Side by Side Outlet Parts and Accessories
Replace the filter on your Agency Power intake with our new replacement air filters. More important to the performance is the air filtration. The factory paper mesh filter has to be thrown away and replaced when the time is due. It also easily clogs up with dust and dirt. Agency Power's replacement air filter is designed to replace this factory air filter while still using the stock air box. The custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media have sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured compared to the stock paper filter. This filter is reusable allowing you to easily clean it between rides.
These filters are dry and do not require a cleaner or oil re-charger kit. Do NOT OIL our Super-Nano Dry filters. This superior filter is a surface loading filter, to clean them, you simply reverse the airflow. Use 35 psi air pressure and blow your filter out from the inside. Another way to clean the filter is to use a common house-hold shop vacuum with a wand adapter and simply clean the surface of the filter. You will see all the loose contaminants come right off, you may also notice normal discoloration over time. Another feature on the Super-Nano Web filter is, the built in Velocity Stack Adapter, that streamlines the filtered air efficiently into the intake tract. If you will place your hand inside the mouth of the filter you will feel a smooth transition on the inside neck of your filter, this eliminates air turbulence.
To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
Features:
- Direct Replacement for Agency Power Cold Air / Short Ram Intake Systems
- High Flow, Reusable Air Filter
- Simple Bolt On
Fitment:
- Polaris RZR RS1 2018-2020
- 2017-2019 BMW M240i
Note:
- Understanding cleaning and filter technology Read Here
If you have the Agency Power big brake kit for the Can-Am Maverick X3, these are replacement brake pads for the front calipers. These pads are a Hawk HP+ compound.
- Front Caliper
- For big brake kit only
- SOLD PER AXLE
If you have the Agency Power big brake kit for the Can-Am Maverick X3, these are replacement brake pads for the rear calipers. These pads are a ceramic compound.
- Rear Caliper
- For big brake kit only
- SOLD PER AXLE
Agency Power is thrilled to introduce the Yamaha YXZ1000R Performance Slip-On Exhaust. This exhaust was designed to creates a smooth, high performance exhaust note to match the aggressive styling of the YXZ. The straight through design allows exhaust gasses to maintain velocity without a buildup of back pressure inside of the system, improving engine response and power delivery. Power builds earlier and extends through redline, creating usable power you can use on or off the trails.
Constructed using high quality 304 stainless steel, this exhaust features a mandrel bent 2 inch inlet. This inlet provides a smooth transition to the header utilizing a slip-fit connection to ensure a tight seal and an easy installation. The exhaust then travels through a 5 inch canister packed with sound dampening material to eliminate unwanted frequencies and smooth out the tone of the 11.3:1 compression 998cc YXR1000R engine. Exhaust is then expelled through a 3 inch flared tip, directing spend gasses clear of the vehicle. The Agency Power YXZ1000R Performance Slip-On Exhaust defines the sport SxS experience and is a must have for any YXZ enthusiast.
Features:
- Straight Through 5 Inch Exhaust Canister Provides Optimal Power and Exhaust Tone
- Manufactured from High Quality 304 Stainless Steel for Durability Engineered to Last
- 2 Inch Inlet Mates Directly to the Factory Type Exhaust
- 3 Inch Flared Tip Expells Exhaust Clear of the Vehicle
- Includes Necessary Hardware
Riding in the dunes is one of the best activities you can do with your UTV. One issue with riding in the dunes is the Bureau of Land Management (BLM) requires all riders to have safety flags attached to their machine at all times. This means that owners have to attach a whip that extends the flag 8-feet above the ground. The Agency Power universal whip is 5 feet which is within regulation. Most whip options are thin and break constantly which forces owners to repair or purchase new whips. The cheap and flimsy whips offered also don't offer much personalization and make it difficult to identify your machine from afar.
Agency Power combats this issue with customizable LED whips with 168 pre-programmed modes and multiple solid color options. These whips are brighter than the competition thanks to the increased amount of LEDs incorporated into the whip. Bringing a touch of color and personalization allows you to stand out from the rest and be recognized from the whips alone. The Agency Power LED whips are also legal for mounting your flag as required by the BLM.
