Side by Side Outlet Parts and Accessories

Features:

• Black Intercooler with Cast End Tanks
• Works with factory fan and hoses
• 5% improvement over stock
• Great for Stock or High Powered Cars
• View Installation Instructions Here

Upgrading the intercooler or adding an intercooler to the Can-Am X3 120HP and 154HP models is one of the best upgrades and necessary to get the most power from the vehicle.  For those that have the 154HP version, the only difference is the fan between the 2018+ 172HP version which you can buy an upgraded one and bolt on.  For those that have the non-intercooled version, you could buy the upgraded fan and the Agency Power larger intercooler, but there is no way to bolt them together.  Unfortunately Can-Am does not sell just the shroud. Now, Agency Power has our Intercooler Fan Shroud to be used with the stock intercooler or the larger Agency Power intercooler to give you a full bolt-on solution.

The Intercooler Fan Shroud is made of aluminum construction with pem nuts and hardware for easy fan installation. Each shroud is finished in a black powder coat for durability. Shroud mounts to factory intercooler or Agency Power Upgraded Intercooler. The Agency Power Intercooler Fan Shroud combined with an upgraded fan kit will allow you to be able to increase cooling to get the most power out of your Can-Am X3 Turbo.

Features:

• Aluminum Construction
• Powder Coated Black Finish
• Hardware Included to Install to Fan and Intercooler

 Fitment:

• 2017 Can-Am X3 RS DS Turbo Models 154HP
• 2018-2019 Can-Am X3 RS DS RC Turbo Models 172HP
• 2018-2019 Can-Am X3 Turbo Models 120HP

Note:

• Agency Power Intercooler and Vivid Racing Upgraded Fan Sold Separately.
• 120HP Can-Am X3 also requires the factory Can-Am X3 Boost Hoses.

Features:

• Spacers are 2-inches wide each
• 4x137 - M10x1.25 - 110mm hub bore
• Improves overall handling of your machine
• Increases the track width
• Provides more aggressive offset and stance
• Durable and light-weight aluminum construction
• Steel lug studs prevent seizing of lug nuts
• CNC machined for precision fitment
• Limited One-Year Warranty

Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.

Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.

The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.

Features:

• Spacers are 2-inches wide each
• 4x137 - M10x1.25 - 110mm hub bore
• Improves overall handling of your machine
• Increases the track width
• Provides more aggressive offset and stance
• Durable and light-weight aluminum construction
• Steel lug studs prevent seizing of lug nuts
• CNC machined for precision fitment
• Limited One-Year Warranty

Fitment:

• Can-Am Commander / Max
• Can-Am Maverick / Max (NOT X3)
• Can-Am Defender / Max
• Kawasaki Mule 500/520/550/600
• Kawasaki Mule 2010/2020/2030

Notes:

• Agency Power Offers a One-Year Warranty Against Defects or Failures
• Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
• Warranty is Available With Original Invoice Showing Purchase Date

Fitment:

• Pre-Filter 5 1/2” Enclosed Top Tapers 6” Bottom x 5" Tall
• Agency Power Polaris RS1 Intake Filters

Fitment:

• Pre-Filter 4 ½” x 7” Oval Enclosed Top Tapers 5 ¾” x 9” Bottom x 4" Tall
• Agency Power Can-Am Maverick X3 Turbo Cold Air Intake Kit Filter

Fitment:

• Pre-Filter 5 1/2” Enclosed Top Tapers 6” Bottom x 5" Tall
• Agency Power Yamaha YXZ Supercharger Filter

Kit Includes:

• 1 piece long silicone boost tube
• T-Bar Clamps
• BOV NOT Included

Can-Am X3 upgrades are endless, but making sure your power plant is operating at peak performance is always crucial to having a great time!  The large hose that connects from your intercooler to your throttle body is the Can-Am Maverick X3 charge tube also known as a boost tube.  There are several reasons why upgrading this tube is important.  The factory tube is rubber and when under pressure, this tube can expand.  Expansion of this tube can alter the pressure and efficiency.  When you are increasing boost pressure, it is common for the factory rubber boost tube to pop off leaving you dead in the dirt until you can reconnect the hose.  This is the same principles that we have applied for years in high performance turbocharged vehicles.

The silicone tube is 5mm thick or 4ply making it extremely strong compared to the OEM tube.  This newly designed boost tube is pressure tested to 85psi meaning it will never fail you for stock or extreme boosted vehicles.  To ensure a very secure system, we supply these boost tubes with high end T-bar clamps.  The upgraded boost tube is designed to work with stock or aftermarket intercoolers.  One main advantage of this tube is we have added a blow off valve port.  The blow off valve port allows you to add a blow off valve to the turbo system which helps alleviate boost pressure from the system when you get on and off the throttle. Any 1 inch flange blow off valve can work such as our own Agency Power vent to atmosphere kit.  Agency Power Boost Tubes come in Black Silicone with the Agency Power Logo.  This boost tube is designed specifically for the Can-Am X3 Turbo RR.

Kit Includes:

• 1 piece long silicone boost tube
• T-Bar Clamps
• Does NOT include blow off valve

Fitment:

• 2020+ Can-Am X3 Turbo RR

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a replacement rotor for the front or rear right side

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a replacement rotor for the front or rear left side.  The rotor reuses the aluminum hat and hardware.  The nuts on the 2 piece hardware can be reused up to 3 times.  Should you need the aluminum hat or hardware, please contact us.

• Left Side
• Front or Rear
• 12x.810"
• Vented, directional, slotted, drilled, zinc coated
• For big brake kit only
• Sold individually

If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is the tool needed to take apart the rotor and hat tri-wing hardware.

• For Agency Power big brake kit only