Side by Side Outlet Parts and Accessories
Wanna know the easiest way to pick up just under 5hp @ 8000 RPM on acceleration?? The High-Performance Flywheel you are currently reading about for the Yamaha YXZ 1000R!
WORKS WITH BOTH MANUAL AND SPORT SHIFT MODELS!!!
This filter clamps on for a more secure connection than the stock slip on air filter. Desertcraft has developed this filter for severe duty. This filter comes with an optional bracket to better secure and support the filter in the air box. The Desertcraft filter meets or exceeds in every category over the competition in this segment and it has the advantage of being serviceable. You will definitely save in the long run over one time use, throwaway filters. The specialty filter media is highly durable and has an efficiency rating that far exceeds the stock element (exceeds %). TheDesertcraft filter is a dry element that requires no special cleaner or oil to service. It is serviceable !!!! ?To service the filter you simply blow it out from the clean side with compressed air or vacuum from the dirty side. The filter can be soaked in a soapy solution rinsed and air dried too.
If you have the Agency Power big brake kit for the Can-Am Maverick X3, these are replacement brake pads for the front calipers. These pads are a Hawk HP+ compound.
- Front Caliper
- For big brake kit only
- SOLD PER AXLE
If you have the Agency Power big brake kit for the Can-Am Maverick X3, these are replacement brake pads for the rear calipers. These pads are a ceramic compound.
- Rear Caliper
- For big brake kit only
- SOLD PER AXLE
The new Agency Power billet aluminum wastegate is the perfect upgrade for your Can-Am X3 turbocharger. The new wastegate features a 1bar spring housed in an 85mm body. This design allows you to easily change springs and service the wastegate if needed. As a direct bolt-on to your factory turbo, the wastegate features an adjustable rod for those that would like to set your crack pressure specifically to your build. Perfect for those looking to get better boost response out of the stock tune, an ECU flashed car, or even a turbo upgrade.
Doing a back to back dyno test, we show how the wastegate improves boost response and performance over the stock wastegate. Set at 1 full turn in from neutral, the new Agency Power billet wastegate holds 1 psi more than stock gaining you 4hp.
Features:
- Billet Aluminum Design
- Direct Bolt On
- Adjustable Rod
- Stiffer Spring
Notes:
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 | 4 Door
Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.
Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.
The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.
Feautures:
- Spacers are 2-inches wide each
- 4x156 - M12x1.5 - 131mm hub bore
- Improves overall handling of your machine
- Increases the track width
- Provides more aggressive offset and stance
- Durable and light-weight aluminum construction
- Steel lug studs prevent seizing of lug nuts
- CNC machined for precision fitment
- Limited One-Year Warranty
Fitment:
- Polaris RZR 1000 (all)
- Polaris RZR 900 / S / XC 2015+
- Polaris RZR XP Turbo
- Polaris Ranger 900 (all)
- Polaris Ranger 1000 (all)
- Polaris General 1000 (all)
- Kawasaki Mule Pro (all)
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.
Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.
The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.
Feautures:
- Spacers are 2-inches wide each
- 4x156 - M12x1.5 - 131mm hub bore
- Improves overall handling of your machine
- Increases the track width
- Provides more aggressive offset and stance
- Durable and light-weight aluminum construction
- Steel lug studs prevent seizing of lug nuts
- CNC machined for precision fitment
- Limited One-Year Warranty
Fitment:
- Polaris RZR 1000 (all)
- Polaris RZR 900 / S / XC 2015+
- Polaris RZR XP Turbo
- Polaris Ranger 900 (all)
- Polaris Ranger 1000 (all)
- Polaris General 1000 (all)
- Kawasaki Mule Pro (all)
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
Features:
- Store personal belongings such as keys, wallet, phone, water, snacks, and many other items
- Constructed of a 1680 denier nylon fabric
- Water resistant material makes upkeep a breeze
- Easily attaches to the door frame with ultra-strong velcro straps
- Heavy-duty zippers add styling and longevity
- Limited One-Year Warranty
Features:
- CNC Machined Aluminum Constructions
- Anodized Black
- Adjustable
- Pro Longs Turbocharge Life
- Great Blow Off Valve Sound!
Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.
Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.
The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.
Features:
- Spacers are 2-inches wide each
- 4x137 - M10x1.25 - 110mm hub bore
- Improves overall handling of your machine
- Increases the track width
- Provides more aggressive offset and stance
- Durable and light-weight aluminum construction
- Steel lug studs prevent seizing of lug nuts
- CNC machined for precision fitment
- Limited One-Year Warranty
Fitment:
- Can-Am Commander / Max
- Can-Am Maverick / Max (NOT X3)
- Can-Am Defender / Max
- Kawasaki Mule 500/520/550/600
- Kawasaki Mule 2010/2020/2030
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
Universal roll cage bag
THIS WILL FIT A 1 5/8" TO 2" ROLL BAR
-The roll cage bag you can attached to any part of your UTV roll cage -Great for all the extras that you never want to use but always glad you have - Quality craftsmanship zipper made to stand up to what every your kids can through at it. -Made of all Black carbon fiber vinyl
KRYPTONITE POLARIS RZR STEERING RACK HEIM JOINT CONVERSION 2014-2021 XP […]