Features:
- 168 pre-programmed light modes
- Comes with an Agency Power flag for the dunes
- Black anodizing to prevent corrosion
- Laser etched Agency Power logo
- Can be controlled through a downloadable app
- Offers personalization and customization
- Brighter than the competition
- Twice the amount of LEDs per whip
- Follows BLM regulations
- Allows owners to mount their flags
- Limited One-Year Warranty
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
Riding in the dunes is one of the best activities you can do with your UTV. One issue with riding in the dunes is the Bureau of Land Management (BLM) requires all riders to have safety flags attached to their machine at all times. This means that owners have to attach a whip that extends the flag 8-feet above the ground. The Agency Power universal whip is 5 feet which is within regulation. Most whip options are thin and break constantly which forces owners to repair or purchase new whips. The cheap and flimsy whips offered also don't offer much personalization and make it difficult to identify your machine from afar.
Agency Power combats this issue with customizable LED whips with 168 pre-programmed modes and multiple solid color options. These whips are brighter than the competition thanks to the increased amount of LEDs incorporated into the whip. Bringing a touch of color and personalization allows you to stand out from the rest and be recognized from the whips alone. The Agency Power LED whips are also legal for mounting your flag as required by the BLM.
Features:
- 168 pre-programmed light modes
- Comes with an Agency Power flag for the dunes
- Black anodizing to prevent corrosion
- Laser etched Agency Power logo
- Can be controlled through a downloadable app
- Offers personalization and customization
- Brighter than the competition
- Twice the amount of LEDs per whip
- Follows BLM regulations
- Allows owners to mount their flags
- Limited One-Year Warranty
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
Going to the dunes with your friends can yield memories that will last a lifetime. While the dunes are incredibly fun, there are a few rules and regulations you have to follow that can hinder your experience and take away from your time spent there. One of the biggest burdens when going to the dunes is unloading your machine and immediately having to install a safety flag before driving around. This can take some time and kills the initial excitement upon arrival.
Agency Power dropped a universal quick release whip mount to speed up the process of installing a whip to allow more time ripping the dunes. This simple solution will save you heaps of time and frustration. The 6061-T6 CNC machined aluminum construction is durable, innovative, and can withstand incredible stress. Installation is quick and easy by attaching the bottom of the whip to the top section of the quick release. The bottom half of the quick release will bolt up to your whip bracket(s) and secures the whip with a removable pin.
Features:
- Easy and fast installation
- Saves time and frustration when installing whips
- Fit's any standard sized 1/2-20 whip
- Constructed of 6061-T6 CNC machined aluminum
- Black anodized finish for sleek styling
- Designed, machined, and packaged in the USA!
- Limited One-Year Warranty
Notes:
- Agency Power Offers a One-Year Warranty Against Defects or Failures
- Product Warranties Are Available For Those Who Fill Out The Online Warranty Form HERE
- Warranty is Available With Original Invoice Showing Purchase Date
The new Agency Power billet aluminum wastegate is the perfect upgrade for your Can-Am X3 turbocharger. The new wastegate features a 1bar spring housed in an 85mm body. This design allows you to easily change springs and service the wastegate if needed. As a direct bolt-on to your factory turbo, the wastegate features an adjustable rod for those that would like to set your crack pressure specifically to your build. Perfect for those looking to get better boost response out of the stock tune, an ECU flashed car, or even a turbo upgrade.
Doing a back to back dyno test, we show how the wastegate improves boost response and performance over the stock wastegate. Set at 1 full turn in from neutral, the new Agency Power billet wastegate holds 1 psi more than stock gaining you 4hp.
