Side by Side Outlet Parts and Accessories
The Polaris RZR XP Turbo exhaust system can be one of the best performance modifications you can do. Like most turbocharged vehicles, backpressure is not a requirement. A turbo is at its peak performance with no restrictions right out of the turbo exhaust housing. Where this is common on racecars, normal use can become unbearable. Cruising forest trails or high traveled roads could be deafening loud and not the most PC way to ride. However, you can have the best of both worlds with an Agency Power valvetronic exhaust system.
Agency Power has been manufacturing valvetronic exhausts for vehicles since 2008. A valvetronic exhaust features a remote operated valve that can be opened and closed at the push of a button. This allows you to redirect the exhaust flow which changes the exhaust sound. On most vehicles, when the valve is closed, the exhaust gases are routed through a muffler to give you a more subtle tone. When the valve is open, the exhaust gases typically bypass the muffler system for a straight restriction free path. The end goal is to give you all the power and performance!
Some exhaust systems feature a valve after the muffler which blocks one of the tip exits to slightly quiet the tone. This may change the sound by a few decibels, but is still very restrictive. The exhaust flow going through the chamber muffler is not giving your turbocharger any additional performance between the modes. To really get the most performance and sound, you want to put the valve before the muffler. This design drastically changes the sound of your RZR XP Turbo. With the valve open, the straight exit exhaust will build boost faster giving you the jump on your competition. The turbo spool is noticeably faster allowing you to gain peak performance sooner.
The Agency Power valvetronic exhaust for the Polaris RZR XP Turbo is made here in Arizona, USA. It is constructed of T304 stainless steel that has been hand TIG welded using proven JIGs and vehicle testing. The exhaust mounts directly to the turbo pipe with a thick 3 bolt flange. A beautiful merge splits between the chambered Magnaflow muffler and the exhaust valve. The muffler was spec’d to provide a sporty tone when the valve is closed. Exiting each side of the muffler is a straight cut 2.50 inch turn down exhaust tip with holes to install a spark arrestor. With 2 tips, you can reuse your existing spark arrestor and optionally purchase 1 or 2 from us as needed. The included remote components operate the butterfly valve via a vacuum solenoid. The solenoid is tapped into a vacuum source on the RZR XP Turbo engine which opens and closes the valve with the remote key fob. The key fob sends the signal to a remote box which controls the solenoid. The remote box is sealed however it is recommended to be installed in an area not prone to water.
Each system includes a new Agency Power exhaust shield. The exhaust shield is precision water jetted out of stainless steel feature the AP logo and a unique design element. The heat shield is designed specifically for this exhaust system. The exhaust mounts to factory hanger and bracket positions. This system is a complete bolt-on installation and does not require any cutting, welding, or other exhaust modification. The exhaust features a bung for the factory O2 sensor. Additional O2 bungs can be welded on for those running aftermarket AFR gauges.
Features:
- Valvetronic Dual Tone Sound
- Includes Remote Key FOBs
- Uses Magnaflow Muffler
- Stainless Steel Construction
- Allows for Use of Spark Arrestors
- Included AP Logo Heat Shield
- Available in RAW Stainless or Black Coated
Notes:
- Exhaust may be made to order taking 2-4 weeks
- Remote electronic box should be mounted in a water tight area
- Electronic module requires power and ground wiring
- View Installation Instructions Here
Fitment:
- Polaris RZR XP Turbo 2016-2021
- Polaris RZR XP4 Turbo 2016-2021
The Polaris RZR Turbo needs an exhaust system to help the turbocharger flow freely and improve performance. Agency Power has created the best exhaust system that is a simple plug and play for the RZR XP Turbo platform. The twin tip, side exit exhaust was designed to balance exhaust flow without causing obnoxious noise over the factory unit. The system is built from T304 stainless steel and features precision TIG welds. The dual high flow resonators are secured in place with a laser cut cradle that features the AP logo. The type of resonators used can be seen in many of the Agency Power high performance vehicle exhausts, which on turbo cars, produce a beautiful sound. Designed as a direct replacement, the Agency Power exhaust uses the factory hanger locations and bolts up to the stock turbo pipe without modifications. The exhaust features a thick flange and includes a new gasket with hardware. Each tip outlet has been designed to work with spark arrestors that can be optionally purchased. The final product is completely polished for a show finish giving the rear end of the RZR Turbo a sexy look with a satisfying sound. As tested on our Mustang Dyno, the exhaust gained about 5-6 peak horsepower over stock. Even more important testing was proven when XTC Power Sports ran this exhaust system on their 2017 competition vehicle during the grueling 500+ mile Vegas to Reno race. The exhaust is a great addition to any RZR XP Turbo along with our other Agency Power Polaris accessories.Features:
- Polished Stainless Steel Constructions
- Precision TIG Welding
- Clean and Satisfying Sound
- Direct Bolt-On
- Can be used with Spark Arrestors
- Race Proven
Fitment:
- Polaris RZR XP Turbo 16-18
- Polaris RZR XP4 Turbo 16-18
Adding a vent to atmosphere Blow Off Valve on the Polaris RZR turbo system is a great way to improve throttle response and hear that awesome blow off valve turbo sound. With an ECU tune and higher boost levels, the Polaris RZR can gain 10-15% more power over stock. However the stock plastic diverter valve is ill equipped to handle this increase. One option is to replace this valve with an aftermarket diverter valve like Agency Power also offers. But for those that want to hear the whoooosh sound, there is this adjustable vent to atmosphere blow off valve! The purpose of a BOV is not just to sound cool, but it is designed to release the pressure that is built up in the charge side of the system. The factory diverter valve system dumps this pressure back down into the intake pipe. This can cause turbulence to the impeller, slowing the spool of the turbo down and causing premature wear.
