Side by Side Outlet Parts and Accessories
Upgrading the intake and exhaust camshafts on your Can-Am X3 Turbo is a easy way to add 10hp and 30ft/lbs of torque as dyno tested. The pair of camshafts are a direct drop-in for the 3 cylinder turbo engine. There are no separate parts required or tuning to take advantage of these gains. The profile of these camshafts were spec'd to provide the best performance necessary with most commonly tuned X3 vehicles. We recommend our ECU flash to take advantage of the most power your X3 has to offer. Our demonstration vehicle was a 2017 X3 RS converted to 2018 power specs which featured our 195HP tune with an Agency Power exhaust and cold air intake. With a baseline of 148hp and 149ft/lbs of torque, we installed the camshafts and then re-ran the vehicle. Without any other variables, the vehicle than made 160 rear wheel horsepower and 181 ft/lbs of torque. With 110F temperatures and 91 octane fuel this car still represents a very impressive 210bhp on our Mustang Dyno. The Mustang Dyno typically shows a 25-30% drivetrain loss with the CVT transmission. These camshafts are sold as a pair for the intake and exhaust cam replacement.
Notes:
Recommended Parts to Achieve Same PEAK Dyno Results
- ECU Tuning
- Agency Power Valvetronic Dump Pipe
- Agency Power Cold Air Intake
- Agency Power Blow Off Valve Kit
- Agency Power Wastegate
- Agency Power Intercooler
Fitment:
- 2017 Can-Am Maverick X3 Turbo DS RS 154HP
- 2018 Can-Am Maverick X3 Turbo 120HP
- 2018 Can-Am Maverick X3 Turbo DS RS RC 172HP
- 2019 Can-Am Maverick X3 Turbo DS RS RC 172HP
- Fits both 2 Seater and 4 Seater Models
The Can-Am Maverick X3 can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the Can-Am X3 even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Can-Am X3 or other uses.
The Agency Power Can-Am X3 Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- View Install Instructions Here
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and has a 5/8 thru hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Gloss Red
- Made in the USA
Fitment:
- Can-Am Maverick X3 900 2018
- Can-Am Maverick X3 Turbo 2017+
- Can-Am Maverick X3 Turbo R 2017-2019
- Can-Am Maverick X3 X DS Turbo R 2017+
- Can-Am Maverick X3 X DS Turbo RR 2020+
- Can-Am Maverick X3 X RC Turbo 2018+
- Can-Am Maverick X3 X RC Turbo R 2018+
- Can-Am Maverick X3 X RC Turbo RR 2020+
- Can-Am Maverick X3 X RS Turbo R 2017+
- Can-Am Maverick X3 X RS Turbo RR 2020+
- Can-Am Maverick X3 X MR Turbo 2018+
- Can-Am Maverick X3 X MR Turbo R 2018-2019
- Can-Am Maverick X3 X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX Turbo 2017+
- Can-Am Maverick X3 MAX Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo RR 2020+
- Can-Am Maverick X3 MAX X MR Turbo R 2019+
- Can-Am Maverick X3 MAX X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX X DS Turbo 2017-2019
- Can-Am Maverick X3 MAX X DS Turbo R 2020+
- Can-Am Maverick X3 MAX X DS Turbo RR 2020+
The Can-Am Maverick X3 can be used to race the track, jump through the dunes, or even cruise the trails. With such diversity of this UTV, some just need to tow! For those that want the convenience of a tow hitch, Agency Power has this amazing new product. The 2" tow hitch can be used to add a bike or utility rack, connect a small trailer, or whatever purpose you want to use it for. But what makes the Agency Power tow hitch for the Can-Am X3 even better is the rigidity it adds to the factory mounting points of the rear radius rods. The thicker plate reinforces the chassis to prevent unnecessary flex that can occur under hard use. In addition, the tow hitch also features a gusset style U brace on either side of the tow hitch receptacle that can also be used for strapping down the Can-Am X3 or other uses.
The Agency Power Can-Am X3 Hitch Receiver is Made in the USA. It features 3/16" thick cold rolled steel plate that has been cut out by water jet to our specific CAD design. Each piece is precision TIG welded to ensure strong, structural welds. The hitch is then finished in a high quality powder coat in gloss red or matte black finish.