Features:
- Billet Aluminum Design
- Direct Bolt On
- Adjustable Rod
- Stiffer Spring
Notes:
Fitment:
- 2017-2019 Can-Am X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R 2 | 4 Door
From the factory the Textron Wildcat XX is a very capable off-road vehicle. As with most vehicles from the factory, there is always more performance that can be had by swapping out a restrictive stock exhaust. The new Agency Power exhaust and header system is designed and engineered as a complete unit to let the high performance three-cylinder engine breathe freely. The bellow flex tube header adds flow and power while the race-ready muffler gives a unique sound. The unique titanium burnt and polished exhaust tip adds style over all other standard Wildcat XX exhausts. This package is a perfect addition for any owner looking for style, high performance and sound.
The Agency Power Header for the Wildcat XX is made from T304 stainless steel mandrel bent tubes that have been precision TIG welded. The header has a flange made to bolt to the factory heads, a bung to re-install the factory O2 sensor along with a new V-band clamp to connect to the Agency Power exhaust muffler. The pipe diameters off the heads are quickly increased to 1 7/8” and then unite at a larger more robust collector. The use of a bellow flex tube after the collector allows for better flow and flexibility during acceleration and keeps the system from developing cracks over exceptionally rough terrain.
Designed to work exclusively with the AP header, the Agency Power muffler uses the factory exhaust mount locations to install for a direct bolt-on fit. The performance resonator muffler outlet has been designed with integrated spark arrestors into the exhaust tip. The polished and titanium exhaust tip gives a show finish to the rear end of the Wildcat XX. The machine now has an aggressive look with a satisfying sound.
The Agency Power header and exhaust also saves weight. The factory system tops out at 27lbs while the AP header and exhaust combo only weighs 21lbs. With this six pound savings, the sprung weight of the vehicle is reduced, making the job of the suspension easier.
In order to be sure of horsepower gain, the Textron Wildcat XX was run back to back on the dyno to keep all the variables the same except for the header and exhaust. On a UTV with a stock tune, the header and exhaust made a bolt-on gain of five horsepower. While this isn’t breaking any records, netting an additional five horsepower is tough to do on any modern UTV with a simple bolt-on exhaust and no modifications or tune. Overall, the header and exhaust is a great product to add as your first upgrade or during your build to improve power. The Agency Power Textron Wildcat XX Header and Exhaust Systems have been engineered to perfection!
***Exhausts are made here in our Arizona facility. Depending on demand we may have exhausts instock or it may take several weeks to fulfill orders. Please contact us if you have any time constraints.***
Features:
- Stainless Steel Constructions
- Precision TIG Welding
- Clean and Satisfying Sound
- Direct Bolt-On
- Weighs 21 lbs (6 lbs Less Than Factory)
- Spark Arrestor Integrated Into Tip
- Blued Titanium Tip
- Header, Muffler and Tip Included
- Bung For O2 Sensor
- Header Runners 1 7/8”
- Bellow Flex Tube
- Gain of 5 hp
- Dyno proven results
Notes:
- When Running a Spark Arrestor Screen Be Sure to Check On Them From Time to Time That They Are Free Flowing and Not Clogged Of Debris.
- Spark Arrestor Screens Will Need to Be Serviced Which Varies on Driving Conditions.
- View Installation Instructions Here
Fitment:
- 2018+ Textron Wildcat XX
A cold air intake kit on the Textron Wildcat XX can greatly improve the performance of your vehicle. It is a pretty common practice that a vehicles first modification includes intake, exhaust, and ECU tune. Modifying the Textron with a cold air intake will flow more air than the factory intake by design. This is due to the newly enhanced intake from Agency Power that features a high flow air filter to provide more CFM when the Wildcat needs it most. The factory air box is designed to accommodate the stock power and the everyday Textron driver. Unlike the stock air box or those other flow tubes that just cut the stock air box open, a complete cold air intake is the proper way to gain power without restriction. An intake needs to breathe while filtering out particulates. By removing the Donaldson air box, you are gaining better air flow and dyno proven power even without an ECU flash.
