Side by Side Outlet Parts and Accessories

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a set of 12 tri-wing nuts for the hat to hardware.

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a set of 12 tri-wing bolts for the hat to hardware.

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a replacement brake rotor hat.

If you have the Agency Power big brake kit for the Can-Am Maverick X3, these are replacement brake pads for the rear calipers.  These pads are a ceramic compound.

• Rear Caliper
• For big brake kit only
• SOLD PER AXLE

If you have the Agency Power big brake kit for the Can-Am Maverick X3, these are replacement brake pads for the front calipers.  These pads are a Hawk HP+ compound.

• Front Caliper
• For big brake kit only
• SOLD PER AXLE

Nothing is worse than going to start your Can-Am filled with excitement to go riding only to find out your battery is dead. The battery is in an inconvenient spot for jump-starting your X3 which adds to the burden of a dead battery. Agency Power has a simple remote battery terminal kit to alleviate this issue and allow drivers to jump-start their machines with incredible ease. Not only does the Agency Power remote battery terminal kit permit easy jump starting, but also allows for a battery charger to be hooked up.

Moving the seat forward just to have little access to the battery isn't practical when out on a trail or in the dunes. The Agency Power remote terminal kit provides exceptional quality with 4AWG oxygen free copper wiring. EPDM rubber insulates the wiring for a stable connection that can withstand the elements. Both battery cables are capable of handling 140 amps which makes this kit safe to use with a vehicle jump-starting the X3. 100% solid brass terminals provide easy access for cables to attach while resisting corrosion.

Features:

• 4AWG 100% oxygen free copper
• Simplifies process of jump starting or charging your battery
• Solid brass terminals prevent corrosion
• EPDM insulated cables
• Cables are rated for 140A and 600V
• Easy installation

The Polaris RZR XP Turbo can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the RZR XP Turbo even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Polaris RZR XP Turbo or other uses.

The Agency Power Polaris RZR XP Turbo Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.

Features:

• Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
• 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and Has a 5/8 Through Hole
• 0.188" Thick Rolled Steel (11 gauge) Plate
• Stylish Design with Agency Power Logo
• Powder Coated Gloss Red
• Made in the USA

Fitment:

• Polaris RZR XP Turbo 2016+
• Polaris RZR XP 4 Turbo 2016+

The Can-Am Maverick X3 can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the Can-Am X3 even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Can-Am X3 or other uses.

The Agency Power Can-Am X3 Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.

Features:

• View Install Instructions Here
• Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
• 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and has a 5/8 thru hole
• 0.188" Thick Rolled Steel (11 gauge) Plate
• Stylish Design with Agency Power Logo
• Powder Coated Gloss Red
• Made in the USA

Fitment:

• Can-Am Maverick X3 900 2018
• Can-Am Maverick X3 Turbo 2017+
• Can-Am Maverick X3 Turbo R 2017-2019
• Can-Am Maverick X3 X DS Turbo R 2017+
• Can-Am Maverick X3 X DS Turbo RR 2020+
• Can-Am Maverick X3 X RC Turbo 2018+
• Can-Am Maverick X3 X RC Turbo R 2018+
• Can-Am Maverick X3 X RC Turbo RR 2020+
• Can-Am Maverick X3 X RS Turbo R 2017+
• Can-Am Maverick X3 X RS Turbo RR 2020+
• Can-Am Maverick X3 X MR Turbo 2018+
• Can-Am Maverick X3 X MR Turbo R 2018-2019
• Can-Am Maverick X3 X MR Turbo RR 2020+
• Can-Am Maverick X3 MAX Turbo 2017+
• Can-Am Maverick X3 MAX Turbo R 2017+
• Can-Am Maverick X3 MAX X RS Turbo R 2017+
• Can-Am Maverick X3 MAX X RS Turbo RR 2020+
• Can-Am Maverick X3 MAX X MR Turbo R 2019+
• Can-Am Maverick X3 MAX X MR Turbo RR 2020+
• Can-Am Maverick X3 MAX X DS Turbo 2017-2019
• Can-Am Maverick X3 MAX X DS Turbo R 2020+
• Can-Am Maverick X3 MAX X DS Turbo RR 2020+

The Agency Power Silicone Turbo Inlet Charge Tube is a great upgrade for your Polaris RZR Turbo.  The new silicone tube replaces the factory plastic unit that connects to the compressor side of your turbocharger and throttlebody.  The new 3 ply silicone construction is very durable with a smooth design that helps eliminate any turbulence caused by the factory corrugated tube. This enchanced silicone charge tube provides much needed airflow efficiency.  Designed as a simple add-on upgrade that all Polaris RZR Turbo owners will be glad they did.  Agency Power includes an extra vacuum port on the charge tube for those looking to add an aftermarket boost gauge or need to the vacuum source.  Each silicone charge tube includes all clamps and hardware needed for installation.  A CNC machined aluminum MAP sensor port and blow off valve port are included to work with factory components.  Hoses are available in black, red, blue and feature the AP logo.

Features:

• 3 Ply Silicone Construction
• Stealth Black Look
• Simple Bolt On
• Additional Vacuum Port

 Fitment:

• 2016-2018 Polaris RZR XP Turbo
• 2016-2018 Polaris RZR XP4 Turbo
• 2018 Polaris RZR Turbo S

 Note:

• View Install Instructions Here

Th Agency Power Silicone Intake J-Tube for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger.  This new silicone tube replaces the factory plastic intake tube.  The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also a easy installation between the turbo and airbox.  Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs.  The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements.  As a simple add-on upgrade, there is no modifications that need to be done for installation.  Each silicone charge tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components.  The Agency Power silicone J-Tube is available in black, red, or blue and features the AP logo.Features:

• 3 Ply Silicone Construction
• Stealth Black Look
• Simple Bolt On

Fitment:

• 2016-2018 Polaris RZR XP Turbo
• 2016-2018 Polaris RZR XP4 Turbo
• 2018 Polaris RZR Turbo S

Fitment:

• Can-Am Maverick X3 2017+ all models