Features:
- View Install Instructions Here
- Provides Additional Structural Rigidity to Rear Radius Rod Mounting Points
- 2" ID Receiver Using 2.5" 0.238 Wall Square Tube and has a 5/8 thru hole
- 0.188" Thick Rolled Steel (11 gauge) Plate
- Stylish Design with Agency Power Logo
- Powder Coated Satin Black
- Made in the USA
Fitment:
- Can-Am Maverick X3 900 2018
- Can-Am Maverick X3 Turbo 2017+
- Can-Am Maverick X3 Turbo R 2017-2019
- Can-Am Maverick X3 X DS Turbo R 2017+
- Can-Am Maverick X3 X DS Turbo RR 2020+
- Can-Am Maverick X3 X RC Turbo 2018+
- Can-Am Maverick X3 X RC Turbo R 2018+
- Can-Am Maverick X3 X RC Turbo RR 2020+
- Can-Am Maverick X3 X RS Turbo R 2017+
- Can-Am Maverick X3 X RS Turbo RR 2020+
- Can-Am Maverick X3 X MR Turbo 2018+
- Can-Am Maverick X3 X MR Turbo R 2018-2019
- Can-Am Maverick X3 X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX Turbo 2017+
- Can-Am Maverick X3 MAX Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo R 2017+
- Can-Am Maverick X3 MAX X RS Turbo RR 2020+
- Can-Am Maverick X3 MAX X MR Turbo R 2019+
- Can-Am Maverick X3 MAX X MR Turbo RR 2020+
- Can-Am Maverick X3 MAX X DS Turbo 2017-2019
- Can-Am Maverick X3 MAX X DS Turbo R 2020+
- Can-Am Maverick X3 MAX X DS Turbo RR 2020+
When out riding with your friends it can be tough to distinguish one machine from another. Many owners resort to modifying their Can-Am X3 to prevent this, but at night certain features can become invisible. With everyone using bright light bars, each machine seems to blend together at night. The solution for this is Agency Power whip light mounting brackets that easily mount to the rear of the vehicle to allow the use of whip lights
Extending above the machine, whip lights allow people nearby to identify your machine at night and add an extra flair of style. Whether it is a solid color or a flashing pattern, whip lights can be extremely useful when riding at night. In the event of an unforeseen incident, the machine can easily be located and identified from afar with the use of whip lights.
Agency Power makes the daunting task of mounting whip lights easy with our new whip light mount brackets. Simply bolt the heavy-duty stainless steel brackets to the factory roll cage of your X3 and mount your whips! The sturdy stainless steel construction can withstand the hardest of hits while keeping your whips secure. An additional feature of the Agency Power whip light mounting brackets is elongated slots to mount pod lights to the side of your machine. Adding whips and pod lights will help distinguish your machine from others. A bottle opener is also incorporated into the whip bracket for when you get back to the campsite to kick back and relax.
Features:
- Made in the USA!
- Heavy-duty laser cut stainless steel construction
- Allows easy installation of whip lights
- Elongated slots offer pod light mounting
- Laser etched Agency Power logo
- Black powder coat finish to protect against corrosion
- Integrated bottle opener for after the ride
Fitment:
- Can-Am Maverick X3 2017+
Notes:
- Sold Individually
- View Installation Instructions Here
When out riding with your friends it can be tough to distinguish one machine from another. Many owners resort to modifying their Can-Am X3 to prevent this, but at night certain features can become invisible. With everyone using bright light bars, each machine seems to blend together at night. The solution for this is Agency Power whip light mounting brackets that easily mount to the rear of the vehicle to allow the use of whip lights
Extending above the machine, whip lights allow people nearby to identify your machine at night and add an extra flair of style. Whether it is a solid color or a flashing pattern, whip lights can be extremely useful when riding at night. In the event of an unforeseen incident, the machine can easily be located and identified from afar with the use of whip lights.
Agency Power makes the daunting task of mounting whip lights easy with our new whip light mount brackets. Simply bolt the heavy-duty stainless steel brackets to the factory roll cage of your X3 and mount your whips! The sturdy stainless steel construction can withstand the hardest of hits while keeping your whips secure. An additional feature of the Agency Power whip light mounting brackets is elongated slots to mount pod lights to the side of your machine. Adding whips and pod lights will help distinguish your machine from others. A bottle opener is also incorporated into the whip bracket for when you get back to the campsite to kick back and relax.
Features:
- Made in the USA!
