Side by Side Outlet Parts and Accessories
Replaces OE 707800371
- Clamp on mounting for positive seal - Ends leaking/dust ingress around the seal.
- 47% Increase in dust holding over the OEM filter - Maximum power and extended service intervals
- 99.992 efficiency - Unmatched on ISO fine dust - Keeps the finest dust and silt out of your engine!
- Washable and Reusable - Super-tough, synthetic hybrid fiber structure specifically designed for a simple maintenance routine using compressed air or vacuum. Wash when needed. Last's for years, saving you money after a two uses!
- No Oiling - Just clean it, let it dry and roll out!
- Great for Off-Road, Sand, Trail Riding or Anywhere you ride your Can Am!
Easy install with Screws (provided). Built with reinforced plastic back wall, water-repellent material and heavy-duty hardware. Attaches front to back of the manufacturers plastic roof using the existing roof nipples (drilling required) and the pre-set holes on the console. It is made with 4 separate compartments.
Made in the USA.
Fits the Honda Pioneer 1000 only.
A heat reflective under seat cover made of water-repellent outer fabric, padded and lined with Next Gen Heat Reflive material that deflects 95% of heat that comes from under the seats. Attaches easily under both seat with 5 cutouts for seatbelt strappings.
Made in USA.
Don’t let the elements slow you down. A clogged filter chokes your engine of power. The S&B Particle Separator lets you play in harsh conditions, as it was designed to protect from water, snow, sand and fine dust. The Particle Separator ejects 94% of the dusty air before it reaches your stock filter.
- Separates over 94% of dust before it reaches the air filter
- Integrates into Pro XP body for factory fit and finish
- Scavenge fan only runs when needed
- Connects to your pulse bus bar power
- Protects your engine. Overloaded filters can collapse resulting in a dusted motor.
- Replaces the stock intake tube with high temp crosslink polyethylene so it will hold shape in even the hottest conditions.
Don’t let the elements slow you down. A clogged filter chokes your engine of power. The S&B Particle Separator lets you play in harsh conditions, as it was designed to protect from water, snow, sand and fine dust. The Particle Separator ejects 94% of the dusty air before it reaches your stock filter.- Separates over 94% of dust before it reaches the air filter
- Mounts to the upper or lower roll bars
- Scavenge fan only runs when needed
- Connects to your pulse bus bar power
- Protects your engine. Overloaded filters can collapse resulting in a dusted motor.
- Soft-Medium Terrain.
- Radial, 8 Ply rated construction.
- Excellent off-road performance driven design.
- Superior performance in loose terrain or hardpack surfaces.
- Increased traction for high horsepower models.
- Ultimate straight line stability under acceleration in loose terrain.
- Aggressive tread styling.
- Self-cleaning large open tread design.
- 3/4" tread depth.
- Polaris RZR XP 1000 : 2014+
- Polaris RZR XP 4 1000 : 2014+
- Polaris RZR XP 1000 High Lifter : 2015+
- Polaris RZR XP 4 1000 High Lifter : 2016+
- Polaris RZR XP 1000 Trails and Rocks : 2017+
- Polaris RZR XP 1000 Fox Edition : 2015
- Polaris RZR XP Turbo and S : 2016+
- Polaris RZR XP 4 Turbo and S : 2016+
- Polaris RZR 900 : 2015-2020
- Polaris RZR S 900 : 2015-2020
- Polaris RZR 900 XC : 2015-2017
- Polaris RZR 4 900 : 2015-2018
- Polaris RZR S4 900 : 2018
- Polaris RZR S 1000 : 2016-2020
- Polaris RZR S4 1000 : 2019-2020
The SuperATV Difference - Heims and Helical Inserts We pulled out all the stops with these radius arms by installing helical inserts in our threads. They work by reinforcing threads with high quality steel. With helical inserts, your heim joints will never strip their threads making these the most securely attached heim joints in the industry.
Our heim joints are beefed up too. We utilize heavy-duty 5/8" x 18 steel joints with precision-made 5/8" steel bushings to ensure smooth operation and long-lasting reliability. We use left-hand and right-hand threads on our heim joints so that you can adjust your camber and toe on the fly, and the hex design is convenient for gripping with a wrench so you can make those adjustments easily. Now you can quit worrying about your suspension and focus on the trail ahead.
Replaced #101630.
Note:
- Will NOT work with the 2017 with 10mm A-Arm Bolts (too loose fitting). Must have 12mm Bolts.
- If your RZR has the 10mm Bolts you will need Part Number 101200.
- Works with Polaris OEM Rear Bumber
Specifications:
- 100% MADE IN USA.
- Constructed of 1/4" and 3/16" steel
- Unlike all other competitors, our products are metal bead blasted before they are powder coated for the best possible finish prep.
- Powder coated black for supreme durability
- Complete installation instructions included
- Removable hitch for maintenance
- Satisfaction guaranteed
Features:
- Built from .095” wall, heavy-duty steel tubing.
- Easily mounts to the frame.
- Provides extra strength and protection.
- Works with stock and HMF™ exhausts.
