Side by Side Outlet Parts and Accessories

PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System

Snow doesn't stand a chance against DENALI Pro UTV Snow Plows. Designed in the USA, these heavy duty, County-style 12-gauge steel UTV plow blades make quick work of powder and wet snow. The center mounted design disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. The plow kit includes a reversible wear bar, rubber flap, and skid feet to protect the blade from wear and tear. Dual-layer powder & Polyester paint coat boosts corrosion protection and UV resistance, keeping you plowing for seasons to come.

Please Note:All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, VIPER Max, or VIPER Midnight winch with an automatic brake.

Kit Contents:

• UTV Snow Plow Blade - County / DOT Style
• UTV Pushtubes
• One (1) Reversible Wearbar
• Rubber Flap
• Rubber Flap Stabilizer Bar
• Skid Feet
• Plow Markers
• Plow Mount (add year, make, & model in notes section at checkout)
• Installation Hardware and Instructions

Blade Features:

• County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
• Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
• Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
• High strength, high yield 3/16 thick Grade 50 steel wear bar
• Angled Blade : 16 on the low side; 23 on the high side
• Rubber flap & stabilizer bar with rubber flap
• Height AND angle adjustable steel skid feet
• 3 Year Warranty
• Made in the USA

Pushtube Features:

• PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
• Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
• Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
• Simple detachment system with the pull of a pin
• Structural tube steel cross bar for added lateral rigidity
• Quick release pins included
• 13.5 inches center to center for plow mount tabs
• Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
• Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)
• Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

Optional Hydroturn Features:

• PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
• Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
• Change the blade angle while driving; full radius turn in just 10 seconds
• Heavy duty chrome plated ¾″ cylinder shaft
• No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
• Wire harness utilizes weatherproof connectors

Optional Plow Pulley Fairlead Features:

• • Roller
    •      Replaces the winch fairlead during the plow season
    •      For use with Steel AND Synthetic cables
    •      Curved cable groove helps eliminate flattening and breaking of cable
    •      Bolt Patterns:
    •         Standard Spool: 3″ x 4.875″
    •         Wide Spool: 3" x 6.67″

• • Sheave
    •      Includes pulley, 1/4″ clevis hook and nylon strap
    •      Allows greater precision when raising/lowering plow blade and increases the angle of pull

• Cable
  •      12′ length, 1/4″ diameter
  •      Single braid, dyneema rope with galvanized steel thimble/eyelet

Details

Flap Kit Contents:

• Rubber Flap
• Metal Hold down Bar
• Installation Hardware

OEM Injector Cap Replacements for CFMoto UTVs.

Replaces OE 707800371 

• Clamp on mounting for positive seal - Ends leaking/dust ingress around the seal.
• 47% Increase in dust holding over the OEM filter - Maximum power and extended service intervals
• 99.992 efficiency - Unmatched on ISO fine dust - Keeps the finest dust and silt out of your engine!
• Washable and Reusable - Super-tough, synthetic hybrid fiber structure specifically designed for a simple maintenance routine using compressed air or vacuum.  Wash when needed. Last's for years, saving you money after a two uses!
• No Oiling - Just clean it, let it dry and roll out!
• Great for Off-Road, Sand, Trail Riding or Anywhere you ride your Can Am!

Oil Catch Can Reservoir Tank Kit

with 3/8" NBR Fuel Line

Aluminum

Black

300ml

Easy install with Screws (provided). Built with reinforced plastic back wall, water-repellent material and heavy-duty hardware. Attaches front to back of the manufacturers plastic roof using the existing roof nipples (drilling required) and the pre-set holes on the console. It is made with 4 separate compartments.

Made in the USA.

Fits the Honda Pioneer 1000 only.

A heat reflective under seat cover made of water-repellent outer fabric, padded and lined with Next Gen Heat Reflive material that deflects 95% of heat that comes from under the seats. Attaches easily under both seat with 5 cutouts for seatbelt strappings.

Made in USA.

Don’t let the elements slow you down. A clogged filter chokes your engine of power. The S&B Particle Separator lets you play in harsh conditions, as it was designed to protect from water, snow, sand and fine dust. The Particle Separator ejects 94% of the dusty air before it reaches your stock filter.

• Separates over 94% of dust before it reaches the air filter
• Integrates into Pro XP body for factory fit and finish
• Scavenge fan only runs when needed
• Connects to your pulse bus bar power
• Protects your engine. Overloaded filters can collapse resulting in a dusted motor.
• Replaces the stock intake tube with high temp crosslink polyethylene so it will hold shape in even the hottest conditions.

• Soft-Medium Terrain.
• Radial, 8 Ply rated construction.
• Excellent off-road performance driven design.
• Superior performance in loose terrain or hardpack surfaces.
• Increased traction for high horsepower models.
• Ultimate straight line stability under acceleration in loose terrain.
• Aggressive tread styling.
• Self-cleaning large open tread design.
• 3/4" tread depth.

Replacement Duct Hose ONLY.