- Heavy-duty laser cut stainless steel construction
- Allows easy installation of whip lights
- Elongated slots offer pod light mounting
- Laser etched Agency Power logo
- Black powder coat finish to protect against corrosion
- Integrated bottle opener for after the ride
Fitment:
- Can-Am Maverick X3 2017+
Notes:
- Sold Individually
- View Installation Instructions Here
Get the most stylish doors for your Can-Am Maverick X3 Max with this package from Vivid Racing. The package includes the front and rear Agency Power carbon fiber doors. Upgrading the doors on the Can-Am Maverick X3 is one of the first mods most people do. This is to prevent debris from hitting you below the half doors that come from the factory. While there are many aluminum door products out there, Agency Power has designed the ultimate door upgrade available! These doors are a full 1 piece carbon fiber construction designed to fit with the stock door metal frames. Even the factory door latch mechanism is retained. The interior of the doors are a black gel coat finish. With the addition of a door bag or pad, the inside of the cockpit is extremely functional like stock. The doors are designed to be lightweight and sturdy to take abuse. The exterior of the doors is a 2x2 carbon weave with a high gloss clear coat finish. For those wanting to avoid scratches or rock chips, Agency Power recommends having the doors covered in clear bra similar to a car’s front bumper or we offer Ceramic Coating optionally. The carbon fiber doors are a great upgrade to really make you stand out amongst other Can-Am X3 owners!
Sold as a set of Front and Rear doors.
Features:
- Carbon fiber construction
- Full door protection
- Designed as an OEM replacement
- Works with factory frame and door latch
- Lightweight design
Options:
- Ceramic Coating Available to Keep Up Finish and Improve Durability
Fitment:
- 2017-2019 Can-Am X3 Turbo Max 4 Door
Includes:
- 1 set of AP-BRP-X3-660 carbon fiber front doors
- 1 set of AP-BRP-X3-665 carbon fiber rear doors
Note:
- Does not include the door frames or hardware. This product is a replacement for the factory plastic and is designed to work with the factory door frames. Lower door frames are recommended for added rigidity. You can use the OEM Can-Am ones or fabricate some to work like OEM.
Upgrading the doors on the Can-Am Maverick X3 Max is one of the first mods most people do. This is to prevent debris from hitting you below the half doors that come from the factory. While there are many aluminum door products out there, Agency Power has designed the ultimate door upgrade available! The new Agency Power carbon fiber doors for the Can-Am Maverick X3 are available to fit the rear door of any X3 Max.
These rear doors are a full 1 piece carbon fiber construction designed to fit with the stock upper door metal frames. The doors also use the factory latch mechanism so you can easily open and close the door. The interior of the doors are a black gel coat finish. With the addition of a door bag or pad, the inside of the cockpit is extremely functional like stock. The doors are designed to be lightweight and sturdy to take abuse. The exterior of the doors are a 2x2 carbon fiber weave with a high gloss clear coat finish. Complete the great look by adding the Agency Power matching carbon fiber front doors.
For those wanting to avoid scratches or rock chips, Agency Power recommends having the doors covered in clear bra similar to a car’s front bumper. We also offer a ceramic coating finish that is optional. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber rear doors are a great upgrade to really make you stand out amongst other Can-Am X3 Max owners!
These are rear door sets ONLY. Front door sets are sold separately.
Features:
- Carbon Fiber Construction
- Full Door Protection
- 1 Piece Door Design
- Designed as an OEM Replacement
- 2x2 Carbon Weave
- High Gloss Clear Coat with Interior Black Gel Coat Finish
- Works with Factory Frame and Door Latch
- Lightweight Design
Options:
- Ceramic Coating Available to Keep Up Finish and Improve Durability
Fitment:
- 2017+ Can-Am X3 Max Turbo, X3 Max Turbo R, X3 Max X DS Turbo R, X3 Max X RS Turbo R
Notes:
- Does not include the door frames or hardware. This product is a replacement for the factory plastic and is designed to work with the factory door frames. Lower frames are not required but for the best support, we recommend using the factory Can-Am lower door frames or fabricating some to attach the door too.
