Side by Side Outlet Parts and Accessories
Every Demon Powersports Heavy Duty Axle Assembly Features:
- Cage Made Up of 4340 Chromoly Material
- Thermoplastic Polyester Elastomer (TPEE) Boots
- 15 percent - 20 percent Increase in Diameter Compared to OEM Axles
- 10 percent - 15 percent Increase in CV Joint Size Compared to Regular Joints
- Wider Articulation Angles
- Boots Packed with High Load Molybdenum Grease
- Precision CNC Machined
- Direct OEM Replacement
- Backed by a 12 - Month Manufacturer Limited Warranty
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Matte Black
- Mesh: Matte Black
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
It's no secret the RZR engine is known to get hot. Keep the RZR XP 1000 or XP Turbo engine bay cool with the Agency Power Vented Engine Cover. At full throttle, the engine temperature can exceed 200°F. With the location of the exhaust manifold and turbo pipe, there is an abundance of hot air that is not helping the overall performance of the Polaris engine. The purpose of the vented engine cover is to help alleviate heat soak to the high revving 2 cylinder engine. This engine cover allows for heat to escape through its ventilated design. When driving at speed, air flow moving over the body gets sucked into the engine area which is than extracted out of the vented engine cover.
The 1 piece aluminum part has cut with a precision water jet, featuring the AP logo. Each cover is formed to provide a perfect fit replacing the stock plastic engine cover. Hexagonal stainless steel mesh is then riveted in place for a rugged look. To keep the part functional and allow easy access to your engine for servicing, a quick release push button is built into the cover. This keeps the cover secure in place for normal use while not inconveniencing you with any fixed bolting or hardware to the body. The sturdy design allows you to retain functional use of your RZR bed. Available in a variety of colors to match your unique style, the Agency Power vented engine cover is a great addition to your Polaris RZR XP 1000 or XP Turbo. Each cover is assembled here in Arizona, USA.
Features:
- Frame: Gloss Black
- Mesh: Gloss Black
- Lowers Engine Bay Temperatures and Reduces Heat Soak
- Quick Release Fastener for Secure Mounting and Easy Removal
- Corrosion Resistant Sturdy Aluminum Construction
- Easy Direct-Fit Installation
- Rugged Off-Road Styling
- Long Lasting Powder Coated Finish
Notes:
- Overweight items may cause damage to structure or mesh
- View Installation Instructions Here
Fitment:
- Polaris RZR XP 1000 2014-2018
- Polaris RZR XP4 1000 2014-2018
- Polaris RZR XP Turbo 2016-2018
- Polaris RZR XP4 Turbo 2016-2018
If you have the Agency Power big brake kit for the Can-Am Maverick X3, this is a replacement rotor for the front or rear left side. The rotor reuses the aluminum hat and hardware. The nuts on the 2 piece hardware can be reused up to 3 times. Should you need the aluminum hat or hardware, please contact us.
- Left Side
- Front or Rear
- 12x.810"
- Vented, directional, slotted, drilled, zinc coated
- For big brake kit only
- Sold individually
This new cap is very robust in its construction to significantly reduce the binding caused by the stock cap in RZR Turbo and RS1 models. This decreases heat and friction, improves clutching consistency and performance and lengthens clutch and belt life. One key to our design is the tight tolerance bronze bushing that we use. This bushing is flanged to insure that it stays in place and the tighter tolerance between the bushing and the spider nut helps further reduce heat and friction caused by cap bushing bind to eliminate the problem rather than just deal with the headaches the extra heat and friction create. This kit comes complete with a new spider nut that has been machined in the castle area to allow its use with the tight tolerance bushing.
Adding RIGID LED lighting to the Polaris RZR Turbo has […]
Force Turbos' Universal BOV is designed to fit into a silicone charge tube with a 1” port size.
Force Turbos worked with TurboSmart, one of the top turbo component companies in the world to bring you a no-hassle vehicle-specific vent to atmosphere BOV assembly.
This BOV is machined to tight tolerances and specifically designed to work with the air flows of your powersport vehicle.
Big side ports and an adjustable cap give you unlimited tuning options. Hard setting gives you a short piston stroke for fast throttle response and fast turbo shaft speeds or soft setting for longer piston throw and slower reaction. Either way you set it up you will be getting the ultimate in performance.
There are no piston working O-rings to wear out, warp, become brittle, or slow down the BOV’s function.
The BOV piston is hard coated for the longest life possible.
Assembly comes with a custom fitted sock for peace of mind that no dirt or debris can make it into the BOV outlet air ports.
AGM’s uni-ball tool’s compact size and easy operation allows you […]
Whether you use your UTV on the dirt, in the sand, through the snow, or over the mud, Black Rhino now offers a lineup of UTV wheels to suit your needs. Utilizing our expertise from the off road truck market, Black Rhino off road wheel engineering has been carried over into the UTV wheel design. For even the most hardcore sidebyside wheel needs in mind, Black Rhino has taken our popular wheel designs for a complete overhaul. Each sidexside wheel was individually engineered and tested for street and offroad use.
If your machine is leaking oil from the axles/output shaft, […]
Agency Power has developed one of the most versatile passenger grab bars ever made for the Honda Talon. It is designed with comfort and utility in mind. When removed, the grab bar can be used as a lug wrench to take your wheels off on the fly. Since some aftermarket wheels require different lug nuts or use a lug adapter, we have integrated a 17mm and 19mm socket on each side of the handles. Being 20 inches long to adjust in or out for your passenger, the T-handle also provides massive leverage so breaking loose lugs is effortless. With the thru-hole into the bar, you will be able to attach accessories like phone holders, action camera mount, thread on cup holders, and many other options. The functionality of this grab bar doesn't stop there though. On the bottom side is a bottle opener that eliminates the need for a separate keychain. Agency Power has opted to use ODI flanged grips for maximum comfort. This bar is available in gloss red or matte black powder coat finishes. With the laser cut AP badge stamped on the front, there is no doubt people will wonder where you got it from.
Features:
- Can be used as a lug wrench
- Thru-hole to use accessories
- Bottle Opener on the bottom
- ODI Flanged grips for comfort
- Powder Coated Gloss Red
Note:
- Accessories pictured not included.
