Note: As of 2019 All Radiator Relocation Kits will Include the Fan Override Switch Kit

Made to order: Estimated 1 week build time

The E-Series is one of RIGIDs most versatile, all-around lighting […]

Introducing The Weld It Yourself FLAT Cage Kit For The Can-am X3 MAX! This Cage Is Built With .120 Wall DOM Main Tubes And .095" DOM Support Tubing That Can Be Either MIG Or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle.

Introducing The Weld It Yourself Cage Kit For The RZR PRO XP 4 Seater! This Cage Is Built With .120 Wall DOM Main Tubes And .095" DOM Support Tubing That Can Be Either MIG or TIG Welded Without The Use Of A Specialized Fixture - Just Install The Supplied Connector Plates To The Stock Cage Locations And Piece Together The Cage On The Vehicle.

Billet Front Knuckle / Wheel Bearing Carrier 

The Polaris RZR XP Turbo is one of the most popular SXS vehicles to modify in the UTV market.  After you have done all the basic bolt-on modifications such as exhaust, intake, ECU flash, and clutching, the next biggest gain in horsepower is from doing a full turbo upgrade.  The factory turbocharger performs well in the 925cc, 2 cylinder engine, however there is much more to gain.  An upgraded turbocharger will flow more air, requiring less boost pressure to gain power.  But when you do increase that boost, be ready for an amazing push of performance!  For those that want the ultimate edge on their friends and competitors, a turbo upgrade is the only answer.

Agency Power has partnered with one of the leading turbo manufactures to offer this full bolt-on turbo upgrade for the Polaris RZR XP Turbo.  What makes the Agency Power Turbo better than the competition is that this is a complete OEM replacement.  This is not a compressor cover, wheel modification, core exchange, or anything else that some others have available.  This is a full replacement turbo that is a direct fit to your factory parts.  The factory oil lines, intake and inlet pipes, and exhaust parts all bolt up to this turbo so there is no need to get extra parts or replace many of the current modifications you might already have.  Completely made in North America, the turbo features a full cast manifold, new adjustable wastegate, larger compressor and turbine wheel, along with an enhanced turbo housing finished in gloss red with the Agency Power logo.

Whether you are going to be trail riding, ripping the dunes, or even competing in the desert, the Agency Power upgraded turbocharger for the Polaris RZR XP Turbo is for you.  This turbo can be used as a bolt-on replacement for the factory turbo or you can partner with your preferred tuner to unleash its full potential!

Specifications:

• OEM Turbo flows up to 0.16kg/s
• AP Turbo flows up to 0.21kg/s
• Airflow is increased by 31% over stock
• Compressor Wheel
  • Inducer- 41mm
  • Exducer- 51mm
• Turbine Wheel
  • Inducer- 45mm
  • Exducer- 40.4mm

Features:

• Bolt-on no modifications required to fit
• Powdercoated red compressor cover with AP logo
• Made in North America
• No Core required, keep or sell your OEM turbo
• More consistent torque curve
• Less dip in top end power band
• Stays in torque longer
• 40+ HP gain on pump gas with tuning and supporting mods
• 50+ HP gain on race gas with tuning and supporting mods

Notes:

• This is for the bolt-on turbocharger only.  This does not include tuning or other supporting modifications.
• Recommended Parts for Installation:
  • Exhaust System
  • Blow Off Valve
  • Silicone Intake and Turbo Inlet Pipes
  • For maximum performance, bigger injectors should be used.  This depends on your tuner
  • Turbo Heat Blanket for K04 Size Turbo – Excessive Heat Can Occur
  • Clutching
  • AEM Wideband Failsafe Gauge to monitor boost and AFR – Not required, great add-on to monitor vitals.
  • ECU Tuning – Absolutely required! 

Fitment:

• 2016-2020 Polaris XP Turbo | XP4 Turbo
• 2019-2020 Polaris XP Turbo S | XP4 Turbo S
• OEM Replacement for Polaris Part Number 1205689

Headers designed for the maximum power output Single Lambda sensor comes standard Constructed from Aerospace grade hi heat Titanium alloys Advanced welding process showcases laser perfection welds Long Tapers with Precision fitment and "butt" welds Spigots designed to allow the headers to float free without leaks Flanges are made from 7075 hard anodized aluminum. Built to last!

Exhaust System Saves 14.7 lbs. over stock setup. 83 db at Idle / 96.5 db at 4000 rpm Fitment: Yamaha YXZ 1000r (All) 2016 - 2019

The MAVERICKBOAKIT3 is a package that includes everything you need to take your Can-Am Maverick to the next level in sound. This kit includes the MUDSYS41 Bluetooth overhead audio system, MUD100.2 compact amplifier, a pair of all weather MUD65PL roll cage mount speakers, CANAM-10 amplified subwoofer enclosure, and all the wires you need to connect everything together.

When you operate your UTV over 40 MPH you are […]

Introducing the weld it yourself RADIUS cage kit for your 2014+ Polaris XP1000 4 Seater! This cage is built with .120" &  .095" DOM tubing that can be either MIG or TIG welded without the use of a specialized fixture - just install the supplied connectors to the stock cage locations and piece together the cage on the vehicle.

• • Made in USA
  • Made From 1.5” Diameter Steel Tubing
  • Powder Coated Finish
  • Tailgate can be Pad-Locked
  • (3) “It Fits” ™ mounting locations for RBO accessories.
  • Multiple Tiedown Points in the Top Rack so you can secure Cargo from every direction
  • Mounts without Modifying your UTV using basic hand tools
  • All Mounting Hardware included
  • Maximum Combined Capacity of Cargo Rack 160 lbs. (Limited by Vehicle Capacity)
  • Load Capacity of Top Rack is 60 lbs. (Limited by Vehicle Capacity)
  • Load Capacity of Side Rack is 30 lbs. per side (Do Not Mount Spare Tires on Side Racks)
  • For Racks with a Tailgate the Load Capacity of the tailgate is 40 lbs. (Limited by Vehicle Capacity)