The Agency Power blow off valve for the Polaris RZR can be used in conjunction with the stock turbo inlet pipe or any aftermarket turbo hose pipe that has a 1 inch BOV flange. Since the factory valve is a diverter valve and this new valve is designed to be 100% vent to atmosphere, we include a high-temp push on plug cover for the eliminated return hose. Each Agency Power valve is machined from 6061 billet aluminum then anodized in a stealth black finish. The top is laser engraved with the Agency Power cursive logo and directions for adjusting. When the top of the valve rotates, this allows you to adjust the spring tension for your application. You can set the valve to easily vent off pressure or be stiffer to only vent at maximum PSI.
Features:
- CNC Machined Aluminum Constructions
- Anodized Black
- Adjustable
- Pro Longs Turbocharge Life
- Great Blow Off Valve Sound!
Notes:
- View Installation Instructions
- Includes Fitting Kit
Fitment:
- 2016-2019 Polaris RZR Turbo 2 | 4 Door
The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.
Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2016-2019 Polaris RZR XP Turbo
- 2018-2019 Polaris RZR Turbo S
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.
Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2016-2019 Polaris RZR XP Turbo
- 2018-2019 Polaris RZR Turbo S
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
Th Agency Power Silicone Intake J-Tube for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. This new silicone tube replaces the factory plastic intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also a easy installation between the turbo and airbox. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there is no modifications that need to be done for installation. Each silicone charge tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue and features the AP logo.Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Th Agency Power Silicone Intake J-Tube for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. This new silicone tube replaces the factory plastic intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also a easy installation between the turbo and airbox. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there is no modifications that need to be done for installation. Each silicone charge tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue and features the AP logo.Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Th Agency Power Silicone Intake J-Tube for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. This new silicone tube replaces the factory plastic intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also a easy installation between the turbo and airbox. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there is no modifications that need to be done for installation. Each silicone charge tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
The Agency Power Silicone Turbo Inlet Charge Tube is a great upgrade for your Polaris RZR Turbo. The new silicone tube replaces the factory plastic unit that connects to the compressor side of your turbocharger and throttlebody. The new 3 ply silicone construction is very durable with a smooth design that helps eliminate any turbulence caused by the factory corrugated tube. This enchanced silicone charge tube provides much needed airflow efficiency. Designed as a simple add-on upgrade that all Polaris RZR Turbo owners will be glad they did. Agency Power includes an extra vacuum port on the charge tube for those looking to add an aftermarket boost gauge or need to the vacuum source. Each silicone charge tube includes all clamps and hardware needed for installation. A CNC machined aluminum MAP sensor port and blow off valve port are included to work with factory components. Hoses are available in black, red, blue and feature the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
- Additional Vacuum Port
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Note:
The Agency Power Silicone Turbo Inlet Charge Tube is a great upgrade for your Polaris RZR Turbo. The new silicone tube replaces the factory plastic unit that connects to the compressor side of your turbocharger and throttlebody. The new 3 ply silicone construction is very durable with a smooth design that helps eliminate any turbulence caused by the factory corrugated tube. This enchanced silicone charge tube provides much needed airflow efficiency. Designed as a simple add-on upgrade that all Polaris RZR Turbo owners will be glad they did. Agency Power includes an extra vacuum port on the charge tube for those looking to add an aftermarket boost gauge or need to the vacuum source. Each silicone charge tube includes all clamps and hardware needed for installation. A CNC machined aluminum MAP sensor port and blow off valve port are included to work with factory components. Hoses are available in black, red, blue and feature the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
- Additional Vacuum Port
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Note:
The Agency Power Silicone Turbo Inlet Charge Tube is a great upgrade for your Polaris RZR Turbo. The new silicone tube replaces the factory plastic unit that connects to the compressor side of your turbocharger and throttlebody. The new 3 ply silicone construction is very durable with a smooth design that helps eliminate any turbulence caused by the factory corrugated tube. This enchanced silicone charge tube provides much needed airflow efficiency. Designed as a simple add-on upgrade that all Polaris RZR Turbo owners will be glad they did. Agency Power includes an extra vacuum port on the charge tube for those looking to add an aftermarket boost gauge or need to the vacuum source. Each silicone charge tube includes all clamps and hardware needed for installation. A CNC machined aluminum MAP sensor port and blow off valve port are included to work with factory components. Hoses are available in black, red, blue and feature the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
- Additional Vacuum Port
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Note:
The Agency Power Air Intake System for the Polaris RZR XP 1000 is a great upgrade to help improve air flow from the intake to the engine. Changing to the Agency Power durable silicone couplers, powder coated aluminum tube and upgraded high flow reusable air filter, can be a great benefit over stock. The tube with couplers and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. The easy modification of the Agency Power Air Intake System will help your Polaris RZR XP 1000 breathe better for greater performance.
The Agency Power cold air intake has been engineered to be a direct replacement for the factory Polaris RZR XP 1000 intake. Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The new Agency Power aluminum tube with silicone couplers replaces the factory restrictive plastic intake tube. The silicone coupler and aluminum tube has been designed not only to enhance the performance of your RZR XP 1000 but also an easy installation between the engine and stock air box. Each powder coated black aluminum tube has a smooth inside that helps eliminate any turbulence caused by corrugated tube designing from factory. The intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. The unique filter allows the velocity stack on top of the filter to take full advantage of the RZR air side vent.
Features:
- Aluminum Intake Tube
- Black Powder Coat Finish
- Silicone Coupler With Clamps
- Large 10in High Flow, Re-Usable Air Filter
- Stealth Black Look
- Bolt On
- Easy Installation
Fitment:
- 2014-2019 Polaris RZR XP 1000
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears in our Options
- Understanding cleaning and filter technology – Read Here
