Side by Side Outlet Parts and Accessories

Riding in the dunes is one of the best activities you can do with your UTV. One issue with riding in the dunes is the Bureau of Land Management (BLM) requires all riders to have safety flags attached to their machine at all times. This means that owners have to attach a whip that extends the flag 8-feet above the ground. The Agency Power universal whip is 5 feet which is within regulation. Most whip options are thin and break constantly which forces owners to repair or purchase new whips. The cheap and flimsy whips offered also don't offer much personalization and make it difficult to identify your machine from afar.

Agency Power combats this issue with customizable LED whips with 168 pre-programmed modes and multiple solid color options. These whips are brighter than the competition thanks to the increased amount of LEDs incorporated into the whip. Bringing a touch of color and personalization allows you to stand out from the rest and be recognized from the whips alone. The Agency Power LED whips are also legal for mounting your flag as required by the BLM.

Features:

• 168 pre-programmed light modes
• Comes with an Agency Power flag for the dunes
• Black anodizing to prevent corrosion
• Laser etched Agency Power logo
• Can be controlled through a downloadable app
• Offers personalization and customization
• Brighter than the competition
• Twice the amount of LEDs per whip
• Follows BLM regulations
• Allows owners to mount their flags
• Limited One-Year Warranty

Notes:

• Agency Power Offers a One-Year Warranty Against Defects or Failures
• Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
• Warranty is Available With Original Invoice Showing Purchase Date

Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.

Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.

The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.

Feautures:

• Spacers are 2-inches wide each
• 4x156 - M12x1.5 - 131mm hub bore
• Improves overall handling of your machine
• Increases the track width
• Provides more aggressive offset and stance
• Durable and light-weight aluminum construction
• Steel lug studs prevent seizing of lug nuts
• CNC machined for precision fitment
• Limited One-Year Warranty

Fitment:

• Polaris RZR 1000 (all)
• Polaris RZR 900 / S / XC 2015+
• Polaris RZR XP Turbo
• Polaris Ranger 900 (all)
• Polaris Ranger 1000 (all)
• Polaris General 1000 (all)
• Kawasaki Mule Pro (all)

Notes:

• Agency Power Offers a One-Year Warranty Against Defects or Failures
• Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
• Warranty is Available With Original Invoice Showing Purchase Date

Features:

• Spacers are 2-inches wide each
• 4x137 - M10x1.25 - 110mm hub bore
• Improves overall handling of your machine
• Increases the track width
• Provides more aggressive offset and stance
• Durable and light-weight aluminum construction
• Steel lug studs prevent seizing of lug nuts
• CNC machined for precision fitment
• Limited One-Year Warranty

Features:

• Polished Intercooler with Cast End Tanks
• Works with factory fan and hoses
• 5% improvement over stock
• Great for Stock or High Powered Cars

Fitment:

• Can-Am Maverick X3 2017+ all models

Can-Am X3 upgrades are endless, but making sure your power plant is operating at peak performance is always crucial to having a great time!  The large hose that connects from your intercooler to your throttle body is the Can-Am Maverick X3 charge tube also known as a boost tube.  There are several reasons why upgrading this tube is important.  The factory tube is rubber and when under pressure, this tube can expand.  Expansion of this tube can alter the pressure and efficiency.  When you are increasing boost pressure, it is common for the factory rubber boost tube to pop off leaving you dead in the dirt until you can reconnect the hose.  This is the same principles that we have applied for years in high performance turbocharged vehicles.

The silicone tube is 5mm thick or 4ply making it extremely strong compared to the OEM tube.  This newly designed boost tube is pressure tested to 85psi meaning it will never fail you for stock or extreme boosted vehicles.  To ensure a very secure system, we supply these boost tubes with high end T-bar clamps.  The upgraded boost tube is designed to work with stock or aftermarket intercoolers.  One main advantage of this tube is we have added a blow off valve port.  The blow off valve port allows you to add a blow off valve to the turbo system which helps alleviate boost pressure from the system when you get on and off the throttle. Any 1 inch flange blow off valve can work such as our own Agency Power vent to atmosphere kit.  Agency Power Boost Tubes come in Black Silicone with the Agency Power Logo.  This boost tube is designed specifically for the Can-Am X3 Turbo RR.

