Side by Side Outlet Parts and Accessories
The Polaris RZR Turbo needs an exhaust system to help the turbocharger flow freely and improve performance. Agency Power has created the best exhaust system that is a simple plug and play for the RZR XP Turbo platform. The twin tip, side exit exhaust was designed to balance exhaust flow without causing obnoxious noise over the factory unit. The system is built from T304 stainless steel and features precision TIG welds. The dual high flow resonators are secured in place with a laser cut cradle that features the AP logo. The type of resonators used can be seen in many of the Agency Power high performance vehicle exhausts, which on turbo cars, produce a beautiful sound. Designed as a direct replacement, the Agency Power exhaust uses the factory hanger locations and bolts up to the stock turbo pipe without modifications. The exhaust features a thick flange and includes a new gasket with hardware. Each tip outlet has been designed to work with spark arrestors that can be optionally purchased. The final product is completely polished for a show finish giving the rear end of the RZR Turbo a sexy look with a satisfying sound. As tested on our Mustang Dyno, the exhaust gained about 5-6 peak horsepower over stock. Even more important testing was proven when XTC Power Sports ran this exhaust system on their 2017 competition vehicle during the grueling 500+ mile Vegas to Reno race. The exhaust is a great addition to any RZR XP Turbo along with our other Agency Power Polaris accessories.Features:
- Polished Stainless Steel Constructions
- Precision TIG Welding
- Clean and Satisfying Sound
- Direct Bolt-On
- Can be used with Spark Arrestors
- Race Proven
Fitment:
- Polaris RZR XP Turbo 16-18
- Polaris RZR XP4 Turbo 16-18
Adding a vent to atmosphere Blow Off Valve on the Polaris RZR turbo system is a great way to improve throttle response and hear that awesome blow off valve turbo sound. With an ECU tune and higher boost levels, the Polaris RZR can gain 10-15% more power over stock. However the stock plastic diverter valve is ill equipped to handle this increase. One option is to replace this valve with an aftermarket diverter valve like Agency Power also offers. But for those that want to hear the whoooosh sound, there is this adjustable vent to atmosphere blow off valve! The purpose of a BOV is not just to sound cool, but it is designed to release the pressure that is built up in the charge side of the system. The factory diverter valve system dumps this pressure back down into the intake pipe. This can cause turbulence to the impeller, slowing the spool of the turbo down and causing premature wear.
The Agency Power blow off valve for the Polaris RZR can be used in conjunction with the stock turbo inlet pipe or any aftermarket turbo hose pipe that has a 1 inch BOV flange. Since the factory valve is a diverter valve and this new valve is designed to be 100% vent to atmosphere, we include a high-temp push on plug cover for the eliminated return hose. Each Agency Power valve is machined from 6061 billet aluminum then anodized in a stealth black finish. The top is laser engraved with the Agency Power cursive logo and directions for adjusting. When the top of the valve rotates, this allows you to adjust the spring tension for your application. You can set the valve to easily vent off pressure or be stiffer to only vent at maximum PSI.
Features:
- CNC Machined Aluminum Constructions
- Anodized Black
- Adjustable
- Pro Longs Turbocharge Life
- Great Blow Off Valve Sound!
Notes:
- View Installation Instructions
- Includes Fitting Kit
Fitment:
- 2016-2019 Polaris RZR Turbo 2 | 4 Door
The Polaris RZR XP Turbo and Turbo S can take the factory drive belt to its limit with performance upgrades and hard driving. Knowing that the drive belt is a critical piece to your Polaris RZR Turbo, Agency Power now has this upgraded performance drive belt. The new Agency Power Drive Belt has a double notch design that is a direct replacement for the OEM Polaris belt. Each belt uses a Kevlar fiber construction to give the belt more strength, along with better chemical and heat resistance. As a direct factory replacement belt, installation is the same with the upgraded Agency Power performance belt. Now you can ride with confidence to deliver the power you want to the ground and keep your weekends going!
Features:
- Kevlar Reinforced
- Double Notch Design
- Factory Replacement
- Stronger and More Chemical Resistant
- Replaces OEM Part Number:
- 3211186
- 3211202
Fitment:
- 2016-2019 Polaris RZR XP Turbo and XP4 Turbo
- 2018-2019 Polaris RZR XP Turbo S and XP4 Turbo S
- 2018-2019 Polaris RZR RS1
- 2018-2019 Polaris Ranger XP 1000
- 2019 Polaris Ranger Crew XP 1000
Note:
- Proper belt break-in:
- Vary your speed and engine RPM to allow belt to shift through normal operational range
- During the first 30 miles of installation do not exceed ¾ throttle
- Every 15 minutes of use stop engine and allow belt to cool down
- Avoid the following activities during break-in:
- Aggressive acceleration or jerky throttle at low speeds
- Holding speed or RPM constant for extended time periods
- Pulling heavy loads
- Excessive driving without CVT/belt cool down
The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.
Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2016-2019 Polaris RZR XP Turbo
- 2018-2019 Polaris RZR Turbo S
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.
Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2016-2019 Polaris RZR XP Turbo
- 2018-2019 Polaris RZR Turbo S
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
The Agency Power Cold Air Intake System for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. The new air intake kit changes out the stock corrugated rubber intake tube and paper mesh filter to the Agency Power durable silicone J-tube and our high flow reusable air filter. This easy upgrade will be a huge benefit to the performance of your Polaris RZR Turbo. The J-tube and filter are direct replacements for factory allowing use of the factory air inlet and box to protect and aid in air flow. By adding the Agency Power Cold Air Intake System, you will notice an increase in horsepower, torque, throttle response, and overall improved drivability on the RZR Turbo.
Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
The Agency Power silicone tube replaces the factory rubberized intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also offer an easy installation between the turbocharger and stock air box. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there are no modifications that need to be done for installation. Each silicone intake tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue, includes all clamps along with needed hardware, and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- 2016-2019 Polaris RZR XP Turbo
- 2018-2019 Polaris RZR Turbo S
Note:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
Th Agency Power Silicone Intake J-Tube for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. This new silicone tube replaces the factory plastic intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also a easy installation between the turbo and airbox. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there is no modifications that need to be done for installation. Each silicone charge tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue and features the AP logo.Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Th Agency Power Silicone Intake J-Tube for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. This new silicone tube replaces the factory plastic intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also a easy installation between the turbo and airbox. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there is no modifications that need to be done for installation. Each silicone charge tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue and features the AP logo.Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Th Agency Power Silicone Intake J-Tube for the Polaris RZR XP Turbo is a great upgrade to help improve air flow from the intake to the turbocharger. This new silicone tube replaces the factory plastic intake tube. The silicone tube has been designed not only to enhance the performance of your RZR Turbo but also a easy installation between the turbo and airbox. Each tube is constructed using 3 ply silicone material with a smooth inside that helps eliminate any turbulence caused by corrugated designs. The silicone intake tube is much stronger and durable than the factory tube allowing it to hold up much better to the harsh elements. As a simple add-on upgrade, there is no modifications that need to be done for installation. Each silicone charge tube includes a MAP sensor port, crankcase breather port, and blow off valve port to work with factory components. The Agency Power silicone J-Tube is available in black, red, or blue and features the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
The Agency Power Silicone Turbo Inlet Charge Tube is a great upgrade for your Polaris RZR Turbo. The new silicone tube replaces the factory plastic unit that connects to the compressor side of your turbocharger and throttlebody. The new 3 ply silicone construction is very durable with a smooth design that helps eliminate any turbulence caused by the factory corrugated tube. This enchanced silicone charge tube provides much needed airflow efficiency. Designed as a simple add-on upgrade that all Polaris RZR Turbo owners will be glad they did. Agency Power includes an extra vacuum port on the charge tube for those looking to add an aftermarket boost gauge or need to the vacuum source. Each silicone charge tube includes all clamps and hardware needed for installation. A CNC machined aluminum MAP sensor port and blow off valve port are included to work with factory components. Hoses are available in black, red, blue and feature the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
- Additional Vacuum Port
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Note:
The Agency Power Silicone Turbo Inlet Charge Tube is a great upgrade for your Polaris RZR Turbo. The new silicone tube replaces the factory plastic unit that connects to the compressor side of your turbocharger and throttlebody. The new 3 ply silicone construction is very durable with a smooth design that helps eliminate any turbulence caused by the factory corrugated tube. This enchanced silicone charge tube provides much needed airflow efficiency. Designed as a simple add-on upgrade that all Polaris RZR Turbo owners will be glad they did. Agency Power includes an extra vacuum port on the charge tube for those looking to add an aftermarket boost gauge or need to the vacuum source. Each silicone charge tube includes all clamps and hardware needed for installation. A CNC machined aluminum MAP sensor port and blow off valve port are included to work with factory components. Hoses are available in black, red, blue and feature the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
- Additional Vacuum Port
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Note:
The Agency Power Silicone Turbo Inlet Charge Tube is a great upgrade for your Polaris RZR Turbo. The new silicone tube replaces the factory plastic unit that connects to the compressor side of your turbocharger and throttlebody. The new 3 ply silicone construction is very durable with a smooth design that helps eliminate any turbulence caused by the factory corrugated tube. This enchanced silicone charge tube provides much needed airflow efficiency. Designed as a simple add-on upgrade that all Polaris RZR Turbo owners will be glad they did. Agency Power includes an extra vacuum port on the charge tube for those looking to add an aftermarket boost gauge or need to the vacuum source. Each silicone charge tube includes all clamps and hardware needed for installation. A CNC machined aluminum MAP sensor port and blow off valve port are included to work with factory components. Hoses are available in black, red, blue and feature the AP logo.
Features:
- 3 Ply Silicone Construction
- Stealth Black Look
- Simple Bolt On
- Additional Vacuum Port
Fitment:
- 2016-2018 Polaris RZR XP Turbo
- 2016-2018 Polaris RZR XP4 Turbo
- 2018 Polaris RZR Turbo S
Note:
