Side by Side Outlet Parts and Accessories
Includes:
- Shift Knob
- Shift Gate
- Passenger Grab Handle
The Agency Power interior upgrade kit for the Can-Am Maverick X3 was designed with functionality and style in mind. The Maverick X3 has shown extreme versatility with vehicles being used to race, jump through the dunes, or even cruise the trails. No matter the use, it's important to have a superior grip when you need it. While designing the shift knob and grab handle, we added finger grips to establish a more secure feel, whether you're riding with or without gloves.
Each piece is precision CNC machined from a solid block of billet 6061-T6 aluminum to ensure strength without compromise. During the design phase of the gear shift gate, we ensured a precise fit to the factory center console using by 3D scanning the factory console and shift plate. Each gate is cut laser cut and then precision bent from 6061-T6 aluminum to ensure strength without compromise. The interior pieces are each finished with a durable anodized finish and laser engraved with the Agency Power logo.
Includes:
- Shift Knob
- Shift Gate
- Passenger Grab Handle
Features:
- View Install Instructions
- Stylish Design with Laser Etched Agency
- Power Logo and Gear Indicators
- Increased Grip and Tactile Feel
- Increased Durability from the Elements
- Manufactured From 6061-T6 Aluminum
- Easy Direct-Fit Installation
- Anodized Blue, Red or Black
- Includes Mounting Hardware
Fitment:
- Can-Am Maverick X3 2017+
Notes:
The Agency Power interior upgrade kit for the Can-Am Maverick X3 was designed with functionality and style in mind. The Maverick X3 has shown extreme versatility with vehicles being used to race, jump through the dunes, or even cruise the trails. No matter the use, it's important to have a superior grip when you need it. While designing the shift knob and grab handle, we added finger grips to establish a more secure feel, whether you're riding with or without gloves.
Each piece is precision CNC machined from a solid block of billet 6061-T6 aluminum to ensure strength without compromise. During the design phase of the gear shift gate, we ensured a precise fit to the factory center console using by 3D scanning the factory console and shift plate. Each gate is cut laser cut and then precision bent from 6061-T6 aluminum to ensure strength without compromise. The interior pieces are each finished with a durable anodized finish and laser engraved with the Agency Power logo.
Includes:
- Shift Knob
- Shift Gate
- Passenger Grab Handle
Features:
- View Install Instructions
- Stylish Design with Laser Etched Agency
- Power Logo and Gear Indicators
- Increased Grip and Tactile Feel
- Increased Durability from the Elements
- Manufactured From 6061-T6 Aluminum
- Easy Direct-Fit Installation
- Anodized Blue, Red or Black
- Includes Mounting Hardware
Fitment:
- Can-Am Maverick X3 2017+
Notes:
Features:
- Greatly Increased Thermal Efficiency Compared to Stock
- Massive 12"x11"x4" Bar and Plate Core for Maximum Efficiency
- Cast Aluminum End Tanks Add Strength And Durability
- OEM Sized Inlet and Outlet Ensures Comparability With Stock or Aftermarket Intercooler Pipes
- Direct-Fit Replacement, No Cutting Needed
- Compatible with OEM Fan
- Raw Aluminum Finish
Agency Power’s Intercooler Duct Cover for the Can-Am Maverick X3 is a product that all X3 owners will want to be equipped with! This simple design change can greatly benefit your UTV’s performance and efficiency. By design, intercoolers work by taking the air flow from the outside to cool the hot air inside the intercooler parts. Getting more air flow to the intercooler helps with this process. This is why you will see automotive and off-road aftermarket users trimming up bumpers or grills to improve air flow. In the Can-Am X3 intercooled models, the air is directed to the intercooler with a cover that features ducts/scoops right behind the rear seats. These inlets on this cover feed the top side of the intercooler the fresh air it needs. Using the same location and improving the size of scoops Agency Power has created an OEM replacement product that is stylish and a great way to increase air flow to the intercooler.
