Side by Side Outlet Parts and Accessories
Fitment:
- 2017-2018 Can-Am Maverick X3, every model
- 2013-2018 Can-Am Maverick, every model
- 2011-2018 Can-Am Commander, every model
- 2008-2018 Can-Am Renegade, every model
- 2006-2018 Can-Am Outlander, every model
- All Years - Can-Am Defender, every model
- 2018 Can-Am Traxter, every model
- ALL Can-Am UTV's and ATV's from 2007 to 2020 (not 2018's with Smart Lok, or 2020+ European Models with Brake Traction Control, "BTC")
Applicability: 2014+ Polaris RZR (excludes Polaris RZR RS1, RZR 170 and RZR PRO XP models)
Features:
- Designed to be a replacement for your plastic seat base
- Compatible with stock RZR slider
- Allows you to use your 570/800/XP900 seats in a newer XP 1000 or S 900 and vice versa
- Includes seat bases and latch housing (no latch spring or handle)
- Weight: 9 lbs
- Dimensions per mount: 15 in x 12 in x 4 in
Features:- Direct replacement for the OEM Polaris plastic valve
- Tested to 500+ horsepower
- Billet anodized aluminum construction with high temperature sealing rings
- Does not stick like the OEM valve is prone to
- Has the “Blow Off Valve” sound that turbo customers crave
- Includes a pre filter to keep dirt/sand out of the valve
- Adding harnesses to any recreational vehicle gives the occupants the opportunity to focus on the ride, not on holding themselves in place, but when the factory seats are taller than the person sitting in it, the harness is less effective and in some cases uncomfortable. The DragonFire Harness Pass-Through Bezel is designed to prevent harnesses from falling off a riders shoulders and allow harnesses to be placed lower down for better fitment. Take the focus off your harnesses and enjoy your ride.
- Designed for Polaris OEM Seats.
- Easy to install.
- Provides clean and finished look.
- Allows for use of 4 or 5 point harnesses.
The A.T. Hotbox is plumbed into the motor’s cooling system. As the motor runs, it heats the element inside to temperatures hot enough to warm and even cook food safely. Our specially designed mounting brackets make it easy to safely and securely fasten your A.T. Hotbox. For other models, use the four 1/4 20 rivnuts already secured in the bottom of the A.T. Hotbox.
Nearly any type of cooking product you have in your kitchen drawer can be used in the A.T. Hotbox. There’s no need for special cookware for the hotbox to warm or cook food. Recommended to not cook food directly in pan – sandwich bags (freezer bags are suggested as they are thicker), Tupperware containers, parchment paper (wrapping bread to prevent sogginess), and aluminum foil (do not wrap food directly – wrap around parchment paper).
Average cook/heating time is about 2 – 2 1/2 hours. Cook raw meat such as chicken breast, stew meat, prime rib roast, boneless pork spare ribs, new york steak and taco meat. Warm up left overs, corndogs, brats, lasagna, hot chocolate, burritos – almost any item you can pull from the grocery store shelf that you would heat up or cook at home.
Vehicle Specific Mounts sold separately - please call.
Please note: Bimini Roof with sun visor or Sport Roof needed for installation (sold separately)
- Weather-resistant bags
- Hold your gear safely and securely while riding
- Includes 2 overhead soft bags mounted on a tubular frame that sits between cage and roof
- 2.4 Gal (9L) total capacity
- Sold as pair
LiteSPOTs LED spotlights were designed to be a low profile under chassis light, a rock light.
LiteSPOTs are 3 high power LEDs embedded in a clear resin housing to deliver a water and corrosion proof package that delivers a wide beam of bright light, with a 4-6 foot focal range. They are not designed as backup or driving lamps. The LiteSPOTs include a neodymium magnet encased in the resin, providing for easy “stick on” mounting to any metallic surface. There is also a thru hole drilled in each one and a supplied self tapping screw to allow for installation on non-ferrous surfaces.
Each LiteSPOT measures 1 3/8″ in diameter and 5/8″ thick. Each LiteSPOT comes with 24″ of 2 conductor 22 gauge wire attached and each unit draws approximately 120 milliamps.
This Slip-On Muffler for the Polaris XP 900 RZR delivers an additional 4.2 horsepower with well over double the air flow compared to the stock silencer. This translates into a substantial performance increase and better throttle response. Its stainless steel construction provides excellent strength and durability. The sound level measures 95.5 DB (@ 4200 RPM) using the SAE J1287 sound test. It also features a spark arrestor that can be added for trail use.
Fuel controller not required.
This is the same muffler found on the 2013 Polaris Jagged X.
CLEARANCE! While supplies last!
Fits any RZR 570/800/900XP (not trail).
Pro Armor All Aluminum doors are an industry standard. These doors are direct bolt on to your Pro XP and install in minutes. The bolt on door utilizes the OEM Paddle latch and there is absolutely no rattle with these doors. Installation is easy and the doors allow for plenty of adjustment. Our doors feature a reverse hinge system which makes getting in and out of your Pro XP much easier. The doors open almost a full 180. Doors offered in all 2020 Pro XP Polaris signature colors.
Matching graphics kit as pictured available, click HERE.
Looking for graphics to complete the look on your 2020 RZR® Pro XP and color ways for your Pro Armor® RZR® Pro XP Doors and side panels. Look no further to a color and theme matched white/blue graphics kit. Consists of a white/blue color scheme this graphic kit will match the colors on your white/blue RZR® Pro XP. Made from 3M brand vinyl and backing for a strong application and withstand elements and fade.
This Graphic Kit only fits Pro Armor "Pro XP" doors 2020 model vehicle found by clicking HERE.
Features:
- Weather-resistant semi-rigid bag, holds your gear safely and securely while riding.
- Bag attaches in unused space between the seats to increase your vehicle's cargo capacity.
- 2.8 Gal (10.5L) capacity.
- Not compatible with Aftermarket Seats
Fitment:
- 2018+ Maverick Trail, Maverick Sport, Maverick Sport Max
- 2021+ Commander all models
