Side by Side Outlet Parts and Accessories
The new Agency Power billet aluminum wastegate is the perfect upgrade for your Can-Am X3 turbocharger. The new wastegate features a 1bar spring housed in an 85mm body. This design allows you to easily change springs and service the wastegate if needed. As a direct bolt-on to your factory turbo, the wastegate features an adjustable rod for those that would like to set your crack pressure specifically to your build. Perfect for those looking to get better boost response out of the stock tune, an ECU flashed car, or even a turbo upgrade.
Doing a back to back dyno test, we show how the wastegate improves boost response and performance over the stock wastegate. Set at 1 full turn in from neutral, the new Agency Power billet wastegate holds 1 psi more than stock gaining you 4hp.
Features:
- Billet Aluminum Design
- Direct Bolt On
- Adjustable Rod
- Stiffer Spring
Notes:
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 | 4 Door
From the factory the Textron Wildcat XX is a very capable off-road vehicle. As with most vehicles from the factory, there is always more performance that can be had by swapping out a restrictive stock exhaust. The new Agency Power exhaust and header system is designed and engineered as a complete unit to let the high performance three-cylinder engine breathe freely. The bellow flex tube header adds flow and power while the race-ready muffler gives a unique sound. The unique titanium burnt and polished exhaust tip adds style over all other standard Wildcat XX exhausts. This package is a perfect addition for any owner looking for style, high performance and sound.
The Agency Power Header for the Wildcat XX is made from T304 stainless steel mandrel bent tubes that have been precision TIG welded. The header has a flange made to bolt to the factory heads, a bung to re-install the factory O2 sensor along with a new V-band clamp to connect to the Agency Power exhaust muffler. The pipe diameters off the heads are quickly increased to 1 7/8” and then unite at a larger more robust collector. The use of a bellow flex tube after the collector allows for better flow and flexibility during acceleration and keeps the system from developing cracks over exceptionally rough terrain.
Designed to work exclusively with the AP header, the Agency Power muffler uses the factory exhaust mount locations to install for a direct bolt-on fit. The performance resonator muffler outlet has been designed with integrated spark arrestors into the exhaust tip. The polished and titanium exhaust tip gives a show finish to the rear end of the Wildcat XX. The machine now has an aggressive look with a satisfying sound.
The Agency Power header and exhaust also saves weight. The factory system tops out at 27lbs while the AP header and exhaust combo only weighs 21lbs. With this six pound savings, the sprung weight of the vehicle is reduced, making the job of the suspension easier.
In order to be sure of horsepower gain, the Textron Wildcat XX was run back to back on the dyno to keep all the variables the same except for the header and exhaust. On a UTV with a stock tune, the header and exhaust made a bolt-on gain of five horsepower. While this isn’t breaking any records, netting an additional five horsepower is tough to do on any modern UTV with a simple bolt-on exhaust and no modifications or tune. Overall, the header and exhaust is a great product to add as your first upgrade or during your build to improve power. The Agency Power Textron Wildcat XX Header and Exhaust Systems have been engineered to perfection!
***Exhausts are made here in our Arizona facility. Depending on demand we may have exhausts instock or it may take several weeks to fulfill orders. Please contact us if you have any time constraints.***
Features:
- Stainless Steel Constructions
- Precision TIG Welding
- Clean and Satisfying Sound
- Direct Bolt-On
- Weighs 21 lbs (6 lbs Less Than Factory)
- Spark Arrestor Integrated Into Tip
- Blued Titanium Tip
- Header, Muffler and Tip Included
- Bung For O2 Sensor
- Header Runners 1 7/8”
- Bellow Flex Tube
- Gain of 5 hp
- Dyno proven results
Notes:
- When Running a Spark Arrestor Screen Be Sure to Check On Them From Time to Time That They Are Free Flowing and Not Clogged Of Debris.
- Spark Arrestor Screens Will Need to Be Serviced Which Varies on Driving Conditions.