Upgrading the doors on the Can-Am Maverick X3 is one of the first mods most people do. This is to prevent debris from hitting you below the half doors that come from the factory. While there are many aluminum door products out there, Agency Power has designed the ultimate door upgrade available! The new Agency Power carbon fiber doors for the Can-Am Maverick X3 are available to fit the 2 door and 4 door X3 Turbo, X3 X DS Turbo R, and the X3 X RS Turbo R. These doors are a full 1 piece carbon fiber construction designed to fit with the stock door metal frames. Even the factory door latch mechanism is retained. The interior of the doors are a black gel coat finish. With the addition of a door bag or pad, the inside of the cockpit is extremely functional like stock. The doors are designed to be lightweight and sturdy to take abuse. The exterior of the doors is a 2x2 carbon weave with a high gloss clear coat finish. For those wanting to avoid scratches or rock chips, Agency Power recommends having the doors covered in clear bra similar to a car’s front bumper or we offer Ceramic Coating optionally. Agency Power has been in the carbon fiber business for many years. Our high quality carbon components have been used in many applications from racing seats to exotic vehicle parts. The carbon fiber doors are a great upgrade to really make you stand out amongst other Can-Am X3 owners!
Sold as FRONT doors only. Rear doors sold separately.
Features:
- Carbon fiber construction
- Full door protection
- Designed as an OEM replacement
- Works with factory frame and door latch
- Lightweight design
Options:
- Ceramic Coating Available to Keep Up Finish and Improve Durability
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 Door
- Will also fit the front of the Can-Am X3 Max
Note:
- Does not include the door frames or hardware. This product is a replacement for the factory plastic and is designed to work with the factory door frames. Lower door frames are recommended for added rigidity.
Step up the styling of your Can-Am Maverick X3 with the new Agency Power premium front grill. The two piece grill gives you a new eye catching front end with the Agency Power unique webbed styling. The precision cut inner and outer pieces are slightly offset so the back color pops from behind. The front plate features the AP logo which stands out nicely with the two tone design. The two pieces are attached with stainless steel button head hardware to provide a secure fit. Each grill kit includes angled spacers to allow for an easy installation. The Can-Am Maverick X3 grilles have been designed to be a perfect OEM replacement without any modifications required. The front part of the grills are powder coated in a matte black finish while the rear are powder coated in popular colors such as yellow, gold, red, white.
Features:
- View Install Guide Here
- Powder coated finish in popular colors
- Designed as an OEM replacement
- Durable construction
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 | 4 Door
Step up the styling of your Can-Am Maverick X3 with the new Agency Power premium front grill. The two piece grill gives you a new eye catching front end with the Agency Power unique webbed styling. The precision cut inner and outer pieces are slightly offset so the back color pops from behind. The front plate features the AP logo which stands out nicely with the two tone design. The two pieces are attached with stainless steel button head hardware to provide a secure fit. Each grill kit includes angled spacers to allow for an easy installation. The Can-Am Maverick X3 grilles have been designed to be a perfect OEM replacement without any modifications required. The front part of the grills are powder coated in a matte black finish while the rear are powder coated in popular colors such as yellow, gold, red, white.
Features:
- View Install Guide Here
- Powder coated finish in popular colors
- Designed as an OEM replacement
- Durable construction
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 | 4 Door
Step up the styling of your Can-Am Maverick X3 with the new Agency Power premium front grill. The two piece grill gives you a new eye catching front end with the Agency Power unique webbed styling. The precision cut inner and outer pieces are slightly offset so the back color pops from behind. The front plate features the AP logo which stands out nicely with the two tone design. The two pieces are attached with stainless steel button head hardware to provide a secure fit. Each grill kit includes angled spacers to allow for an easy installation. The Can-Am Maverick X3 grilles have been designed to be a perfect OEM replacement without any modifications required. The front part of the grills are powder coated in a matte black finish while the rear are powder coated in popular colors such as yellow, gold, red, white.
Features:
- View Install Guide Here
- Powder coated finish in popular colors
- Designed as an OEM replacement
- Durable construction
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 | 4 Door
Step up the styling of your Can-Am Maverick X3 with the new Agency Power premium front grill. The two piece grill gives you a new eye catching front end with the Agency Power unique webbed styling. The precision cut inner and outer pieces are slightly offset so the back color pops from behind. The front plate features the AP logo which stands out nicely with the two tone design. The two pieces are attached with stainless steel button head hardware to provide a secure fit. Each grill kit includes angled spacers to allow for an easy installation. The Can-Am Maverick X3 grilles have been designed to be a perfect OEM replacement without any modifications required. The front part of the grills are powder coated in a matte black finish while the rear are powder coated in popular colors such as yellow, gold, red, white.
Features:
- View Install Guide Here
- Powder coated finish in popular colors
- Designed as an OEM replacement
- Durable construction
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 | 4 Door
