Side by Side Outlet Parts and Accessories
-Fits 2019 Honda Talon models only
- General Purpose (GP) Polycarbonate
- Features an easy sliding adjustable vent
- Easy Installation. No tools required.
- Includes all necessary hardware
- Trailerable with Full Front Windshield and Roof
- Premium 1/4" MR-10 Lexan material is Hard-Coated & Scratch-Resistant
- Approximate height from center of cowl is 8 7/8"
- Easy on/off quick connect flip clamps
- Rubber Gasket along bottom to protect hood
- Sold as a pair
- Tinted 1/4" Polycarbonate provides visibility to navigate the tricky terrain
- Includes Automotive bulb seal for a good bottom edge seal
- Includes necessary hardware and instructions
- Made from .236" Hard-Coated & abrasive-resistant GE Lexan MR10
- Opens 3" or 5 1/2" for increased ventilation
- Easy installation- no drilling required!
- Extremely durable custom nylon injected clamps
- All hardware (nuts & bolts) is stainless steel with a black-coated finish- no rust!!
- Comes complete with all mounting hardware & detailed instructions
- Compatible with most aftermarket roofs
- Trailerable***
- Constructed of Ultra-Thick, Hard-Coated & Scratch Resistant ¼" Polycarbonate
- Features an adjustable sliding vent to allow air flow and reduce dust
- Extremely durable - clamps are custom injection molded
- Requires no tools to install or remove
- Super smooth edges
- Easy to install - NO Drilling required!
With this Connector, you can plug accessories into a Polaris Pulse Bar (New Rangers and Generals)
Black is Ground. Yellow is Key Power. Red is Constant Power.
- LIFETIME WARRANTY
- Mounts using factory door holes and supplied hardware
- Fits Polaris models* 14-19 RZR XP 1000 & Turbo, RZR XP4 1000 & Turbo, RZR 900, RZR 4 900 *Can fit 50” trail models if additional holes are drilled
- Protective front knee pad is removable for the maximum RZR storage
- UV-treated, water-resistant TriMax® fabric with Fibertech “carbon-like” accents
- Reverse coil zippers help keep out dust and dirt
- Works with these optional Lower Door bags RG-001L
- Dimensions: 23.5”L x 11”W x 2”D
- Holds 4.5 liters per side, sold as set
- LIFETIME WARRANTY
- Mounts on both front or rear factory Polaris optional lower doors
- Fits Polaris models 14-19 RZR XP 1000 & Turbo, RZR XP4 1000 & Turbo, RZR 900S/XC, RZR 4 900
- UV-treated, water-resistant TriMax® fabric with Fibertech “carbon-like” accents
- Reverse coil zippered single storage compartment
- Rubber coated oversized zip pullers operate easily with gloves
- Can work with optional RG-001U
- Dimensions: 24”L x 9W x 2.5”D
- Holds 7 liters per side, sold as set
- LIFETIME WARRANTY
- Mounts using rear factory door holes and supplied hardware
- UV-treated, water-resistant TriMax® fabric with Fibertech “carbon-like” accents
- Reverse coil zippers storage compartment
- Can work with optional Lower Door bags RG-001L
- Dimensions: 20.5”L x 11”W x 2”D
- Pocket size 10”L x 9”W x 2”D
- Fits Polaris models '14-'19 RZR XP4 1000 & Turbo, RZR 4 900
- Front knee pad for comfort and safety
- Holds 3 liters per side, sold as set
- LIFETIME WARRANTY
- Universally mounts using heavy duty plastic pins
- Includes template for pre-drilling holes for perfect alignment
- Fits door on most UTV’s
- Front pocket can also be used as knee pad for comfort and safety
- 2 zippered storage compartments are also lockable
- UV treated, water resistant Tri-Max Ballistic Nylon with Fibertech accents
- Rubber coated oversized zip pullers operate easily with gloves
- Reverse coil zippers help keep out dust and dirt
- Dimensions: 15.75”L x 7”W x 2”D
- Pocket Size 10”L x 6”W x 2”D
- Pocket Size 4.25”L x 6”W x 2”D
- Holds 3 liters per side
- Sold as a pair Left and Right
MANUFACTURER HAS DISCONTINUED
- LIFETIME WARRANTY
- Universally mounts using heavy duty plastic pins
- Includes template for pre-drilling holes for perfect alignment
- Fits door on most UTV’s
- Can be used as a knee pad for comfort or a pocket for storage
- Zippered storage compartment is lockable
- UV treated, water resistant Tri-Max Ballistic Nylon with Fibertech accents
- Reverse coil zippers help keep out dust and dirt
- Rubber coated oversized zip pullers operate easily with gloves
- Dimensions: 12”L x 6”W x 2”D
- Holds 2.36 liters per side
- Sold as a pair Left and Right
- LIFETIME WARRANTY
- Fits Can-Am Maverick X3 front factory doors
- UV-treated, water-resistant TriMax® fabric with Fibertech “carbon-like” accents
- Reverse coil zippered single storage compartment
- Rubber coated oversized zip pullers operate easily with gloves
- Dimensions: 24”L x 9W x 2.5”D
- Holds 7 liters per side, sold as set
('09-20) Commander
(13-18) Maverick 1000/Turbo Parts
(19+) Maverick Trail / Sport
(21+) Commander
A-Series "Rock Lights"
Ace
Audio
Cargo and Storage
CV Axle Parts and Tools
D-Series PRO "Pod Lights"
Defender
E-Series PRO "Double Row Light Bars"
FRONT DIFFERENTIALS
General
Maverick X3
Radiance "Backlit COLORS"
Ranger 500
Ranger 570
Ranger 700/800
Ranger 900/1000
Ranger 1000XP ('18+)
Roll Bar Clamps, Grab Handles, Harnesses
RS1
RZR 170 ('15-21)
RZR 570
RZR 800 ('08-14)
RZR 900 ('11-14)
RZR 900 ('15-20)
RZR 900 ('21+)
RZR 1000 XP ('14-18)
RZR 1000 XP ('19+)
RZR Pro XP ('20+)
RZR Turbo ('16-18)
RZR Turbo 19+
RZR Turbo S ('18-21)
SR-SERIES PRO "Single Row Light Bars"
Suspension
Talon
Tools, Chemicals, and Shop Stuff
Universal Accessories
Wildcat Trail/Sport
Wildcat X
Wildcat XX
Winch Mounts
YXZ