- View Installation Instructions Here
Fitment:
- 2018+ Textron Wildcat XX
The Agency Power front bumper for the Honda Talon is designed to provide vehicle protection you want while keeping a great look to your UTV. The bumper consists of 1.5"x .095" wall steel tubing that has been digitally designed to flow with the Honda Talon rear shape. Each bumper features laser cut flanges and precision welds to ensure a perfect fit while maintaining quality. The bumper extends out and up providing necessary bracing to help protect you and your machine. All bumpers are Made in the USA designedspecifically for the Honda Talon 1000R or 1000X. Agency Power offers these bumpers in a Gloss Red or Gloss Black powdercoat to mesh with the stock Honda colorway. Whether you are racing, cruising the dunes, or trail riding, the Agency Power rear bumper is a great add-on for function and style.
Features:
- Increased Chassis Protection
- 1.5" X .095" Thick Tubing
- Follows Factory Styling
- Mild Steel for Durability and Sheer Strength
- Direct-Fit Bolt-On Installation
- Powder Coated for Durability
- Laser-Cut Agency Power Logo
- Weight 21.45 lbs
Fitment:
- Honda Talon 1000R 2019+
- Honda Talon 1000X 2019+
- Honda Talon 1000X-4 2019+
Notes:
The Agency Power front bumper for the Honda Talon is designed to provide vehicle protection you want while keeping a great look to your UTV. The bumper consists of 1.5"x .095" wall steel tubing that has been digitally designed to flow with the Honda Talon rear shape. Each bumper features laser cut flanges and precision welds to ensure a perfect fit while maintaining quality. The bumper extends out and up providing necessary bracing to help protect you and your machine. All bumpers are Made in the USA designedspecifically for the Honda Talon 1000R or 1000X. Agency Power offers these bumpers in a Gloss Red or Gloss Black powdercoat to mesh with the stock Honda colorway. Whether you are racing, cruising the dunes, or trail riding, the Agency Power rear bumper is a great add-on for function and style.
Features:
- Increased Chassis Protection
- 1.5" X .095" Thick Tubing
- Follows Factory Styling
- Mild Steel for Durability and Sheer Strength
- Direct-Fit Bolt-On Installation
- Powder Coated for Durability
- Laser-Cut Agency Power Logo
- Weight 21.45 lbs
Fitment:
- Honda Talon 1000R 2019+
- Honda Talon 1000X 2019+
- Honda Talon 1000X-4 2019+
Notes:
The Agency Power rear bumper for the Honda Talon is designed to provide vehicle protection you want while keeping a great look to your UTV. The bumper consists of 1.5”x .095” wall steel tubing that has been digitally designed to flow with the Honda Talon rear shape. Each bumper features laser cut flanges and precision welds to ensure a perfect fit while maintaining quality. The bumper extends out and up providing necessary bracing to help protect you and your machine. All bumpers are Made in the USA designed specifically for the Honda Talon 1000R or 1000X. Agency Power offers these bumpers in a Gloss Red or Matte Black powdercoat to mesh with the stock Honda colorway. Whether you are racing, cruising the dunes, or trail riding, the Agency Power rear bumper is a great add-on for function and style.
Features:
- 1.5” X .095” thick tubing
- Follows factory styling
- Adds chassis protection
- Mild Steel for durability and sheer strength
- Powder coated for durability
- Laser-cut Agency Power logo
- Does not work with Agency Power hitch
Agency Power has developed one of the most versatile passenger grab bars ever made for the Honda Talon. It is designed with comfort and utility in mind. When removed, the grab bar can be used as a lug wrench to take your wheels off on the fly. Since some aftermarket wheels require different lug nuts or use a lug adapter, we have integrated a 17mm and 19mm socket on each side of the handles. Being 20 inches long to adjust in or out for your passenger, the T-handle also provides massive leverage so breaking loose lugs is effortless. With the thru-hole into the bar, you will be able to attach accessories like phone holders, action camera mount, thread on cup holders, and many other options. The functionality of this grab bar doesn't stop there though. On the bottom side is a bottle opener that eliminates the need for a separate keychain. Agency Power has opted to use ODI flanged grips for maximum comfort. This bar is available in gloss red or matte black powder coat finishes. With the laser cut AP badge stamped on the front, there is no doubt people will wonder where you got it from.
Features:
- Can be used as a lug wrench
- Thru-hole to use accessories
- Bottle Opener on the bottom
- ODI Flanged grips for comfort
- Powder Coated Gloss Red
Note:
- Accessories pictured not included.
Agency Power has developed one of the most versatile passenger grab bars ever made for the Honda Talon. It is designed with comfort and utility in mind. When removed, the grab bar can be used as a lug wrench to take your wheels off on the fly. Since some aftermarket wheels require different lug nuts or use a lug adapter, we have integrated a 17mm and 19mm socket on each side of the handles. Being 20 inches long to adjust in or out for your passenger, the T-handle also provides massive leverage so breaking loose lugs is effortless. With the thru-hole into the bar, you will be able to attach accessories like phone holders, action camera mount, thread on cup holders, and many other options. The functionality of this grab bar doesn't stop there though. On the bottom side is a bottle opener that eliminates the need for a separate keychain. Agency Power has opted to use ODI flanged grips for maximum comfort. This bar is available in gloss red or matte black powder coat finishes. With the laser cut AP badge stamped on the front, there is no doubt people will wonder where you got it from.
Features:
- Can be used as a lug wrench
- Thru-hole to use accessories
- Bottle Opener on the bottom
- ODI Flanged grips for comfort
- Powder Coated Matte Black
Note:
- Accessories pictured not included.
The Polaris RZR XP Turbo is one of the most popular SXS vehicles to modify in the UTV market. After you have done all the basic bolt-on modifications such as exhaust, intake, ECU flash, and clutching, the next biggest gain in horsepower is from doing a full turbo upgrade. The factory turbocharger performs well in the 925cc, 2 cylinder engine, however there is much more to gain. An upgraded turbocharger will flow more air, requiring less boost pressure to gain power. But when you do increase that boost, be ready for an amazing push of performance! For those that want the ultimate edge on their friends and competitors, a turbo upgrade is the only answer.
Agency Power has partnered with one of the leading turbo manufactures to offer this full bolt-on turbo upgrade for the Polaris RZR XP Turbo. What makes the Agency Power Turbo better than the competition is that this is a complete OEM replacement. This is not a compressor cover, wheel modification, core exchange, or anything else that some others have available. This is a full replacement turbo that is a direct fit to your factory parts. The factory oil lines, intake and inlet pipes, and exhaust parts all bolt up to this turbo so there is no need to get extra parts or replace many of the current modifications you might already have. Completely made in North America, the turbo features a full cast manifold, new adjustable wastegate, larger compressor and turbine wheel, along with an enhanced turbo housing finished in gloss red with the Agency Power logo.
Whether you are going to be trail riding, ripping the dunes, or even competing in the desert, the Agency Power upgraded turbocharger for the Polaris RZR XP Turbo is for you. This turbo can be used as a bolt-on replacement for the factory turbo or you can partner with your preferred tuner to unleash its full potential!
Specifications:
- OEM Turbo flows up to 0.16kg/s
- AP Turbo flows up to 0.21kg/s
- Airflow is increased by 31% over stock
- Compressor Wheel
- Inducer- 41mm
- Exducer- 51mm
- Turbine Wheel
- Inducer- 45mm
- Exducer- 40.4mm
Features:
- Bolt-on no modifications required to fit
- Powdercoated red compressor cover with AP logo
- Made in North America
- No Core required, keep or sell your OEM turbo
- More consistent torque curve
- Less dip in top end power band
- Stays in torque longer
- 40+ HP gain on pump gas with tuning and supporting mods
- 50+ HP gain on race gas with tuning and supporting mods
Notes:
- This is for the bolt-on turbocharger only. This does not include tuning or other supporting modifications.
- Recommended Parts for Installation:
- Exhaust System
- Blow Off Valve
- Silicone Intake and Turbo Inlet Pipes
- For maximum performance, bigger injectors should be used. This depends on your tuner
- Turbo Heat Blanket for K04 Size Turbo – Excessive Heat Can Occur
- Clutching
- AEM Wideband Failsafe Gauge to monitor boost and AFR – Not required, great add-on to monitor vitals.
- ECU Tuning – Absolutely required!
