Side by Side Outlet Parts and Accessories
Built with reinforced plactic back wall for stability, it has a large main zipper pocket with additional storage inside. Made of water-repellent material and heavy-duty hardware. Designed to fit securely onto the RZR door frame utilizing the existing door bolts. These are made specificaly for driver and passenger door so you must specify when ordering. Made in USA!
Fitment
- 2017-2021 Can-Am Defender H8 and HD10
Best BRP Belt on the Market!!!
- Made in the USA - Hunterworks belts are Made in the USA. These belts are engineered to meet or exceed OE standards.
- Long Service Life - Made from a proprietary construction application, these drop-in belts require no clutching adjustments and have a minimal stretch effect under load for consistent shifting
- 1% Warranty Rate - These belts can sport the title of having a less than 1% failure rate! That's because these belts are purpose-built to handle the unique demands of harsh CVT applications
- Huge Compatibility - Don't quote us, but BRP uses the same dimensioned belt on a ton of vehicles. It pretty much covers everything from a 800cc UTV to the Maverick X3. So what HW did was take BRP's OE dimensions, use their proven construction technique and make these belts.
- Common Sense 1 Year Warranty - We'll get down to what the warranty covers; As long as you didn't purposely try to blow your belt up, install it on the wrong UTV, install it incorrectly or have other clutch issues, we will replace the belt with a new belt. In the end these belts cost less money than the OEM belts and have a warranty where the OEM does not.
Fitment
- 2017-2021 Can-Am Maverick Trail and sport models 800/1000
Best BRP Belt on the Market!!!
- Made in the USA - Hunterworks belts are Made in the USA. These belts are engineered to meet or exceed OE standards.
- Long Service Life - Made from a proprietary construction application, these drop-in belts require no clutching adjustments and have a minimal stretch effect under load for consistent shifting
- 1% Warranty Rate - These belts can sport the title of having a less than 1% failure rate! That's because these belts are purpose-built to handle the unique demands of harsh CVT applications
- Huge Compatibility - Don't quote us, but BRP uses the same dimensioned belt on a ton of vehicles. It pretty much covers everything from a 800cc UTV to the Maverick X3. So what HW did was take BRP's OE dimensions, use their proven construction technique and make these belts.
- Common Sense 1 Year Warranty - We'll get down to what the warranty covers; As long as you didn't purposely try to blow your belt up, install it on the wrong UTV, install it incorrectly or have other clutch issues, Hunterworks will replace the belt with a new belt if oyu contact them directly. In the end these belts cost less money than the OEM belts and have a warranty where the OEM does not.
- Heavy duty construction offers a significantly smoother ride over rough trails.
- Extra lugs on the shoulder protect the sidewall and rim.
- Tire is suitable for desert, dirt, rock, mud and snow applications.
- 6-ply rating for optimum puncture resistance.
Can Am Maverick X3 2 Seat Roll Cage with Detachable Rear Bumper Kit
Building a new 2 seat rollcage for your Can-Am Maverick X3? We have put together this kit to make fabbing easy for you.
Fits Can Am Maverick X3:
Turbo-Turbo R-X DS Turbo R- X RS Turbo R- Max
AGM’s uni-ball tool’s compact size and easy operation allows you […]
Each Kit Features:
- Extended length brake lines
- Multi-layer design
- Braided stainless steel
- Made in the USA
The Polaris RZR XP Turbo and Turbo S can take the factory drive belt to its limit with performance upgrades and hard driving. Knowing that the drive belt is a critical piece to your Polaris RZR Turbo, Agency Power now has this upgraded performance drive belt. The new Agency Power Drive Belt has a double notch design that is a direct replacement for the OEM Polaris belt. Each belt uses a Kevlar fiber construction to give the belt more strength, along with better chemical and heat resistance. As a direct factory replacement belt, installation is the same with the upgraded Agency Power performance belt. Now you can ride with confidence to deliver the power you want to the ground and keep your weekends going!
Features:
- Kevlar Reinforced
- Double Notch Design
- Factory Replacement
- Stronger and More Chemical Resistant
- Replaces OEM Part Number:
- 3211186
- 3211202
Fitment:
- 2016-2019 Polaris RZR XP Turbo and XP4 Turbo
- 2018-2019 Polaris RZR XP Turbo S and XP4 Turbo S
- 2018-2019 Polaris RZR RS1
- 2018-2019 Polaris Ranger XP 1000
- 2019 Polaris Ranger Crew XP 1000
Note:
- Proper belt break-in:
- Vary your speed and engine RPM to allow belt to shift through normal operational range
- During the first 30 miles of installation do not exceed ¾ throttle
- Every 15 minutes of use stop engine and allow belt to cool down
- Avoid the following activities during break-in:
- Aggressive acceleration or jerky throttle at low speeds
- Holding speed or RPM constant for extended time periods
- Pulling heavy loads
- Excessive driving without CVT/belt cool down
The Agency Power Premium Grill is a stylish addition to your Polaris RZR Turbo or 1000. The replacement grill is constructed from an inner and outer assembly that has been precision cut out of stainless steel. The outer grill is powder coated in a textured black and features the Agency Power AP logo in the bottom center. The inner grill has been designed to be slightly offset of the outer grill to show off the brilliant color and make the AP logo pop. These are also powder coated for a durable finish in several colors. These 2 pieces are held together with rivets which give it that industrial look. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- Yellow Accents
- Precision cut stainless steel
- Two tone high quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 | XP4 1000 2014-2018
- Polaris RZR XP Turbo | XP4 Turbo 2016
The Agency Power Premium Grill is a stylish addition to your Polaris RZR Turbo or 1000. The replacement grill is constructed from an inner and outer assembly that has been precision cut out of stainless steel. The outer grill is powder coated in a textured black and features the Agency Power AP logo in the bottom center. The inner grill has been designed to be slightly offset of the outer grill to show off the brilliant color and make the AP logo pop. These are also powder coated for a durable finish in several colors. These 2 pieces are held together with rivets which give it that industrial look. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- White Accents
- Precision cut stainless steel
- Two tone high quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 | XP4 1000 2014-2018
- Polaris RZR XP Turbo | XP4 Turbo 2016
The Agency Power Premium Grill is a stylish addition to your Polaris RZR Turbo or 1000. The replacement grill is constructed from an inner and outer assembly that has been precision cut out of stainless steel. The outer grill is powder coated in a textured black and features the Agency Power AP logo in the bottom center. The inner grill has been designed to be slightly offset of the outer grill to show off the brilliant color and make the AP logo pop. These are also powder coated for a durable finish in several colors. These 2 pieces are held together with rivets which give it that industrial look. The grill easily fits into place of the stock unit with its tab design for a secure fit.
Features:
- Silver Accents
- Precision cut stainless steel
- Two tone high quality powder coat finish
- OEM fit and finish
Notes:
Fitment:
- Polaris RZR XP 1000 | XP4 1000 2014-2018
- Polaris RZR XP Turbo | XP4 Turbo 2016