Kit Includes:

• 1 piece long silicone boost tube
• T-Bar Clamps
• Does NOT include blow off valve

Fitment:

• 2020+ Can-Am X3 Turbo RR

Kit Includes:

• 1 piece long silicone boost tube
• T-Bar Clamps
• BOV NOT Included

Upgrade your Polaris RZR XP Turbo injectors with these Agency Power Siemens Deka 80lb injectors. Equivalent to 830cc, these are quite the upgrade from the stock 2016 48lb or 2017 55lb injectors.  This popular injector upgrade used by many tuners worldwide is perfect for those looking to improve the fueling on their RZR Turbo XP.  The injectors are 48mm from end to end which give them the nick name "shorrty" injectors.  They are a direct replacement for the stock injectors.  The high impedance injectors are very linear and controllable at low pulse widths.  This allows you to use a larger injector than normal without hurting your idle or low speed drivability.  These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 26 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.

FEATURES:

• Genuine, reliable Siemens Injectors
• Excellent response characteristics
• Robust Design
• High Impedance
• Low Impedance performance characteristics with High Impedance Compatibility
• Specifications:
• Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
• Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 80 lb/hr = 875 cc/min
• Offset: 0.065ms
• Turn on time @ 14VDC: 1.3ms
• Turn off time: 0.7ms @ 600KPa
• Connector: Bosch EV1
• Series: DEKA 5 ( DEKA V )
• Orifice Type: 8 hole Multi-orifice
• Spray Pattern: 26 Degree Spray Cone
• Factory fitted with Viton upper and lower o-rings
• 48mm end to end

Notes:

• ECU Tuning is Required
• SOLD AS A PAIR
• OEM Part Number - A2C32624700
• View Installation Instructions

When out riding with your friends it can be tough to distinguish one machine from another. Many owners resort to modifying their Can-Am X3 to prevent this, but at night certain features can become invisible. With everyone using bright light bars, each machine seems to blend together at night. The solution for this is Agency Power whip light mounting brackets that easily mount to the rear of the vehicle to allow the use of whip lights

Extending above the machine, whip lights allow people nearby to identify your machine at night and add an extra flair of style. Whether it is a solid color or a flashing pattern, whip lights can be extremely useful when riding at night. In the event of an unforeseen incident, the machine can easily be located and identified from afar with the use of whip lights.

Agency Power makes the daunting task of mounting whip lights easy with our new whip light mount brackets. Simply bolt the heavy-duty stainless steel brackets to the factory roll cage of your X3 and mount your whips! The sturdy stainless steel construction can withstand the hardest of hits while keeping your whips secure. An additional feature of the Agency Power whip light mounting brackets is elongated slots to mount pod lights to the side of your machine. Adding whips and pod lights will help distinguish your machine from others. A bottle opener is also incorporated into the whip bracket for when you get back to the campsite to kick back and relax.

Features:

• Made in the USA!
• Heavy-duty laser cut stainless steel construction
• Allows easy installation of whip lights
• Elongated slots offer pod light mounting
• Laser etched Agency Power logo
• Black powder coat finish to protect against corrosion
• Integrated bottle opener for after the ride

Fitment:

• Can-Am Maverick X3 2017+

Notes:

• Sold Individually
• View Installation Instructions Here

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a replacement rotor for the front or rear right side

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a replacement rotor for the front or rear left side.  The rotor reuses the aluminum hat and hardware.  The nuts on the 2 piece hardware can be reused up to 3 times.  Should you need the aluminum hat or hardware, please contact us.

• Left Side
• Front or Rear
• 12x.810"
• Vented, directional, slotted, drilled, zinc coated
• For big brake kit only
• Sold individually

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is the tool needed to take apart the rotor and hat tri-wing hardware.

• For Agency Power big brake kit only