Fitment:
- 2016-2020 Polaris XP Turbo | XP4 Turbo
- 2019-2020 Polaris XP Turbo S | XP4 Turbo S
- OEM Replacement for Polaris Part Number 1205689
The Polaris RZR XP Turbo can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the RZR XP Turbo even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Polaris RZR XP Turbo or other uses.
The Agency Power Polaris RZR XP Turbo Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and Has a 5/8 Through Hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Gloss Red
- Made in the USA
Fitment:
- Polaris RZR XP Turbo 2016+
- Polaris RZR XP 4 Turbo 2016+
The Polaris RZR XP Turbo can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the RZR XP Turbo even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Polaris RZR XP Turbo or other uses.
The Agency Power Polaris RZR XP Turbo Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and Has a 5/8 Through Hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Satin Black
- Made in the USA
Fitment:
- Polaris RZR XP Turbo 2016+
- Polaris RZR XP 4 Turbo 2016+
Any UTV owners know that their machine could always use a little better handling, stability, and fewer chances of rolling over. Body roll is the bane of every UTV due to the soft suspension and narrow track width. Track width plays a huge role in the suspension dynamics and can make a vehicle more likely to roll over if pushing the limits accelerating through a corner too fast.
Agency Power helps solve this issue with wheel spacers for your UTV! Installing a set of wheel spacers will increase the track width of your machine and provide exceptional handling improvements. When you increase the overall width of your machine, you are decreasing the chances of rolling over while also improving agility, stability, and grip. Aside from the change in suspension dynamic, the Agency Power wheel spacers will also allow you to achieve a specific stance or wheel offset if needed.
The aluminum construction saves a significant amount of weight compared to steel spacers without sacrificing durability. Steel lug studs are pressed into the spacer to provide reliable lug nut engagement without the chances of the lug nut seizing on the stud. CNC machining allows the Agency Power spacers to fit precisely against the hub of your machine to prevent any wheel balancing issues.
Feautures:
- Spacers are 2-inches wide each
- 4x156 - M12x1.5 - 131mm hub bore
- Improves overall handling of your machine
- Increases the track width
- Provides more aggressive offset and stance
- Durable and light-weight aluminum construction
- Steel lug studs prevent seizing of lug nuts
- CNC machined for precision fitment
- Limited One-Year Warranty
Fitment:
- Polaris RZR 1000 (all)
- Polaris RZR 900 / S / XC 2015+
- Polaris RZR XP Turbo
- Polaris Ranger 900 (all)
- Polaris Ranger 1000 (all)
- Polaris General 1000 (all)
- Kawasaki Mule Pro (all)
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
When it comes to making more power, heat becomes an issue that can hold you back. Turning up boost pressure or upgrading to a bigger turbo will result in additional heat. This is due to the turbocharger generating more energy which is a direct translation to higher heat levels. To combat this issue, Agency Power has released a turbo/manifold blanket for your Agency Power upgraded turbo on your Polaris RZR XP Turbo!
Containing the heat produced by your turbocharger can pose many benefits. Your turbocharger will increase efficiency by isolating the heat to the hot side. This will keep heat away from the compressor side which results in cooler intake air temperatures (IAT). Reducing the IAT will correspond to extra horsepower. Additionally, having the heat dispersed through the turbo blanket will reduce the overall engine bay temperature up to 60-percent.
The blanket consists of pulverized volcanic lava rock woven into a tight weave that can withstand a whopping 1800°F of direct heat and 2500°F of radiant heat. The inner insulation layer is constructed from extreme conditions calcium magnesium silicate wool. To tie everything together, a fine weave steel mesh conjoins all the materials to provide ultimate heat containment.
Features:
- Fit's Agency Power big turbo upgrade
- Reduces the overall engine bay temperature by 60-percent
- Can withstand 1800°F of direct heat and 2500°F of radiant heat
- The outer layer is constructed from pulverized volcanic lava rock
- Inner layer features calcium magnesium silicate wool
- Isolates heat from the compressor side
- Lowers the intake air temperature significantly
- Hand-crafted in the USA!
- One-year warranty
Fitment:
- Polaris RZR XP Turbo 2016-2020
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