The Agency Power upgraded intercooler duct cover increases the center scoop from 1.5 inches to 4 inches tall and each side scoop from 1.5 inches to 2 inches with all keeping a 4 inch width. The intercooler duct cover increases the inlet air flow by over 40% from 32 cu in to 46 cu in. Made from a durable ABS plastic similar to the stock unit, it features a smooth black finish. The intercooler duct covers feature the AP logo and are designed to fit over the stock intercooler or the Agency Power intercooler. For those that want to customize further, the cover can be easily primed and painted by your local paint shop. Each kit comes with everything needed to snap into place. If you want to improve how your intercooler works at the track, on the trail, or in the dunes, then you must get the Agency Power Intercooler Duct Cover!
Features:
- ABS Plastic
- Smooth Black Finish
- Finish Allow To Be Primed
- Increases Air Inlet Flow by 40%
- Comes with New Hardware
Fitment:
- 2020+ Can-Am X3 All Models 2 | 4 Door
Features:
- ABS Plastic
- Smooth Black Finish
- Finish Allow To Be Primed
- Increases Air Inlet Flow by 40%
- Comes with New Hardware
Upgrade your Can-Am X3 with 154hp to the 2018+ Can-Am X3 with 172hp using this new fan upgrade from Agency Power. The horsepower upgrade requires a 2018+ Can-Am X3 fuel pump, ECU tune, and this fan. If you are researching this part, you will see you can only buy the intercooler with the fan from the dealer. That is a $675+ part! The OEM manufacture of the fan is by SPAL of Italy. These were directly made for Can-Am to handle the increase in horsepower by using a more powerful electric motor and different fan blade design. This increases the CFM which helps keep the charge temperatures down and the power up! This is an absolutely MUST have for any 2017 Can-Am X3 owner. It can also be used as a direct OEM replacement of the stock one should anything happen to it. Agency Power has put the correct connector on the SPAL fan to make this a 100% plug and play design.
Includes:
- SPAL OEM Can-Am Fan
- Can-Am Plug and Play Connector
Fitment:
- 2017 Can-Am X3 Turbo RS DS
Note:
- Sold as the FAN only! No intercooler included
Upgrading the intercooler or adding an intercooler to the Can-Am X3 120HP and 154HP models is one of the best upgrades and necessary to get the most power from the vehicle. For those that have the 154HP version, the only difference is the fan between the 2018+ 172HP version which you can buy an upgraded one and bolt on. For those that have the non-intercooled version, you could buy the upgraded fan and the Agency Power larger intercooler, but there is no way to bolt them together. Unfortunately Can-Am does not sell just the shroud. Now, Agency Power has our Intercooler Fan Shroud to be used with the stock intercooler or the larger Agency Power intercooler to give you a full bolt-on solution.
The Intercooler Fan Shroud is made of aluminum construction with pem nuts and hardware for easy fan installation. Each shroud is finished in a black powder coat for durability. Shroud mounts to factory intercooler or Agency Power Upgraded Intercooler. The Agency Power Intercooler Fan Shroud combined with an upgraded fan kit will allow you to be able to increase cooling to get the most power out of your Can-Am X3 Turbo.
Features:
- Aluminum Construction
- Powder Coated Black Finish
- Hardware Included to Install to Fan and Intercooler
Fitment:
- 2017 Can-Am X3 RS DS Turbo Models 154HP
- 2018-2019 Can-Am X3 RS DS RC Turbo Models 172HP
- 2018-2019 Can-Am X3 Turbo Models 120HP
Note:
- Agency Power Intercooler and Vivid Racing Upgraded Fan Sold Separately.
- 120HP Can-Am X3 also requires the factory Can-Am X3 Boost Hoses.
Features:
- Lightweight Roto Molded XLPE Plastic Constructed Tubes
- Dual Black Intake Tubes
- Unique Filter Mounting
- High Flow and Re-Usable Air Filters
- Gains of 8-11 Horsepower
- Cross Bar Available in Matte Black, Gloss White and Gloss Red
- Bolt On
- Easy Installation
The Agency Power High Flow Air Intake System for the Polaris RZR RS1 is a great upgrade to help improve air flow from the intake to the engine. Not only does the intake gain very respectable horsepower, it also improves the drivability through the entire RPM range. The air intake kit features a roto-molded plastic tube design that faces towards the rear of the vehicle. Each intake includes a Polaris mesh inspired cross brace and our high flow dry filters. The new intake tubes and filters replace the factory intake system that runs to the roof of the RS1. This new design aids in increased air flow while filtering out more particulates than stock. As tested on the dyno, Agency Power saw a peak gain of 8 horsepower from just the air intake and an 11 horsepower gain with our custom VR Tuned ECU Flash. The easy modification of adding the Agency Power Air Intake System will help your Polaris RZR RS1 breathe better for greater performance. This simple upgrade is a must have for those running aftermarket roll cages and need an air intake solution.
