Side by Side Outlet Parts and Accessories

When it comes to making more power, heat becomes an issue that can hold you back. Turning up boost pressure or upgrading to a bigger turbo will result in additional heat. This is due to the turbocharger generating more energy which is a direct translation to higher heat levels. To combat this issue, Agency Power has released a turbo/manifold blanket for your Agency Power upgraded turbo on your Polaris RZR XP Turbo!

Containing the heat produced by your turbocharger can pose many benefits. Your turbocharger will increase efficiency by isolating the heat to the hot side. This will keep heat away from the compressor side which results in cooler intake air temperatures (IAT). Reducing the IAT will correspond to extra horsepower. Additionally, having the heat dispersed through the turbo blanket will reduce the overall engine bay temperature up to 60-percent.

The blanket consists of pulverized volcanic lava rock woven into a tight weave that can withstand a whopping 1800°F of direct heat and 2500°F of radiant heat. The inner insulation layer is constructed from extreme conditions calcium magnesium silicate wool. To tie everything together, a fine weave steel mesh conjoins all the materials to provide ultimate heat containment.

Features:

• Fit's Agency Power big turbo upgrade
• Reduces the overall engine bay temperature by 60-percent
• Can withstand 1800°F of direct heat and 2500°F of radiant heat
• The outer layer is constructed from pulverized volcanic lava rock
• Inner layer features calcium magnesium silicate wool
• Isolates heat from the compressor side
• Lowers the intake air temperature significantly
• Hand-crafted in the USA!
• One-year warranty

Fitment:

• Polaris RZR XP Turbo 2016-2020

Notes:

• Agency Power Offers a One-Year Warranty Against Defects or Failures
• Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
• Warranty is Available With Original Invoice Showing Purchase Date

The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.

Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.

The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation.  Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.

Features:

• 3 Ply Silicone Construction
• Stealth Black Look
• High Flow, Reusable Air Filter
• Simple Bolt On

Fitment:

• 2016-2019 Polaris RZR XP Turbo
• 2018-2019 Polaris RZR Turbo S

 Note:

• For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
• Understanding cleaning and filter technology – Read Here

The Agency Power Air Intake System for the Polaris RZR 900s | 1000s is a great upgrade to help improve air flow from the intake to the engine. Changing to Agency Power’s durable silicone couplers, powder coated aluminum tube, filter mount, and high flow reusable air filter, this upgrade can be a HUGE benefit. The new tube and filter are designed to replace the factory intake parts but reuse the factory air inlet scoop to provide air flow. The easy modification of the Agency Power Air Intake System will help your Polaris RZR 1000S and 900S breathe better for greater performance.

The Agency Power cold air intake has been engineered to be a direct replacement for the factory Polaris RZR 900S and 1000s intake. Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.

The new Agency Power aluminum tube with silicone couplers replaces the factory restrictive plastic intake tube. The silicone coupler and aluminum tube have been designed not only to enhance the performance of your RZR S but also be an easy installation between the engine and air filter mount. Each powder coated black aluminum tube has a smooth inside that helps eliminate any turbulence caused by corrugated or collapsed tube designs from factory. The intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. The unique filter mount allows the air filter to take the place of the factory air box but due to the velocity stack on the top of the filter, it still takes full advantage of the RZR air side vent.

Features:

• Aluminum Intake Tube
• Black Powder Coat Finish
• Silicone Coupler With Clamps
• Unique Filter Mount
• Large 12in High Flow, Re-Usable Air Filter
• Stealth Black Look
• Bolt On
• Easy Installation

Fitment:

• 2015-2019 Polaris RZR 900 S
• 2015-2019 Polaris RZR 1000 S

Note:

• View Installaton Instructions HERE
• For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – See Options
• Understanding cleaning and filter technology – Read Here

The Can-Am Maverick X3 can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the Can-Am X3 even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Can-Am X3 or other uses.

The Agency Power Can-Am X3 Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.

Features:

• View Install Instructions Here
• Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
• 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and has a 5/8 thru hole
• 0.188" Thick Rolled Steel (11 gauge) Plate
• Stylish Design with Agency Power Logo
• Powder Coated Gloss Red
• Made in the USA

Fitment:

• Can-Am Maverick X3 900 2018
• Can-Am Maverick X3 Turbo 2017+
• Can-Am Maverick X3 Turbo R 2017-2019
• Can-Am Maverick X3 X DS Turbo R 2017+
• Can-Am Maverick X3 X DS Turbo RR 2020+
• Can-Am Maverick X3 X RC Turbo 2018+
• Can-Am Maverick X3 X RC Turbo R 2018+
• Can-Am Maverick X3 X RC Turbo RR 2020+
• Can-Am Maverick X3 X RS Turbo R 2017+
• Can-Am Maverick X3 X RS Turbo RR 2020+
• Can-Am Maverick X3 X MR Turbo 2018+
• Can-Am Maverick X3 X MR Turbo R 2018-2019
• Can-Am Maverick X3 X MR Turbo RR 2020+
• Can-Am Maverick X3 MAX Turbo 2017+
• Can-Am Maverick X3 MAX Turbo R 2017+
• Can-Am Maverick X3 MAX X RS Turbo R 2017+
• Can-Am Maverick X3 MAX X RS Turbo RR 2020+
• Can-Am Maverick X3 MAX X MR Turbo R 2019+
• Can-Am Maverick X3 MAX X MR Turbo RR 2020+
• Can-Am Maverick X3 MAX X DS Turbo 2017-2019
• Can-Am Maverick X3 MAX X DS Turbo R 2020+
• Can-Am Maverick X3 MAX X DS Turbo RR 2020+

Fits: 2015+ RZR 900 Trail ONLY

Our lower door inserts are made from 1/4″ smoked Polycarbonate. They are CNC cut, and hand finished in Nampa, Idaho…USA!  The RZR 900 Trail doors come complete with 2 doors, 2 shoulder bolsters, and all stainless steel mounting hardware. They are easy to install, and are one of the best sealing door inserts on the market.

Best all around kit for most riding styles.  We personally choose this kit over others because of its economical price tag, yet noticeable results!  If you are installing yourself, required specialty tools needed are a Clutch Puller PCP-1 and Clutch Compression Tool CCT510

Best all around kit for most riding styles.  We personally choose this kit over others because of its economical price tag, yet noticeable results!  If you are installing yourself, required specialty tools needed are a Clutch Puller PCP-1 and Clutch Compression Tool CCT510

Best all around kit for most riding styles.  We personally choose this kit over others because of its economical price tag, yet noticeable results!  If you are installing yourself, required specialty tools needed are a Clutch Puller PCP-17 and Clutch Compression Tool CCT510

• Approximate height measured at the center is 8 3/4"
• Easy on/off quick connect flip clamps
• Fits All CF Moto U-Force Models 2015-Current

• Constructed from 1/8" Tinted General Purpose Polycarbonate
• Will NOT work with OEM roof!
• Includes One Adjustable/Waterproof COMFORT FLOW Vent
• Uses Spike TRR (Tool-less Rapid Release) Clamping System
• Includes cut-outs for adding 4-Point safety harness
• All Hardware included

Each Kit Features:

• Clip-in installation Bag dimensions are 24W x 16L x 8H
• Large storage capacity
• Designed specifically for the Cognito Cargo Carrier
• Water resistant
• Durable vinyl construction
• Heavy-duty zipper Made in the USA