Side by Side Outlet Parts and Accessories
PATENTED, billet aluminum, laser engraved, upper strap mounts Adjustable, tight clearance clevis system allowing you to adjust the strap length perfectly Quad layered straps for the best strength and longevity PATENTED, tether system that locates the strap next to the shock at full compression Accurate sized holes in the strap ends to match the metric hardware in your car Stainless steel spacers that don't rust or flex like aluminum spacers can Grade 8 hardware with pinch nuts Mounting system with the least leverage on the strap Less strap stretch and longer strap life Added life for your CVs and Axles and STOPS ALL EXTENSION CLUNKING!
Shock Therapy Toe link Kits for the Polaris RZR Turbo R and Polaris RZR Pro R are here!
They are made of 1.25" 120 wall chromoly tube to increase strength and eliminate flexing. The spuds on each end are welded with a rosette for increased strength and durability. The clevises provided in each kit are machined from one piece high carbon steel. The rod ends in each kit are Teflon lined 3/4" chromoly rod ends. The design of the kit allows them to be adjusted while on the car.
***This part is sold in pairs***
Polaris RZR Pro R and Polaris RZR Turbo R Lower Front Shock Fork Made from 7075 Aluminum Patent Pending shock shaft support design that cures lower fork and shock shaft failures Allows for easy spring installation with loop in place Fits both FOX and Walker Evans shocks for RZR Pro R and RZR Turbo R models
Shock Therapy two-piece billet spring retainers are now available for the Polaris RZR Pro R and Polaris RZR Turbo R models. These retainers are for FRONT Live Valve and Walker Evans shocks only and must be used with the Shock Therapy Billet Front Lower Fork Kit. The fork kit is NOT included with these retainers but, can be purchased HERE. These retainers are sold in pairs.
Our high clearance radius rod kit for the Polaris RZR Pro R and Polaris RZR Turbo R is now available! The radius rods in this kit are made from 1 1/4" .120 wall chromoly and also utilize 7/8" race rod ends and 7/8" uniball joints for increased strength, durability, and adjustability.
Strap in and hold on tight, because Dynojet’s Stage 4 Power Package for the Polaris RZR ProXP or Turbo R means serious power gains — up 40 more wheel horsepower than stock! You’ll get a Dynojet Power Vision 3 flash tuner pre-loaded with performance tunes, an adjustable clutch kit, durable charge tubes and a water-cooled turbocharger upgrade with wastegate.
Crave more wheel horsepower for your Polaris RZR ProXP? Get your hands on this upgraded turbocharger. Featuring a water-cooled center housing & rotating assembly, this turbo (in conjunction with a durable Dynojet J-tube) helps you send it to the max.
Vehicle Applications:
• Can-Am Defender HD 10 XT Cab : 2018+ • Can-Am Defender HD 10 XMR: 2018+ • Can-Am Defender HD10 MAX Limited : 2020+ • Can-Am Defender HD 8 XT Cab: 2018+ • Can-Am Defender HD 10 XT Cab: 2018+ • Can-Am Defender MAX HD 10 XMR : 2018+ • Can-Am Defender MAX HD10 Lone Star Edition : 2018+
- 18.5Lbs Total
- High Grade 304 Stainless Steel
- Full 3" Design
- Dual O2 Bungs
- Utilizes Factory Tip & Spark Arrestor
- Includes Turbo Side HD Clamp
- V-Band Flange Assembly's
- Perforated, Internally Baffled Muffler
- 100% TIG Welded
- Great Sound Without Being To Loud
- Comes with EVERYTHING Needed for Install
- Tuning Recommended But NOT Required!
** For ease of uninstalling the stock exhaust, we recommend our SPRING HOOK TOOL
- Race Weight @ 4.5Lb's- 304 Stainless- Fully Tig Welded- Mounts To Stock Or Aftermarket Header- No Tune Required
- Brushed 304 Stainless
- Fully Tig Welded
- Highly Efficient Collectors
- OEM Fitment & Uses OEM Gaskets
- Retains Factory Heat Shield
- Dual O2 Bungs
- 10.5 LB's
- No Tune Required
FITS 2 & 4 SEAT PRO XP & TURBO R 2020-2023
FEATURES
17LBS TOTAL WEIGHT. 9LB SAVINGS 304 STAINLESS STEEL FULL 3" DESIGN DUAL O2 BUNGS UTILIZES FACTORY REAR FASCIA INCLUDES NEW GRADE 8 MANIFOLD BOLTS INCLUDES NEW TURBO FLANGE GASKET V-BAND SS FLANGE ASSEMBLY 100% TIG WELDED GREAT DEEP SOUND WITHOUT BEING LOUD COMES WITH EVERYTHING NEEDED FOR INSTALL TUNING RECOMMENDED BUT NOT REQUIRED! ** FOR EASE OF UN / INSTALLING THE STOCK MUFFLER, WE RECOMMEND OUR SPRING HOOK TOOL
Features:
- Silicone Charge Tube With BOV Port
- Billet / Stainless Manifold Reference Port
- Silicone Reference port line ( 24" )
- Simple Bolt On Modification
Fitment: All 120hp Non Intercooled X3 Turbo models! 2&4 Seat.
OLD Style, SAME great sound!