The Agency Power cold air intake has been engineered from the ground up to be a direct replacement for the factory Polaris RZR RS1 intake. Starting from 3D printed components and real world desert testing, each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. The custom high flow Agency Power air filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filters to be purchased separately.
The new Agency Power roto-molded tubes replace the factory intake pipe system. The dual roto-molded plastic tubes have been designed not only to enhance the performance of your RS1 but also an easy installation to replace the factory air intake system. Each tube has a smooth inside that helps eliminate any turbulent air flow. The intake tubes get added support from a cross brace that comes in matte black, gloss white or red. The intake tube is designed to be strong and durable as the factory tube allowing it to hold up to the harsh elements. The dual filters mount uniquely on the intake tubes to grab more air and add great styling.
Features:
- Lightweight Roto Molded XLPE Plastic Constructed Tubes
- Dual Black Intake Tubes
- Unique Filter Mounting
- High Flow and Re-Usable Air Filters
- Gains of 8-11 Horsepower
- Cross Bar Available in Matte Black, Gloss White and Gloss Red
- Bolt On
- Easy Installation
Fitment:
- 2018+ Polaris RZR RS1
Note:
- For maximum performance, order the VR Tuned ECU Flash as well.
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears
- Understanding cleaning and filter technology – Read Here
Replace the filter on your Agency Power intake with our new replacement air filters. More important to the performance is the air filtration. The factory paper mesh filter has to be thrown away and replaced when the time is due. It also easily clogs up with dust and dirt. Agency Power's replacement air filter is designed to replace this factory air filter while still using the stock air box. The custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media have sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides.
These filters are dry and do not require a cleaner or oil re-charger kit. Do NOT OIL our Super-Nano Dry filters. This superior filter is a surface loading filter, to clean them, you simply reverse the airflow. Use 35 psi air pressure and blow your filter out from the inside. Another way to clean the filter is to use a common house-hold shop vacuum with a wand adapter and simply clean the surface of the filter. You will see all the loose contaminants come right off, you may also notice normal discoloration over time. Another feature on the Super-Nano Web filter is, the built in Velocity Stack Adapter, that streamlines the filtered air efficiently into the intake tract. If you will place your hand inside the mouth of the filter you will feel a smooth transition on the inside neck of your filter, this eliminates air turbulence.
To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
Features:
- Direct Replacement for Agency Power Cold Air / Short Ram Intake Systems
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2015+ Polaris RZR 900/S
- 2015+ Polaris RZR 1000/S (NOT XP)
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears Learn More
- Understanding cleaning and filter technology Read Here
Replace the filter on your Agency Power intake with our new replacement air filters. More important to the performance is the air filtration. The factory paper mesh filter has to be thrown away and replaced when the time is due. It also easily clogs up with dust and dirt. Agency Power's replacement air filter is designed to replace this factory air filter while still using the stock air box. The custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media have sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides.
These filters are dry and do not require a cleaner or oil re-charger kit. Do NOT OIL our Super-Nano Dry filters. This superior filter is a surface loading filter, to clean them, you simply reverse the airflow. Use 35 psi air pressure and blow your filter out from the inside. Another way to clean the filter is to use a common house-hold shop vacuum with a wand adapter and simply clean the surface of the filter. You will see all the loose contaminants come right off, you may also notice normal discoloration over time. Another feature on the Super-Nano Web filter is, the built in Velocity Stack Adapter, that streamlines the filtered air efficiently into the intake tract. If you will place your hand inside the mouth of the filter you will feel a smooth transition on the inside neck of your filter, this eliminates air turbulence.
To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
Features:
- Direct Replacement for Agency Power Cold Air / Short Ram Intake Systems
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2018+ Textron Wildcat xx
- Will also fit RZR 900 / 1000 R | xP1000 | xP Turbo by taking filter cover off.
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears Learn More
- Understanding cleaning and filter technology Read Here