The Agency Power cold air intake has been engineered to be a direct replacement for the factory Textron Wildcat XX intake. Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. Starting from the top, the custom high flow Agency Power filter features a blue mesh design with AP logo end cap. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled as its media has sub-micron diameters and small inter-fiber spaces which result in more contaminants being captured. This filter is reusable allowing you to easily clean it between rides. To further provide the best air quality for off-road use, Agency Power has created an optional custom Outerwear brand pre-filter covers made specifically for the intake filter to be purchased separately.
After eliminating the heavy and bulky Donaldson filter and air box, the Agency Power intake features an aluminum intake tube that replaces the factory rubber tube. Each aluminum part is powder coated in a matte black for a clean and stylish finish. AP silicone coupler and clamps are included to make the kit an easy bolt-on.
To show the performance of the Agency Power intake, we tested a Textron Wildcat XX back to back keeping all the variables the same except for the intake. On a UTV with a stock tune, the intake made a bolt-on 5 horsepower. Making a simple 5 horsepower is tough to do on any of these UTV’s with bolt-on parts outside of the exhaust and ECU tune. This is because of the much improved air flow over the stock box. Overall, the intake is a great product to add as your first upgrade or during your build to improve power. The Agency Power Textron Wildcat XX Air Intake has been engineered to perfection!
Features:
- High Flow, Reusable Air Filter
- Aluminum Intake Tube
- Black powder coat finish
- Silicone Coupler With Clamps
- Simple Bolt On
- Gain of 5 hp
- Dyno proven results
Notes:
- For Extra Filter Protection, Purchase the Agency Power Pre-Filter By Outerwears – Learn More
- Understanding cleaning and filter technology – Read Here
- View Installation Instructions Here
Fitment:
- 2018+ Textron Wildcat XX
The Agency Power front bumper for the Honda Talon is designed to provide vehicle protection you want while keeping a great look to your UTV. The bumper consists of 1.5"x .095" wall steel tubing that has been digitally designed to flow with the Honda Talon rear shape. Each bumper features laser cut flanges and precision welds to ensure a perfect fit while maintaining quality. The bumper extends out and up providing necessary bracing to help protect you and your machine. All bumpers are Made in the USA designedspecifically for the Honda Talon 1000R or 1000X. Agency Power offers these bumpers in a Gloss Red or Gloss Black powdercoat to mesh with the stock Honda colorway. Whether you are racing, cruising the dunes, or trail riding, the Agency Power rear bumper is a great add-on for function and style.
Features:
- Increased Chassis Protection
- 1.5" X .095" Thick Tubing
- Follows Factory Styling
- Mild Steel for Durability and Sheer Strength
- Direct-Fit Bolt-On Installation
- Powder Coated for Durability
- Laser-Cut Agency Power Logo
- Weight 21.45 lbs
Fitment:
- Honda Talon 1000R 2019+
- Honda Talon 1000X 2019+
- Honda Talon 1000X-4 2019+
Notes:
The Agency Power front bumper for the Honda Talon is designed to provide vehicle protection you want while keeping a great look to your UTV. The bumper consists of 1.5"x .095" wall steel tubing that has been digitally designed to flow with the Honda Talon rear shape. Each bumper features laser cut flanges and precision welds to ensure a perfect fit while maintaining quality. The bumper extends out and up providing necessary bracing to help protect you and your machine. All bumpers are Made in the USA designedspecifically for the Honda Talon 1000R or 1000X. Agency Power offers these bumpers in a Gloss Red or Gloss Black powdercoat to mesh with the stock Honda colorway. Whether you are racing, cruising the dunes, or trail riding, the Agency Power rear bumper is a great add-on for function and style.
Features:
- Increased Chassis Protection
- 1.5" X .095" Thick Tubing
- Follows Factory Styling
- Mild Steel for Durability and Sheer Strength
- Direct-Fit Bolt-On Installation
- Powder Coated for Durability
- Laser-Cut Agency Power Logo
- Weight 21.45 lbs
Fitment:
- Honda Talon 1000R 2019+
- Honda Talon 1000X 2019+
- Honda Talon 1000X-4 2019+
Notes:
