with the new Agency Power carbon fiber complete dashboard. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber dash for the RZR 1000 or Turbo is designed as an OEM replacement. It reuses the factory circular gauge cluster and stock switch spots. The carbon fiber dash is a standard 2x2 weave that has been finished in a high gloss clear coat. The carbon fiber dash is extremely lightweight and is the perfect addition to your Polaris RZR.
Features:
- Carbon fiber construction
- Designed as an OEM replacement
- Lightweight design
Fitment:
- 2014-2018 Polaris RZR| 900 Trail/Sport | 1000 XP | XP4 1000 or Turbo with round cluster
Add style to the interior of your Can-Am Maverick X3 with the new Agency Power carbon fiber center console. The center console is a full carbon fiber OEM replacement for the factory black plastic piece. It features cup holders and cutouts for the shifter trim and grab handle. The carbon fiber center console is easy to add additional switches to for lighting or products like our valvetronic exhaust system. The console is a 2x2 carbon weave with a high gloss clear coat finish. As an OEM replacement, it fits in place with the factory push clips and bolts. This front part does fit the 2 door X3 as well as the 4 door X3 Max. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber center console is a great upgrade to make you stand out amongst other Can-Am X3 owners! Other carbon fiber interior and exterior parts coming soon!
Features:
- Carbon fiber construction
- Designed as an OEM replacement
- Lightweight design
- Easy to add extra switches
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 Door
- Will also fit the front of the Can-Am X3 Max