HALF DOORS Fortress Half Doors are constructed from solid steel. Rubber trim around all edges provides a rattle-free seal and dual latching handles assure a solid close every time. The 3-piece design allows for endless customization options. (Exterior handles not included)
FULL DOORS Turn your existing Fortress Half Doors for Polaris to full doors with this upper attachment! Made of 14-gauge powder coated steel with scratch resistant polycarbonate windows this attachment is perfect for any situation. The vertical sliding windows provide maximum accessibility for occupants while the vent windows maximize airflow into the cab. (Exterior handles included)
Fits all two door models of Ranger 1000XP 2018+
HALF DOORS Fortress Half Doors are constructed from solid steel. Rubber trim around all edges provides a rattle-free seal and dual latching handles assure a solid close every time. The 3-piece design allows for endless customization options. (Exterior handles not included)
FULL DOORS Turn your existing Fortress Half Doors for Polaris to full doors with this upper attachment! Made of 14-gauge powder coated steel with scratch resistant polycarbonate windows this attachment is perfect for any situation. The vertical sliding windows provide maximum accessibility for occupants while the vent windows maximize airflow into the cab. (Exterior handles included)
Our 2022-2023 Polaris RZR Pro R 4-Seat Fox Dynamics Stage 1 Spring Kit is the best and most cost-effective spring kit upgrade available for delivering race-inspired performance and control for the RZR Pro R. This kit will deliver a plush and smoother ride in washboard bumps and whoops while also adding increased bottoming resistance and reduced body roll.
Vehicle Applications:
- RZR Pro R 4-Seat Fox Dynamics Shocks 2022-2023
Our 2022-2023 Polaris RZR Pro R Fox Dynamics Stage 1 Spring Kit is the best and most cost-effective spring kit upgrade available for delivering race-inspired performance and control for the RZR Pro R. This kit will deliver a plush and smoother ride in washboard bumps and whoops while also adding increased bottoming resistance and reduced body roll.
Vehicle Applications:
- 2-Seat RZR Pro R Fox Dynamics Shocks 2022-2023
Shock Therapy Toe link Kits for the Polaris RZR Turbo […]
***This part is sold in pairs***Polaris RZR Pro R and Polaris RZR Turbo R Lower Front Shock Fork- Made from 7075 Aluminum
- Patent Pending shock shaft support design that cures lower fork and shock shaft failures
- Allows for easy spring installation with loop in place
- Fits both FOX and Walker Evans shocks for RZR Pro R and RZR Turbo R models
Sticky shifting or excessive gear clash? The shift cables can wear out or break over time. This complete cable assembly will install and work just like stock. Heavy duty stainless steel end fittings at both ends for corrosion resistance and longevity. Replaces Polaris part number 7081862. Fits the following models:
2014-21 RZR 1000 XP (Standard chassis only, does not fit 4 seater)2016-21 RZR Turbo including Turbo “S” (Standard chassis only, does not fit 4 seater)Replacement for the Polaris Part Number: 7081862
Sticky shifting or excessive gear clash? The shift cables can wear out or break over time. This complete cable assembly will install and work just like stock. Heavy duty stainless steel end fittings at both ends for corrosion resistance and longevity. Replaces Polaris part number 7081893. Fits the following models:
2014-21 RZR-4 1000 XP (Fits 4 seater models only)2016-21 RZR-4 Turbo Including Turbo “S” (Fits 4 seater models only)Replacement for the Polaris Part Number: 7081893
Made of billet aluminum and then anodized, these grab handles not only look great, but the hand grip texturing is UNMATCHED. These are made here in Idaho Falls.
Manufactured right here in Idaho Falls! These belt holders not only look good, but they serve a vital purpose to every belt driven machine! Orders yours NOW as we only do limited runs and once they are out, they are out! If you have questions about fitment, please call!
- Constructed of strong, lightweight aluminum & TIG-welded.
- Direct replacement for stock plastic seat base.
- Retains factory slider function on seats.
- Increased strength compared to OEM base.
- Works with stock or aftermarket seats.
- Utilizes stock hardware & quick disconnect latch.
- Sold each.
*Please note this mount lifts you 1.5" in height when installed
BONUS- FREE Catch Bottle, Syringe and Filler Cap Wrench
NOTE- Reservoir Adapter Cap NOT Included. Sold separately.
2006-2009 Yamaha YXR 450F Rhino 4x4 - - 2004-2007 Yamaha YXR 660F Rhino 4x4 
----Features----
- OEM style Cellulose air filter
- OEM level protection without the cost
- Direct OEM Replacement
----Features----
- OEM style Cellulose air filter
- OEM level protection without the cost
- Direct OEM Replacement
----Features----
- OEM style Cellulose air filter
- OEM level protection without the cost
- Direct OEM Replacement
----Features----
- OEM style Cellulose air filter
- OEM level protection without the cost
- Direct OEM Replacement
----Features----
- OEM style Cellulose air filter
- OEM level protection without the cost
- Direct OEM Replacement
- Unsurpassed in airflow, stopping dirt and overall performance
- Two-stage air filters come apart for maximum airflow and ultimate cleaning
- Most filters feature the Ultra Seal grease groove on the sealing surface
- Each fits in stock airbox exactly like OEM filter
- Clean easily with grease-cutting dishwashing detergent; just clean, oil and reuse indefinitely
- See Lubes section for cleaner and service kit
- Made in the U.S.A.
----Features----
- OEM style Cellulose air filter
- OEM level protection without the cost
- Direct OEM Replacement
